FS: Going Back to Stock Sale

[Keno1542]

So I am going back to stock, everything will be up for sale in a short while. So keep checking back as I will be adding new stuff constantly.

No Dibs

All prices DO NOT include shipping. Only USA.

Everything will be first to pay gets it. Everything is OBO. Send me offers, I will not get offended, but will not waste my time on low balls either.

Paypal Only. Paypal addy will be PM'd once buyer is secured.

Everything is Sold AS IS

So lets get it started:

UPDATE

Passenger side Tail light for 99-03 Protege - Make me an Offer
http://i122.photobucket.com/albums/o259/keno1542/mazda_new/mazda_3_1_09/DSC01614.jpg
http://i122.photobucket.com/albums/o259/keno1542/mazda_new/mazda_3_1_09/DSC01613.jpg


Sold:

MSP Injen CAI(used, new filter)
the drain fitting will, as far as i know it is for the gt series turbos
Brand New MSP/MP3 end links
Brand New Mazdaspeed Lightweight Flywheel
Brand New Spec Stage 2 clutch, Part Number #SZ942
MSP ECU
MSP Headunit(did ribbon fix)
MSP exhaust mani
MSP Turbo
Brand New HKS SSQV
MSP s Pipe(used, 60k miles, no cracks, needs new studs)
Dual stage boost controller w/ aacuboost manual controller(used)
Ground Control Coilover Sleeves
Ebay SRI with K&N Filter
Jet-Hot Coated OBX Header
MAM Cat-less midpipe
MSP Mani Heat Shield
Forcefed Center Bezel Gaugepod w/ oil pressure and bosst gauges(cracked)
-10AN Braided line
the brass block is supposed to fit on the back of the block (oil feed)
the last one is a male 1/8" to female -4AN fitting

[TWISFM]

and sub

[LASERBLUE135]

Sub

[githua92]

Is the Injen CAI still available?

[Keno1542]

Is the Injen CAI still available?

yes...lmk when ready to buy and i will send paypal addy

[githua92]

It has everything I need to install it right?

[Keno1542]

It has everything I need to install it right?

yes it does, and all pms have been replied to

[Keno1542]

bump for msp ecu

[imola.zhp]

Will those endlinks fit a P5? If so, would you consider separating the rear from the front?

I only need the rear's as I f'ed mine up when I lowered the car...

If you would consider that, would you please PM me a SHIPPED price to an address in the 38018 zip code? Paid with paypal.

Thanks!

[XxaltezzaxX]

the radio works fine? with the fix will it break again?

[special--k]

i hate when you guys write "Only to the US"

[JDM-P5]

LOL...bump for a good seller.
GACC!

[Keno1542]

Will those endlinks fit a P5? If so, would you consider separating the rear from the front?

I only need the rear's as I f'ed mine up when I lowered the car...

If you would consider that, would you please PM me a SHIPPED price to an address in the 38018 zip code? Paid with paypal.

Thanks!

dont think they work with the p5 and reg proteges


the radio works fine? with the fix will it break again?

it works fine, and it should not break again, did my best to protect the wire when i fixed it

[Keno1542]

to the top

[BlkWidow]

will those oil fitting hook up to a gt28rs?

[ForceFed]

Show me the back side of that flywheel please.

[Keno1542]

will those oil fitting hook up to a gt28rs?
the drain fitting will, as far as i know it is for the gt series turbos, and the brass block is supposed to fit on the back of the block (oil feed), and the lst one is a male 1/8" to female -4AN fitting

Show me the back side of that flywheel please.
i will try to get the pics for you tomorrow, but it is brand new, i havent even seen the back of it yet lol

[ForceFed]

Well the package is CLear..I just want to see the back....I am curious of something.
Thanks

[BlkWidow]

what r the other fitting for? pm sent

[TheDirtyGoatee]

If I wasn't broke as hell Keno, I'd scoop up pretty much everything you got for sale. Why? Because I could really use it all. Esp. the MSP headunit. Mine has now gone almost completely blacked out. The only lights that work are the main display and the little blue circle around the volume knob. Sucks when I hit "random" and not "att" while playing a CD. I have to mute it braille style by feeling.

The ribbon fix seems to do the trick well from my firsthand experience.

[Keno1542]

If I wasn't broke as hell Keno, I'd scoop up pretty much everything you got for sale. Why? Because I could really use it all. Esp. the MSP headunit. Mine has now gone almost completely blacked out. The only lights that work are the main display and the little blue circle around the volume knob. Sucks when I hit "random" and not "att" while playing a CD. I have to mute it braille style by feeling.

The ribbon fix seems to do the trick well from my firsthand experience.

well i could amke you a deal on the headunit, also i dont know if you are interested in the ground controls i put on my car, but those will also be for sale shortly

[_MSprotegy]

in for clutch and flywheel
letme check the funds

[TheDirtyGoatee]

Dude... let me know on those GC's. I don't have a lot of funds right now but when you decide, things might have changed. Keep me in the loop.

[msp03.5]

pm sent

[Keno1542]

replied

[nativebackup1]

head unit sold?

[Keno1542]

head unit sold?

nope, still up for sale

[Keno1542]

bump

[ForceFed]

I still want to see the back of that Flywheel.
Take the pic mang.

[Keno1542]

I still want to see the back of that Flywheel.
Take the pic mang.

i am working on it, last week was just super busy for me

[Keno1542]

bump

[Keno1542]

I still want to see the back of that Flywheel.
Take the pic mang.

did not forget about this, this will have to be after the new years now

[Keno1542]

bump

[Keno1542]

bump

[BlkWidow]

i got my oil fitting on weds, thanks bump 4 U

[ForceFed]

OK.........I guess I will just bump your stuff.

[Keno1542]

bump

[ForceFed]

Pic....WTH man....How hard is it really to snap another pic.

Free bumpage though.

[Keno1542]

damn it, i knew i was forgetting something before leaving my house...ill get it when i go home this weekend...damn it

[ForceFed]

Its all good..I need a comparison pic.

[Keno1542]

bump

[i12drivemyMP5]

Wondering if msp headunit still available & another important question, how hard would it be to hook this up in my P5 wiring wise. Just splice on my adapter that comes with the single DIN radio kit?

[Keno1542]

it is still available(its really a good deal for a fully working head unit), and it would just be a splice job to get it into your p5

[Keno1542]

bump

[Keno1542]

send me offers

[Keno1542]

bump for offers

[goodfornothing]

Bump for you Keno.

I was going to buy his turbo setup and he offered me a great deal. Get on it guys!

[mp3-79bronco]

5 bucks for the ecu? ......if not free bump lol....if i had money right now id buy it....but i dont lol

[Keno1542]

bump for offers

[Keno1542]

throw me some offers

[TheDirtyGoatee]

Bad time to sell shit. Economy's down (I know, cliche) and unemployment is rising (not horribly, just rising). My bro just got laid off as a perfect example. Shit happens bro. If I get some cash I'll def. be buying some shit I promise you that.

Anyhow...

To The TOP!

Free bump. :D

[cplagge]

sub

[mp5123]

pm sent pypl pymt sent awaiting brand new flywheel ty

[Keno1542]

bump for clutch and flywheel sold

[ForceFed]

And Still didnt get a pic of it...Thanks

[Keno1542]

shooot...forgot that when i went back home...im sorry man...really

[Keno1542]

bump for offers

[mp5123]

sorry man didnt know you had dibs i just took him up on his offer when i had that flywheel thread open

[Metallic36]

I don't think he had dibs, he just wanted a photo of the back of it I believe.


sorry man didnt know you had dibs i just took him up on his offer when i had that flywheel thread open

[Keno1542]

I don't think he had dibs, he just wanted a photo of the back of it I believe.

correct, he was not interested as far as i know in purchasing it

[cougar10agREDUX]

already discussing the MSP ECU

[mp5123]

alright cool....he was just trying to get a pic of the back so people could see condition of it now i get it. hopefully all the things i ordered com in nxt week so i can start driving the wagon again insted of my wifes cobalt lol

[Keno1542]

msp ecu sold bump

[Keno1542]

saturday bump

[Keno1542]

sunday bump

[Keno1542]

bump

[Keno1542]

bump

[Keno1542]

headunit sold bump

[Keno1542]

turbo and mani sold

[Keno1542]

bump

[Keno1542]

bump

[Keno1542]

bump for offers

[Keno1542]

throw me some offers ppl

[Keno1542]

anybody got offers?

[big Lou]

just recieved my clutch, bump for a good seller!!

[Keno1542]

just recieved my clutch, bump for a good seller!!

good deal!

bump

[Keno1542]

bump for offers

[Keno1542]

price drop bump

[Keno1542]

bump

[Keno1542]

bump

[new2tuning]

hks ssqv still available?

[Keno1542]

yes it is, ready to ship, pm for paypal addy if you are interested

[TheDirtyGoatee]

Jesus Keno, you are on this thread like a hawk. LoL GL with the rest of the sales.

[Keno1542]

Jesus Keno, you are on this thread like a hawk. LoL GL with the rest of the sales.

ya, i just wanna get this stuff outta here...you still interested in the ground controls? I should be takin them off this weekend...lmk

[TheDirtyGoatee]

Shit man I am probably just as broke, if not more broke than you. Just out of curiousity, how much you sellin em for?

[Keno1542]

probably ~200

[TheDirtyGoatee]

Dude, if I get it, I'd buy em. There's a shit-ton of other stuff I'd like to buy but thats a good one. How did the ride feel since you had illumina's too?

[Keno1542]

it handled way better than it did stock, but the ride was also that much harsher...i would have kept them if i was still modifying my car, but its just not worth as much without the other stuff on my car as well

[Keno1542]

bump

[Keno1542]

bump

[Keno1542]

bump for new items

[Keno1542]

Bump for yesterdays update

[darocket]

i will snach both the K&N short ram intake and hte headers but I need you to come down on the headers. I just checked ebay and that how much for a pair new OBX headers. So let paly the "price" can i get the headers for 140? hit me back and one more thing... you how much to ship them to florida.

[Keno1542]

the header on ebay is not jet-hot coated...i think that i have a fair price for the header...i will probably be able to make a deal if you buy both though...pm if you are still interested

[darocket]

I do want both.. im not a fan of chrome so im really digging the grey... anywho.. i need both i got my engine and it is and it very UGLYYYY with the stock air filter and stock exhaust manifold. so meet me half way and give me a price for both. Do you live in Georgia? If so are you near Six Flags? Im going up there next week.

[Keno1542]

ya, i live in downtown and will be at sixflags on sunday for an autocross...i can meet up with you then if you would like...i will think of a price and pm you tomorrow

[darocket]

that is f-ing awesome. well im going up there for a mini vacation on Monday the 16th to Wed. the 18. i guess all i need from you is a price my friend. I towuld be longer but i gotta bartend a wedding... anywho... hit me back as soon as you can.

[MSP_03_FL]

Hey interested in the HKS BOV. Im in on it.

PMED.

[01bluemp3]

would you ship the mam midpipe?

[Keno1542]

would you ship the mam midpipe?

ya, at your cost of course

[FLAMSP]

mam mid work on msp?

[Keno1542]

mam mid work on msp?

yes it will...even has bung for the second O2 sensor on it

[Keno1542]

HKS BOV Sold

[KZL_99ES]

is that 3" for the midpipe?

[Keno1542]

i believe it is the 2.5" one...stainless steel for sure

[KZL_99ES]

mmm....interested, but...

how much for shipping to my-








<<< location?<location?></location?>

[Keno1542]

pm me an offer for it and we can talk about it

[Keno1542]

bump

[SpcyOrngMSP]

pmd

[Keno1542]

spipe and boost controller sold

[MSP_03_FL]

That header fits what car?

[Keno1542]

anything with an NA 2.0L FSDE

[KZL_99ES]

it fits my 1.8 too

[Keno1542]

it fits my 1.8 too

really, i did not know it fit the 1.8 as well...you still interested in the items you mentioned above

[KZL_99ES]

maybe..., PG might make one for me, not sure yet...

question tho: is the flex pipe end the end connecting to the dp?

[Keno1542]

maybe..., PG might make one for me, not sure yet...

question tho: is the flex pipe end the end connecting to the dp?

yes it is on the end that connects with the down pipe...lmk what you wanna do

[KZL_99ES]

i'll pm you when i know! thanks!

[Keno1542]

bump for another update

[Keno1542]

bump

[Keno1542]

ground control sleeves sold

[Keno1542]

bump...open to offers

[Keno1542]

open to offers

[Keno1542]

bump

[MSP_03_FL]

Bump

Great Seller. Thanks again.

[SpcyOrngMSP]

items received! thanks!

[fishdonotbounce]

May be interested in that catless midpipe. Will PM you later today since I really need to get to bed lol.

[Keno1542]

items received! thanks!
good to hear

May be interested in that catless midpipe. Will PM you later today since I really need to get to bed lol.
looking forward to hearing from you

[Keno1542]

header, intake , and midpipe sold bump

[fishdonotbounce]

Doing the sexy new midpipe dance. (ughdance)

[Keno1542]

bump

[Keno1542]

throw me some offers

[Keno1542]

MSP mani heat shield sold

[Keno1542]

bump

[Keno1542]

im ready to see this stuff go...all offers considered

[Keno1542]

to the top

[Keno1542]

all offers considered

[Keno1542]

bump for some offers

[Keno1542]

no offers??? all offers still considered

[JayDubb]

Got the headers and intake last night! Thank you kind sir!

[Keno1542]

Got the headers and intake last night! Thank you kind sir!

cool...hope you like them as much as i did

[Keno1542]

need to move this stuff...all offers considered

[Keno1542]

bump

[Keno1542]

bump

[Keno1542]

bump

[Keno1542]

bump for a coupla hours left

[Keno1542]

bump

[Keno1542]

bump

[Keno1542]

daily bump

[Keno1542]

daily bump

[Keno1542]

bump

[Keno1542]

to the top

[Keno1542]

bump

[Keno1542]

pod and gauges sold

[DubbyDoo]

How much for the oil fittings and braided line shipped to 23831 ?

[Keno1542]

make me an offer

[Keno1542]

oil line and fittings sold

[Keno1542]

bump

[Keno1542]

bump

[Keno1542]

bump..about to move and i dont wanna take this with me

[Keno1542]

bump...any reasonable offer will be taken