PDA

View Full Version : Sub Box Install



Subsparx
04-30-2009, 10:08 PM
So I took the stock sub enclosure out of my car due to tire rubbing (I'm running wider tires so the weight loss helped with that). I'm getting my fenders rolled tomorrow and want to put the stock sub enclosure back in, but I forgot the order that the three wires go in (the thin wires with the screws, not the large rca style white and red cables). Can anyone help me out with that?

tweakingmsp
05-01-2009, 12:14 AM
If I remember right, the colors should be yellow, black and blue.
Yellow=power
Black=ground
Blue=remote

Subsparx
05-01-2009, 12:20 AM
Yeah, that's what I figured it was. Alright so in that case I have a blown sub or a blown amp. Is there an easy way to figure out which case it is?

Wagonbacker9
05-01-2009, 12:36 AM
try driving the sub with a known good signal source.. home stereo etc... if it lights up... its the amp, if not, likely the sub...
unfortionately with this setup, very well could be either. they both suck.