PDA

View Full Version : Testing some 17x9 +42 DPT's on a Mazda 3


WheelDude.com
02-05-2009, 08:45 PM
worked great...slightly rolled fenders and 245 tires :)

Matte Steel Grey:
http://www.wheeldude.com/gallery2/d/101617-1/IMG_9499.jpg
http://www.wheeldude.com/gallery2/d/101613-1/IMG_9498.jpg
http://www.wheeldude.com/gallery2/d/101604-1/IMG_9489.jpg
http://www.wheeldude.com/gallery2/d/101625-1/IMG_9502.jpg

Hyper Black:
http://www.wheeldude.com/gallery2/d/101568-1/IMG_9506.jpg
http://www.wheeldude.com/gallery2/d/101584-1/IMG_9510.jpg
http://www.wheeldude.com/gallery2/d/101592-1/IMG_9513.jpg

PM us if you are interested in ordering

Let us know what you think! :)

Zoeb
MM BOOST
02-05-2009, 08:49 PM
how was the clearance with the inside strut??? I am looking at a set of wheels and the rear wheel is 18x9 +43 offset, you think the extra inch would still be able to work on a ms3 with a 225 (stretched) or 235 tire and fender rolling?
WheelDude.com
02-05-2009, 08:50 PM
how was the clearance with the inside strut??? I am looking at a set of wheels and the rear wheel is 18x9 +43 offset, you think the extra inch would still be able to work on a ms3 with a 225 (stretched) or 235 tire and fender rolling?

we tried on a car with coilovers

we're trying them on a car with springs in a few days

Zoeb
Wastegate13
02-05-2009, 08:59 PM
Hellaflush approved! I am so happy to see more aggressive fitments on these Mazdas.
MakeMeGoFast
02-05-2009, 09:06 PM
Looks dam good, any side profile shots, like a picture from front of car looking down the side of car
WheelDude.com
02-05-2009, 09:10 PM
Looks dam good, any side profile shots, like a picture from front of car looking down the side of car

More pix here:
http://www.wheeldude.com/gallery2/v/newwheels/rotadpt/dpthblk/customercars/?g2_showId=101588

matte steel gray:
http://www.wheeldude.com/gallery2/v/newwheels/rotadpt/dptmtbrz/album/?g2_showId=101600
MakeMeGoFast
02-05-2009, 09:22 PM
this is the shot I was looking for

http://www.wheeldude.com/gallery2/d/101572-1/IMG_9507.jpg
CnoTataymo
02-05-2009, 09:31 PM
Mack's car looks nice.

You want to try some on some coilovers? I'm free on Saturdays.
broncoblitz
02-05-2009, 10:00 PM
Mack's car looks nice.

You want to try some on some coilovers? I'm free on Saturdays.

Mack is on coilovers... now if he want's to try some on springs, well I'm free on saturdays too haha
CnoTataymo
02-05-2009, 10:18 PM
Mack's car isn't an MS3 (wink)
tigermack
02-06-2009, 01:54 AM
It's the same suspension. =D

These won't clear your strut without spacers.
CnoTataymo
02-06-2009, 12:15 PM
You going to get some Rota's Mack? (boom04)
Yoo Shin
02-06-2009, 12:56 PM
YES finally!!! Sorry wheeldude that I kept bugging you over on NASIOC about these.

Are you still planning to do a 18x9 DPT in a 40ish offset?
WheelDude.com
02-09-2009, 02:15 PM
YES finally!!! Sorry wheeldude that I kept bugging you over on NASIOC about these.

Are you still planning to do a 18x9 DPT in a 40ish offset?

Yes, we still plan on it eventually

Zoeb