View Full Version : Dual Exhaust
NEWBMAZDA
05-06-2009, 09:59 PM
does anyone have dual exhaust on their MSP??? i am just wondering...
blkspdfreak
05-06-2009, 10:02 PM
i was looking into it because of my kit but there is not much room back there. there is one on the forums but it was a regular protege. sounded really good too
GiJoe
05-06-2009, 10:30 PM
it would basically just be for looks... if you did put a new pipe on the driver side it wouldnt have near the flow the origanl pipe would... theres just not enough room to run 2 pipes from the dp dack... youd have to place it right before the axel or right after, it wouldnt make much sence to run it after the axel. but I dont think there is clearance to run it befor the axel...
Ricktalife
05-06-2009, 10:30 PM
leave that to cars that put down more power.
GiJoe
05-06-2009, 10:32 PM
+1 I did leave that out of my post...
dominoy2k1
05-06-2009, 10:50 PM
looks nice.
http://www.msprotege.com/forum/showthread.php?t=123673476
http://www.msprotege.com/forum/showthread.php?t=119030
magnumP5
05-07-2009, 02:39 PM
leave that to cars that have more cylinders.
Fixed
Outlawstar98
05-07-2009, 07:35 PM
Eh, Theres no use for duel exhausts at all with our cars, Its no V6. We just need a 3" Exhaust and we will do fine, and that duel exhaust posted, i wouldn't do that it looks tacky because it doesn't help performance :(
zuku26
05-07-2009, 08:45 PM
The dual tips would be only a show piece and have no real performance gains. Which is why it may have originally be posted in the appearance section instead of the performance section
Ricktalife
05-07-2009, 09:09 PM
Fixed
that works too. LOL.
SeR_Cyclops
05-07-2009, 09:25 PM
This is RICE!!!!
NEWBMAZDA
05-07-2009, 10:24 PM
Ok I guess I would just put in a three inch exhaust
kicknmazdaspd
05-08-2009, 11:37 AM
Eh, Theres no use for duel exhausts at all with our cars, Its no V6. We just need a 3" Exhaust and we will do fine, and that duel exhaust posted, i wouldn't do that it looks tacky because it doesn't help performance
So anything that doesn't help with performance is automatically tacky???
blkspdfreak
05-08-2009, 01:24 PM
ive got 3'' from the pre-cat back and it sounds great. as long as you have it done right, you can pull the dual exhaust look off.
Wagonbacker9
05-08-2009, 04:11 PM
if it looks good, then theres no harm. personally I would never do it just because I see it as wasteful.. buy one NICE muffler for the price of 2 shitty ones and it'll sound better.
WIMSPWI
05-08-2009, 05:39 PM
if it looks good, then theres no harm. personally I would never do it just because I see it as wasteful.. buy one NICE muffler for the price of 2 shitty ones and it'll sound better.
not true...you can get a sick quiet sound with two :)
but i go for obnoxiously loud(flame)
Wagonbacker9
05-08-2009, 05:40 PM
yeah, but you gotta spend a LOT of money... 2 good quality mufflers... no thanks.
zuku26
05-08-2009, 07:36 PM
or one good muffler and 2 pipes pipes leading to the bumper with 2 nice tips!!! but either way, performance wise a solid 3" is overkill on most MSPs on here anyway. Most of you guys running the T25 with boost below 10 PSI would be better off with catless 2.5" exhaust
Ricktalife
05-08-2009, 08:43 PM
Most of you guys running the T25 with boost below 10 PSI would be better off with catless 2.5" exhaust
but our self esteem wouldn't.
zuku26
05-08-2009, 08:57 PM
lol true!!
WIMSPWI
05-08-2009, 09:32 PM
thats why i run a corksport midpipe to 3" apexr1 back half. sounds great and drives like a 2.5" but top end i feel more power than just the corksport itself. not to mention it sounds WICKED! :)
Cruzanspeed
05-09-2009, 11:56 AM
I'm running 3" GHL turbo back... But then I'm running gt28rs at 13psi!
WIMSPWI
05-10-2009, 11:10 AM
I'm running 3" GHL turbo back... But then I'm running gt28rs at 13psi!
stock block? hope not...eeek
my motor: (burn)
Cruzanspeed
05-10-2009, 09:34 PM
Well its been running that way for years! Daily drivin!! And yes its stock block...
GiJoe
05-10-2009, 10:42 PM
all that money into mods an no internals... you could have bought pistons and rods 2 times over for the price of that GHL lol...
zuku26
05-10-2009, 11:33 PM
lol, but that GHL is the sex!!!
Cruzanspeed
05-11-2009, 08:33 AM
Well I sent 2300 on all my mods ie gt28rs, perrin intercooler, cold air intake, MAM manifold, & my "GHL" & much more!!! Oh & have a short bock with internals sitting in the garage so when I blow it up! So no problem. "GIJOE"
Ricktalife
05-11-2009, 08:34 AM
Well its been running that way for years! Daily drivin!! And yes its stock block...
jesus man i hope you don't take long trips. that way when you are driving down the road and your engine takes a shit you won't have to tow it far.
Cruzanspeed
05-11-2009, 08:42 AM
Like I said running that way for years! I drove it from Florida to Oklahoma, Oklahoma to El Paso, Tx & back to Oklahoma. So when it blows it blows... Everything blows sometimes.. Just my time hasn't arrived yet!!lol
GiJoe
05-11-2009, 09:29 AM
lol, but that GHL is the sex!!!
lol and I can make one for free lol...gotta love have pull at work... but I am interested in how they designed theres, hopeing it explains there price tag...
GiJoe
05-11-2009, 09:30 AM
hey cruz what part of OK is ft sill in? when that motor does blow I'd be willin to help ya out with the short block.
Cruzanspeed
05-11-2009, 12:54 PM
Thanks... We had a meet back in March in OKC then somehow ended up in Tulsa. We should have a next 1 soon. You should come out if you can. Ft. Sill is in Lawton.
Powered by vBulletin® Version 4.1.7 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.