please post pics of your 06-07 front lip

[dima_rus]

just like the title says post pick of your 06-07 front lip.

Thanks in advance

[dfskinner]

Hope this helps.......

http://i222.photobucket.com/albums/dd57/dfskinner/60114972-2sm.jpg

http://i222.photobucket.com/albums/dd57/dfskinner/60114972-3sm-2.jpg

[VenomDesign]

dfskinner , where's the lip ? lol :D

[dima_rus]

yeah man, thanks for posting your pics, but I'd like to see a front lip attached to your bumper. Just trying to get some ideas

[antlind]

Not the best of pictures....This is a front splitter that I've had installed for a couple years now.
This pic was taken this summer; unfortunately I smashed the lip last week in a snowy car park.
I have another splitter and a lip from Bayson-R at home so I have to decide which one I install next.
If you're interested in either one let me know as I may want to sell one of them.
The Bayson-R lip needs to be painted while the splitter can be installed without paint.
The Bayson-R lip is also made of a softer material which is more forgiving that the splittrer which is quite brittle...especially in -30C temperatures. It doesn't help that the car is also lowered.....
Rgrds,
Anthony

[zoomzoom mazda5]

Here's mine, it's over 2 yrs old now:
http://i159.photobucket.com/albums/t158/zoomzoommazda5/DSC00082.jpg
http://i159.photobucket.com/albums/t158/zoomzoommazda5/DSC00110-1.jpg
http://i159.photobucket.com/albums/t158/zoomzoommazda5/DSC00075.jpg

[dfskinner]

Oh, I see, sorry about that...... I didn't realize what you were asking to see.....

[nismospeed]

zoomzoommazda5 is that a bayson lip, if not what kind? i like the clean stockness of it very JDM

[zoomzoom mazda5]

I got it from someone else, but the bayson lip is the same.

[tillyspeed81]

do you have a problem with that lip scraping over driveways?

[atito]

I have the same set up as antlind.

Bayson R Splitter
H&R Springs & Mazdaspeed Camber Kit.

I also slapped on some mazdaspeed 3 rims and i still scrap on lots of things but its all good. The splitter is plastic and hollow. I'll post more pictures when the after a wash and the weather gets better.

http://www.msprotege.com/members/atito/CIMG4351.JPG
http://www.msprotege.com/members/atito/CIMG4347.JPG

[Jetmech]

That splitter looks good. I have the lip that Zoom Zoom has but haven't installed it yet. There is a pics of it installed here in the forums as I bought it off another member in Markham.

[sapacif]

Is the "front lip" sometimes called the "front air dam trim," a Mazda OEM item? Thanks.

[dima_rus]

Does anybody have this BaysonR lip on their MZ5??

http://i207.photobucket.com/albums/bb225/dimomazda/mazda5dsfl.jpg

can you post some pictures? How is the fitment?

[SMR_BB6]

see my avatar

[dima_rus]

see my avatar



hey man, can you please post the actual picture of that lip on your car, cuz it is a bit difficult to see it in your avatar.

Thanks
Dima

[zoomzoom mazda5]

do you have a problem with that lip scraping over driveways?

Sometimes, I just go very slow and have no problems

[tillyspeed81]

hmmm, you're not lowered are you? I am planning on dropping mine a little bit, not a problem for me, but my wife is who I am more concerned with. I purchased 19" rims this weekend so hopefully they help a little. I already scraped a little on steep driveways and that's stock height.... I'll post pics as soon as I paint the body kit.

[dima_rus]

since nobody could post a picture of the lip I wanted, I had to go ahead and try it myself.

Here is the picture if anybody needs to see how it looks on the car

http://i207.photobucket.com/albums/bb225/dimomazda/IMG_0062-2.jpg
http://i207.photobucket.com/albums/bb225/dimomazda/IMG_0063-2.jpg
http://i207.photobucket.com/albums/bb225/dimomazda/IMG_0064-2.jpg

[nftyper]

damn that looks hot.

[mothernature]

Yes it does and can act as a snow plough (pow)

[VenomDesign]

I really don't like this type of lip...doesn't flow with the line of the car. But i love your wheels :D

[jasma1]

Dima,

How are you going to manage driving the vehicle during winter season? I have the same GT as you and either I snowplow the streets sometimes, or I hit the underneath of the car, just by going over a speed bump! And all this, without any front skirt!

[dima_rus]

LOL, I will most likely remove the lip during the winter time. Mind you, I'm still planning on lowering the car for about an inch

[mothernature]

LOL, I will most likely remove the lip during the winter time. Mind you, I'm still planning on lowering the car for about an inch

Sir...you are nuts if you don't mind me saying (freak)

[lgreen]

WOW, It's sooo low, I'd be way too scared (peep) to add that. It wouldn't last the day. (blowup)

[Halo]

I really don't like this type of lip...doesn't flow with the line of the car. But i love your wheels :D

(iagree) Just makes it look 'busy' and tacked on. Maybe if it didn't have a 1/4" gap here and there.
Of course looks are subjective opinion, but what is the purpose of these sorts of posts if people can't give opinions.

[Kojack]

Im using the JDM front lip with the dmax rear....great combo imo...makes the car look "finished".

[VenomDesign]

Im using the JDM front lip with the dmax rear....great combo imo...makes the car look "finished".


Posts pictures (deadhorse :D

[redaxelaspeed]

here you go,i just put mine on yesterday along with the rims,going vip
http://i605.photobucket.com/albums/tt137/omar831_bucket/100_0366.jpg?t=1237570919
not sure how to post pics on this forum

[808mz5]

what drop do you have redaxelaspeed? Hows the ride? Looks tight..

[antlind]

here you go,i just put mine on yesterday along with the rims,going vip
http://i605.photobucket.com/albums/tt137/omar831_bucket/100_0366.jpg?t=1237570919
not sure how to post pics on this forum


Niceeeeee