forge bpv o ring messed up PICS INSIDE!!

[ms6acton]

so i bought this bpv used from a member and i got it a few weeks ago. i havent been holding boost (spiking 15ish holding 12-13) i went to go change the spring out yesterday and try a different combo and when i unscrewed the top i noticed the o ring was now a c ring. and the reason it took me so long to change the spring since i got it is because i had surgery last tuesday and havent driven the car since yesterday.

anyone kno where i can get a o ring that size? and its pretty shitty to buy broken stuff :(

http://img4.imageshack.us/my.php?image=075ach.jpg
http://img4.imageshack.us/my.php?image=074g.jpg

[terbow]

Get it right from forge USA. with something like that you want to make sure you use the exact piece.

[ms6acton]

yea i just emailed them. just sucks that i even have to ):

[Atreyu3388]

Your best bet would be to take a trip to your local hardware store and they can measure the ID, OD and wall thickness of the O-Ring and give you a perfect replacement. I could almost guarantee it'll be cheaper too. With something like an O-Ring, you are dealing with such a universalized industry, it is difficult to go wrong.

Just my $.02

[sunshineFC]

Agreed, it wont be hard to find one at a well stocked hardware store. Or, better yet, check on McMasterCarr.
-a

[tunersteve]

Contact patty at forge via PM if you can as well.

When you do get the info for the O-ring, post it up. There are plenty of guys running that BPV, so I'm sure this will be a common problem at some point.

[ms6acton]

yea ill shoot patty a pm, and also check out home depot tongiht. once i figure everything out ill post it up (:

[xandrake]

Mine is mangled as well. Damn it.

[ms6acton]

ive emailed forge 3 times and tried calling once.. no response. havent heard from patty yet either :(

[chiefmg]

I had the same problem with mine. Forge did come through with a new one for me, when I put it on the second time I put a couple of dabs of silicone (very small) in the groove to keep it in place. That worked great.

[ms6acton]

I had the same problem with mine. Forge did come through with a new one for me, when I put it on the second time I put a couple of dabs of silicone (very small) in the groove to keep it in place. That worked great.

awesome.. thanks for the advice. will defin do this once i get a replcment one

[Captain KRM P5]

if you have not reached Pat, send me a pm and i will get you a ring

[ms6acton]

so i got in contact with patty from forge a week ago and he sent me 3 new ones out and i got them today. so i guess anyone else with this same problem just contact forge and theyll send u some new ones right away (:

and thanks anyways ken!

[turbos3]

I had the same problem with the o ring. i emailed pat at forge and within 30 mins i had new ones on the way. Great customer service.