LSD Bearings help

[NEWBMAZDA]

WELL LIKE TWO WEEKS AGO MY LSD BROKE,AND NOW I GOT A NEW WELDED LSD BUT I WANTED TO KNOW IF ANYONE CAN HELP ME OUT ON HOW TO REMOVE THE BEARINGS OF THE OLD ONE... THEY ARE STILL IN GOOD CONDITION... BUT I HAVE NOT FIGURED OUT HOW TO REMOVE THEM

Can anyone help me????

[MSP4G63]

Buy new ones their cheap and you might want to replace the races in the transmission too not good to reuse those parts especially when their cheap. The new welded lsd didn't come with bearings or races? Mine did.

[NEWBMAZDA]

which one are the races

[Prodigy]

The races are the reverse tapered edges of the bearings. (which are included with the bearing part #G5R0-27-350B)

Either get a bearing separator with a 3-jaw puller/shop press....or use a dremel to cut the bearing off.

[NEWBMAZDA]

oh i see but i still can use the one that the original differential had

[Prodigy]

I wouldn't.
The bearings tend to shatter when they're worn down, especially if you mix the races.

[NEWBMAZDA]

but thats the thing they are still in good condition

[Prodigy]

Unless they have less than 10,000 miles on em, I still wouldn't reuse them.
I've seen reused bearings shred apart a new trans even though they were in good condition.

[NEWBMAZDA]

oh ok then thanks for your help... i will buy new ones