Prosport gauges

[shanecarew55]

Ive recently purchased 3 prosport gauges all electronic, Boost, A/F mis, and oil pressure. i was wondering if anyone had installed these gauges and could offer some hints on where to tap into the pressure sender for the oil pressure gauge. the threads are different between the car and the pressure sender from what i understand. if anyone has hooked these up and could point me in the right direction it would be great

[bova80]

for oil pressure you'll probably need to get the pressure sender plate to install on the filter housing.

[tunersteve]

for oil pressure you'll probably need to get the pressure sender plate to install on the filter housing.

You'll also need the spin-on conversion if I remember correctly, no?

[shanecarew55]

is there any way of hooking it up without getting those conversion parts using the stock pressure sender swith

[Igve2shtz]

Ya, tap off of the stock oil pressure sensor. Take out the stock oil pressure sensor, add a bit of tubing (1/4" NPT i believe), then add a Tee, and add the stock sensor, and the prosport sensor ....

Edit: http://www.mazdas247.com/forum/showthread.php?t=123667844&highlight=oil+pressure+gauge+install Read post #4

[shanecarew55]

thanks for the info although im regretting gettin the oil pressure gague now because that looks like a serious pain in the ass. the help was much appreciated.

[Dparks7]

does anyone know of a how to for the oil pressure gauge?