msp question

[msp 2212]

i got the injen cai and i wanna put it to a sri how do i do i put that temp sensor inline??

[BOOSTR]

Drill a hole in the bottom of the filter and put it in or buy an AEM filter that already has one in it.

[JasonBourne]

is this the better solution? drill a hole in the filter.

[mx-p5]

just leave teh temp sensor below the tubing. It doesn't HAVE to be in the filter, but, gives a slightly more accurate reading if it is

Or, if you're gonna keep it run as a SRI, drill a hole in the intake piping and get a rubber grommet off the first tube and insert it, then put the temp sensor in there

[MSP2024]

there is a hole in the frame right under the intake, take the lil rubber thing off the cai put in the hole on the frame and put the sensor right there problem solved

[Kypatrick]

Get a 7/8" Hole saw and drill a hole in the Intake Tubing.

[SeR_Cyclops]

i drilled mine on a drill press and then shoved it in the hole.
http://i47.photobucket.com/albums/f196/ser_cyclops/Picture002.jpg
http://i47.photobucket.com/albums/f196/ser_cyclops/Picture001-1.jpg