Help

[johnblaze]

I have a 2002 mazda protege5 auto. I checked the spcs and found that the p5 and the p speed was the same spcs so I put a turbo on it no internal upgrades no boost controller just a t3/t4 turbo and exhaust Im having probles making it run right im sure there is more thing to do. Do I have to upgrade my ecu or injectors what is the compression ratio between my car and the speed. I asked about getting it tuned they said I need a safc but with my car the map sensor dont always listen to the ecu so what is it that I have to do please help me thank you

[speedracer]

there are plenty of threads on here that cover everything you need to do to turbo your P5. lots of PPl have done it. I would put in a search for that. It's a good place to start. Plus it will be a great reference tool for ya too.

[Outlawstar98]

Wrong section, this is for MSP help, moving to correct location.

[bazooka joe]

you have an auto tranny? you need a way of adding fuel once you go into boost or you'll blow you engine...i'm running a begi rising rate fuel pressure regulator and a flying miata voltage clamp to trick the stock ecu into thinking everything is normal....by the way this should be moved to the FI section i believe? pm me with any questions..

[johnblaze]

Wrong section, this is for MSP help, moving to correct location.

well it is turbo and it is a protege but thanks for the help anyway