anybody got racing seats?

[SCMP3]

i would like to see pics of racing seats in peoples msp's and proteges in general. im looking at some sparcos i wouldnt mind haveing. also anyone have the back seat roll cage? also would like to see that. so let the pics commence

[ScratchNSniff]

For someone without money you think big...lol...I am sure you have seen mine...and I have an extra set FS...

[MSP2024]

there is tons of pics out there bro just got to look
here is a few i found

http://i155.photobucket.com/albums/s283/tech_022/100_5861.jpg
http://i155.photobucket.com/albums/s283/tech_022/3257610163_c5c629f116_b.jpg
http://i155.photobucket.com/albums/s283/tech_022/GetAttachment.jpg
http://i155.photobucket.com/albums/s283/tech_022/ajd.jpg

[blueprotegelx]

What type of sparcose Red ones and the one black one? Out of Curiosity what kinda money do 1 one of those cost? I'd love to have a sparco seat. I sat in one a while back and it was amazing comfort and stability wise.

[MSP2024]

they are both the sparco torino, its 599 http://www.jaydm.com/sparco/seats/torino.htm

[Outlawstar98]

http://www.sparcousa.com/seats_street.asp

All the street seats they have there with their pricing for new ones.

I want the FIGHTER 's

[SCMP3]

For someone without money you think big...lol...I am sure you have seen mine...and I have an extra set FS...

i know. i want seats tlike the one in spikes rx7. and thanks for the pics

[lasermp5]

You're going to be able to find hundreds of pictures if you search.

http://c4.ac-images.myspacecdn.com/images02/17/l_84bbdda3817d4319b69ab6ddfab5f163.jpg

my jdm goodness... too bad they don't make them anymore. If you see one, it's mine... I called dibs lol

[_Slotegé_]

http://i206.photobucket.com/albums/bb218/slotege/SEATS.jpg

http://i206.photobucket.com/albums/bb218/slotege/SashasCam002.jpg


:)

[boostdprotegelx]

sparco torino.. ugly autopower roll cage.


http://i25.photobucket.com/albums/c91/Boostdprotegelx/The%20Protege%20Story/protege98.jpg
http://i25.photobucket.com/albums/c91/Boostdprotegelx/The%20Protege%20Story/protege99.jpg
http://i25.photobucket.com/albums/c91/Boostdprotegelx/The%20Protege%20Story/newwheel.jpg

[Outlawstar98]

LOL that cage looks beet around, when I get it im going to re-powdercoat it and make it looks much better then that :P

[boostdprotegelx]

LOL that cage looks beet around, when I get it im going to re-powdercoat it and make it looks much better then that :P

just the initial install sir. i can't find a powdercoater to do the whole thing.. plus, powdercoating is EXPENSIVE.

[Outlawstar98]

LOL, that cage would be 100-150ish. to get done for me :)

come up here to LPC :D they are out of landsdale, and do a bitchin job! (thats where im going to get my rims and GT Spec parts done at!!)

And can u put the rear seats all the way back with them? where do they bolt up at?? its confusing to me.

[boostdprotegelx]

LOL, that cage would be 100-150ish. to get done for me :)

come up here to LPC :D they are out of landsdale, and do a bitchin job! (thats where im going to get my rims and GT Spec parts done at!!)

And can u put the rear seats all the way back with them? where do they bolt up at?? its confusing to me.

i spent 600.00 on all of my gt spec parts to get powdercoated, and some small motor parts.. lol..

it mounts to the floor and behind the seat(where you would access the strut mount), it's FAIRLY straight forward. i installed it by myself in a cold as shop in about 18degree weather.. now i have to take it out, and weld it in..

yes, the seats will work, they push up against the bar, so i'm going to pull out some of the seat padding it'll be bitchin.

[Outlawstar98]

so your going to weld it, how can you weld it and have it powdercated? cause if i do get that im going to get it welded in. But i also want it to be gold :) (to match my rims and GT spec parts)

[SCMP3]

really dumb question but are people gonna be able to sit in the back seat with the cage? and how does it attach? and are you guys able to use the stock seatbelts on the aftermarket seats? or is it stricktly harnesses?

[MSP2024]

could someone be back there,yes,comfotably,no
and yes you can use the seat belt, look at some of the pics there using the normal one

[boostdprotegelx]

powdercoat first i suppose. or paint... and then weld. it'll work..

and scmp3- as far as CAN people... yes people CAN sit in the back. but i'm going to have harnesses.. cuz if i were to wreck and someone in the rear hit their...any part of their body on the metal it'd break. lol. so i'll be having hardcore harnesses. and prolly some of that foam stuff to cover it.

[Outlawstar98]

Once i get the cage, F' people sitting in the back HAHA, they arnt allowed. Unless they sign a waver haha

And I could always get it powdercoated, then welded on, and the weld marks up to about 3" i can just paint them black :D give it some style.

[boostdprotegelx]

Once i get the cage, F' people sitting in the back HAHA, they arnt allowed. Unless they sign a waver haha

And I could always get it powdercoated, then welded on, and the weld marks up to about 3" i can just paint them black :D give it some style.

true.. but where it's welded....will be covered anyways.. by the carpet, and by the seat..

[Outlawstar98]

true.. but where it's welded....will be covered anyways.. by the carpet, and by the seat..

True true, Ill prob get new carpet put in also ( i want new black carpet and black headliner haha)

[SCMP3]

ok. about the seat belt. doesnt the stock seatbelt buckle mount to the seat? how would that work?

[boostdprotegelx]

True true, Ill prob get new carpet put in also ( i want new black carpet and black headliner haha)

i have black carpet.. i painted my headliner black with the upholstery paint. worked very well

[boostdprotegelx]

ok. about the seat belt. doesnt the stock seatbelt buckle mount to the seat? how would that work?

i still have a rear seat.. and no.. none of the belts mount to the seat. it mounts to the body of the car, under the seat.

[Outlawstar98]

Yeah, I also am going to get my B pillars (where seat belt is) overlayed in carbon fiber, and the rear window table thing HAHA. :)

[boostdprotegelx]

Yeah, I also am going to get my B pillars (where seat belt is) overlayed in carbon fiber, and the rear window table thing HAHA. :)

awesome. i plan on gettin joe(crazy caker) to do some custom CF for me, including the roof cap(has to be custom for me) and the b and c pillars in cf.. i already have A pillars.

[Rush]

How about we don't spam the OP's thread with off topic stuff?

[boostdprotegelx]

How about we don't spam the OP's thread with off topic stuff?

that's fine. he's been apart of the discussion to an extent too though..

[SCMP3]

its fine. im trying to find info out

[SCMP3]

You're going to be able to find hundreds of pictures if you search.

http://c4.ac-images.myspacecdn.com/images02/17/l_84bbdda3817d4319b69ab6ddfab5f163.jpg

my jdm goodness... too bad they don't make them anymore. If you see one, it's mine... I called dibs lol

in this pic the person has a harness bar. i would much rather have that than a cage. where would i get one? how are the mounted?

[ScratchNSniff]

You can get that one off of Ebay...it is the WRX bar IIRC...

[SCMP3]

hmm may have to look into that.

[TampaBlackMSP]

What do you guys know about the seat brackets? I can't stand how high up I feel sitting in the crappy stock seat. I'll likely get a single Torino to start with, but am just not sure about the brackets - any thoughts? Thx!

[boostdprotegelx]

What do you guys know about the seat brackets? I can't stand how high up I feel sitting in the crappy stock seat. I'll likely get a single Torino to start with, but am just not sure about the brackets - any thoughts? Thx!

i actually think i'm going to sell my torino... you need the sparco slider, and i think wedge engineering brackets.. they work. and they're SUPER low.. i used some risers for my seat, i like to sit higher.

[Outlawstar98]

LOL, my seat is High as F---! haha

I dont have any good pics of them though, so thats why I didnt post them.

But i plan on getting sparcos one day... I just need the money. But does anyone know how much the sliders and brackets cost?

[boostdprotegelx]

LOL, my seat is High as F---! haha

I dont have any good pics of them though, so thats why I didnt post them.

But i plan on getting sparcos one day... I just need the money. But does anyone know how much the sliders and brackets cost?

i think the wedge brackets are like.. 150? for both or so.. and the sliders are prolly about the same.

[Outlawstar98]

k thx man. I always asked around but no one ever answered me. haha

[boostdprotegelx]

k thx man. I always asked around but no one ever answered me. haha

no problem. sparco shit is $$$. sucks, but also doesn't.. wonder how much i could get for my sparco..

[mspHtown]

if you have a titanium msp, the black/grey sparco torinos look amazing.


here are a few pictures, i put them in a word document a long time ago for some reason.

[SeR_Cyclops]

Dude those are freaking sick!!!

[SCMP3]

i cant look at the pics:(

[boostdprotegelx]

those are the ones that i have.. well i have one.. READY TO GO! for sale.

[yellowmsp035]

my Sparco Monza seats

the rears are also done to match the fronts and have Sparco in the rear headrests.. i have no pics of them yet though

(i have redone all the yellow suede in black alcantara (door inlays, headliner) and repainted the yellow trim gloss black since i put the red seats in so it looks a lot better)

http://img166.imageshack.us/img166/6375/img0001uy2.jpg

http://img523.imageshack.us/img523/7531/img0003xa5.jpg

http://img529.imageshack.us/img529/4762/img0002iq4.jpg

[SeR_Cyclops]

What short shifter is that?

[yellowmsp035]

haha its the stock msp shift linkage... its just not connected to anything under the hood haha

there is no engine/tranny in the car still.. this is my car while its being stored outside with the car cover pulled off to snap some pics. im still finishing up a couple small things with the new engine and turbo setup

i figured someone would ask that haha

[SCMP3]

those look good. anybody know how the wrx/sti harness bars connect?

[TampaBlackMSP]

i actually think i'm going to sell my torino... you need the sparco slider, and i think wedge engineering brackets.. they work. and they're SUPER low.. i used some risers for my seat, i like to sit higher.

If you decide to sell, pls. consider pm'ing me. :)

[TampaBlackMSP]

those are the ones that i have.. well i have one.. READY TO GO! for sale.

I didn't see this before I replied before - now pls. hit me up!

[ScratchNSniff]

The bars connect by two points behind the center console and to the bolts where the top of your seatbelts connect on the B-Pillar...

[SeR_Cyclops]

is their any modifications that need to be done to make the bar fit?

[SeR_Cyclops]

http://cgi.ebay.com/ebaymotors/Mazda-Protege5-MP5-99-03-Seatbelt-Harness-Bar-00-01-02_W0QQcmdZViewItemQQ_trkparmsZ72Q3a570Q7c66Q3a2Q7 c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1 Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem29 0299442047QQitemZ290299442047QQptZMotorsQ5fCarQ5fT ruckQ5fPartsQ5fAccessories

[bschatz2]

Here's mine

http://i42.tinypic.com/14iokkw.jpg

http://i43.tinypic.com/2i08xo2.jpg

[boostdprotegelx]

Here's mine

http://i42.tinypic.com/14iokkw.jpg

http://i43.tinypic.com/2i08xo2.jpg

ebay kind.. are they comfy?

[bschatz2]

Yeah they aren't bad lol I wouldn't mind some Brides but they are just too much money and I'm happy with these

[boostdprotegelx]

Yeah they aren't bad lol I wouldn't mind some Brides but they are just too much money and I'm happy with these

gotcha. yeap. well good shit.

[Outlawstar98]

I want one of the carbon fiber seats from sparco..... Sooooo expencive though!! Haha

[yellowmsp035]

i want the Bride Gias w/ carbon kevlar back... those are my next seats, but 2200cdn each.. :)

[boostdprotegelx]

i want the Bride Gias w/ carbon kevlar back... those are my next seats, but 2200cdn each.. :)

ouch man.. nice as shit though.. did you get my pm the other day??

[yellowmsp035]

yes sir i sure did..

[boostdprotegelx]

yes sir i sure did..

oh.. just wondering.. cuz i didnt get a reply:( no one's buying shit. i want my msp!

here's my sparco i'm prolly gonna sell btw...


http://i25.photobucket.com/albums/c91/Boostdprotegelx/parts1014.jpg

[Ricktalife]

clean that shit up man! your seat looks pissed off.

[blueprotegelx]

how much you looking at getting for the seat boostdprotegelx

[boostdprotegelx]

clean that shit up man! your seat looks pissed off.

i know it's dirty.. come on fellas!! everyone knows i dont have a car, i can hardly get to my shop!

blue, pm me an offer man. i just took the picture yesterday... so it's ready to go, i'll vaccum it and everything beforei ship it.!

[boostdprotegelx]

dead thread?

rofl. i think i'm looking at 400.00.. shipped, depending on where to.

[TampaBlackMSP]

Yo! Just sent you a pm a little while ago. Thx.

[boostdprotegelx]

replied.