PDA

View Full Version : are these numbers from dashhawk good or bad?



black_ninja23
04-11-2009, 12:19 PM
I recently had a chance to play around with the dashhawk last night, so I was driving on the freeway and decided to see how my boost holds. here are some screens, they are all the same except different readings. My concerns:
1. Boost spike from first screen.
2. The line of the fuel pump pressure.

My boost is at 16.09-16.39 and my AFR seems to be holding just fine...probably could lean it out a bit more if I want more power, right?

I've been on the fence about getting an AP to squeeze a bit more power out of this car. Currently i have an ETS 3.25 TMIC and CP-E Nano.

any comments, suggestions are appreaciated.(rockon)

http://i702.photobucket.com/albums/ww24/black_ninja23/screen1.jpg

http://i702.photobucket.com/albums/ww24/black_ninja23/screen2.jpg

http://i702.photobucket.com/albums/ww24/black_ninja23/screen3.jpg

http://i702.photobucket.com/albums/ww24/black_ninja23/screen4.jpg

SubieKiller3
04-11-2009, 03:10 PM
looks pretty normal to me.

aaronc7
04-11-2009, 05:28 PM
u want actual AFR , not commanded

dkswim
04-13-2009, 03:23 AM
u want actual AFR , not commanded

what he said
comand is what the ecu is trying to make