MIL Eliminator Question

[bradboyd80]

Ok, so I finally got the car back on the road with the new sls midpipe. I've got the non-fouler on there and its all ready to be hooked back up, but the O2 sensor wiring won't reach so I can plug it back in. I've done a ton of searching and can't find exactly what I'm looking for. I really don't want to cut into the wiring, so I'm looking for the O2 sensor extension. Do they make an actual male/female "extension cord" to use? And where can I find it? Or will I be forced to splice/solder into the wiring? I'm getting mixed results via a search, but no solid leads. Maybe I'm not searching the right key words or something because I can't even get the right results on google.

[BOOSTR]

Strange that the location of the bung in that pipe is too far for the stock wiring, but just go to an exhaust shop and have a new bung put it where you need and weld the other one shut. Problem solved.

[bradboyd80]

Wow, I can't believe I didn't think of that. Well I bought the pipe used, and that's where the bung and anti-fouler were already placed. The wiring harness came up about a foot short. I've seen discussion about a simple harness extension, but can't find the part anywhere. Thanks!
By the way, where in FL are you from?

[BOOSTR]

Your welcome. Just north of you in Sumter county. I've seen extenders for other cars but I'd just let the welder solve the issue. There are a few places in Tampa that can do it cheaply for you. You might want to pick up the bung before you go to one.

[bradboyd80]

Sweet. Thanks man!