FS: Twiggy cams+more MSP/aftermarket parts

[TurbomanProtege]

I've sold a whole bunch of parts here before. now I gathered more parts that I had sitting around. Im not trying to do dibs, unless very serious, so first one with money gets it and if you're interested or have a question just PM me. Im horrible at getting pricing so everything is obo....

Twiggy cams--sold
microtech LT8--800 shipped
stage 3+ spec clutch--340 shipped
MSP valve cover--sold
MSP front speakers--40 shipped
MSP engine cover--45 shipped
MSP(1) crankshafts--make offer
MSP intercooler--60 shipped
MSP(2) oil pump--80 shipped
MSP(2) water pump--50 shipped
MSP axles--305 shipped
gauge holder--sold


twiggy cams
sold

microtech LT8
http://i324.photobucket.com/albums/k338/turbomanpro/Picture008-1.jpg

spec clutch 3+
http://i324.photobucket.com/albums/k338/turbomanpro/Picture009-1.jpg

valve cover/speakers
http://i324.photobucket.com/albums/k338/turbomanpro/Picture007-1.jpg

engine cover
http://i324.photobucket.com/albums/k338/turbomanpro/Picture011-1.jpg

2 MSP crankshafts
http://i324.photobucket.com/albums/k338/turbomanpro/Picture010-1.jpg

msp intercooler
http://i324.photobucket.com/albums/k338/turbomanpro/Picture006-1.jpg

MSP oil pump
http://i324.photobucket.com/albums/k338/turbomanpro/Picture005-1.jpg

MSP axles
http://i324.photobucket.com/albums/k338/turbomanpro/Picture003-1.jpg

gauge holder
sold

[racerx43269]

PM'd bout the gauge holder

[TurbomanProtege]

PM'd bout the gauge holder

sold to you lol

[el_Don]

Are the twiggy's for the NA or the turbo?

[Konspire77]

Pm sent

[TurbomanProtege]

Are the twiggy's for the NA or the turbo?

they are FI (turbo) twiggys


Pm sent

PMed back

[TurbomanProtege]

bump... I know somebody want these twiggys

[JCell]

how much for the cranks?

[TurbomanProtege]

make me an offer on them

[JCell]

are they good? i dont need a crank, just want one for a house project im working on...

[TurbomanProtege]

yea they are good cranks

[JCell]

nm then, good luck with the sale

[TurbomanProtege]

thanks were you looking for a bad crank

[JCell]

pretty much, i wanna make a table so im not looking to spend too much on it

[TurbomanProtege]

well one of them need machining cuz it came off my blown motor but Im not looking for to much for them

[18sOnAiR]

Free block and good crank, if I buy the twiggy cams? I'll pick up no need to ship.

[TurbomanProtege]

Free block and good crank, if I buy the twiggy cams? I'll pick up no need to ship.

I can probably throw in the block and give you a discount on the crank if you buy the cams

[Ice88]

Willing to ship cams to AUS?

[TurbomanProtege]

I dont see why not

[TurbomanProtege]

bump for great products and prices I know somebody wants to get something

[Maxx Mazda]

Are these cams the "fixed" ones with the welch plugs and all that already? I'd probably take them and whichever crank is better.

[TurbomanProtege]

I dont know what you mean "fixed" cams but they are good cams, and you can make me an offer on the crank

[Maxx Mazda]

Basically there were 2 batches, the first set wouldn't fit the car and had to be sent back to be reground, then when they were sent back to the customers they were all missing the welch plugs, and the second batch supposedly turned out alright, they forgot the welch plugs...

[LordWorm]

Are these cams the "fixed" ones with the welch plugs and all that already? I'd probably take them and whichever crank is better.

They were all "fixed" by elgin - there shouldn't be a single set out there now which is problematic.

The dimensions on the welch plugs were worked out, see the install thread (they are a standard ford something or other welch plug from memory).

[TurbomanProtege]

Im guessing its the second batch cuz when I got it I just changed the shims and threw them on with no problems and they have less then 6k miles on them

[Maxx Mazda]

That's all I needed to hear. That they'd work without alot of fuckin' around.

[TurbomanProtege]

yup so you going to buy it?

[TurbomanProtege]

bump(bump)

[TurbomanProtege]

bumpity

[TurbomanProtege]

still some great stuff for sale

[TurbomanProtege]

who wants to jump on the twiggys???

[TurbomanProtege]

bump for price change

[TurbomanProtege]

no body wants to make me an offer on anything???

[ogsp5]

Might want to lower the price on the LT8. You can get a new LT10 for $760 from down under.

[TurbomanProtege]

thanks for the advice, but my prices are OBO but I dont know why nobody wants to jump on the twiggy cams, and whats weird that someone just sold his twiggy for more then mine and I had mine for sale before his

[Cruzanspeed]

I wish I had the money!!

[TurbomanProtege]

me too, if I had the money I wouldn't be selling the parts lol

[Metallic36]

His Twiggys were brand new, weren't they? I'd be all over that clutch if it was new.. but I just can't see buying it and *hoping* it will work okay after spending the money.. I guess the same goes for the Twiggys. (dunno)


thanks for the advice, but my prices are OBO but I dont know why nobody wants to jump on the twiggy cams, and whats weird that someone just sold his twiggy for more then mine and I had mine for sale before his

[StealthWyvern]

Why are you selling the twiggys?

[TurbomanProtege]

His Twiggys were brand new, weren't they? I'd be all over that clutch if it was new.. but I just can't see buying it and *hoping* it will work okay after spending the money.. I guess the same goes for the Twiggys. (dunno)

his might of been new but mine is price is cheaper, and all my stuff works they have around 6K miles on them so its bearly used


Why are you selling the twiggys?

I need the money times are hard, and I got a son to support with his 2nd birthday in a couple weeks

[TurbomanProtege]

bump times a trillion lol

[TurbomanProtege]

bumpppppp

[blkonblkMSP]

his might of been new but mine is price is cheaper, and all my stuff works they have around 6K miles on them so its bearly used



I need the money times are hard, and I got a son to support with his 2nd birthday in a couple weeks

Pm sent in regards to the cams Oh! and is there anything wrong with them? and wat would be the difference of me just purchasing stock cams rather than yours? wat is the gain out of them? very interested buyer here,lmk

[TurbomanProtege]

there is nothing wrong with them just need the money rather then power lol. and there is a huge difference between these and stock cams gain huge number more on the top end, and you can hear it in the exhaust its very nice

[Alejo_NIN]

how much for driver side cv-axle?

[TurbomanProtege]

^ PM sent

[TurbomanProtege]

everything still avaliable bump

[Alejo_NIN]

you know that axle is mine!

[TurbomanProtege]

lol yea you do

[TurbomanProtege]

finally sold the twiggys hip hip hooray (nana)(drinks)(drive2) now who wants my other goodies

[TurbomanProtege]

bump

[JayDubb]

Selling engine cover with the brackets?

[TurbomanProtege]

the bracket for the engine cover is build into the MSP valve cover

[Alejo_NIN]

great seller!
bumpity bump!
met the guy yesterday
hand delivered the part to my house.!

[TurbomanProtege]

thanks man for the support

[TurbomanProtege]

bumpppp

[TurbomanProtege]

just sold one of the crankshafts still have one more available

[TurbomanProtege]

Bump

[TurbomanProtege]

bumpity

[TurbomanProtege]

bumppppp