What is this Exhaust?

[c7scayman]

What is this exhaust on this MSP?
I cannot find it anywhere.
I am buying this MSP and I hate the looks of the exhaust, but I want to know if it is at least from a good brand that makes some power.
This is the best picture I can find.

http://www.flickr.com/photos/24069531@N04/3004461522/

[mhrebin]

it is probably the slant cut tip welded onto a pipe. never came across an aftermarket exhaust with that tip.
i heard the racing beat, greddy and vibrant are good exhausts for the MSP.
do a little search and you will find tons of results

[808MP5]

well only seeing the tip doesn't actually help cuz you can weld on practically any style tip you wanted to any exhaust...

[zuku26]

could be almost anything. From how far is sticks out it could just be an ugly pepboys tip

[zuku26]

it is probably the slant cut tip welded onto a pipe. never came across an aftermarket exhaust with that tip.
i heard the racing beat, greddy and vibrant are good exhausts for the MSP.
do a little search and you will find tons of results

racing beat is stock

[mhrebin]

racing beat is stock


oh i was thinking of the racing beat they sell on protegegarage. is that only for NA protege's?

[Ricktalife]

yea a dual tip does not look good on the msp lol

[low_psi]

Its just a "DTM Style" muffler someone used.

[c7scayman]

I thought it just might be a tip because I couldn't find it anywhere on protegegarage and corksport and mazdaspeedparts.com

I got to take that off. Very ugly.
I plan to get the Vibrant Turbo-back exhaust after I finish paying off the car in a year.
I emailed Vibrant and they said it adds around 5 HP and 20 lb-ft of torque.
And it is a direct bolt on. Great deal.

[xDJ DUBx]

oh i was thinking of the racing beat they sell on protegegarage. is that only for NA protege's?

MSP comes with a racing beat exhaust but racing beat also makes a cat-back, which will fit on NA and turbo setups, it also isn't the same as the stock racing beat.

[NCZ13]

The muffler that comes on the MSP is a racing beat muffler.
not a full exhaust system.

[K. Soze]

Prolly some generic muffler. IMO, that looks god awful.

[low_psi]

I thought it just might be a tip because I couldn't find it anywhere on protegegarage and corksport and mazdaspeedparts.com

If it is a stock Mazdaspeed/Bosal muffler that they just cut and welded the nasty tip onto, you gotta change it ASAP. A year is too long! :)

[xDJ DUBx]

+1

Very very VERY ugly

If all else fails, just buy a decent looking ebay muffler for 20 to 40 bucks, cut then weld and wa-la

[dstmsp03]

cheap muffler that can be welded on the pipe, had one put on my Jetta when i had it.. but did it right without haning out 8 inches.. sounds nice.. ill admit

[xDJ DUBx]

My Exhaust cost me 100 bucks, flat

Ebay Cf Muffler - 40 shipped
Resonator delete - 20
Muffler shop install - 40

End result...
http://i10.photobucket.com/albums/a104/x23DUB23x/DC102460010.jpg
http://i10.photobucket.com/albums/a104/x23DUB23x/th_DC102462013.jpg (http://s10.photobucket.com/albums/a104/x23DUB23x/?action=view&current=DC102462013.flv)

[StealthWyvern]

^subbin to hear that when i get home.

[xDJ DUBx]

haha, don't tell me you're at work.

[StealthWyvern]

haha, don't tell me you're at work.

ok im not... im just at a building were i pretend to work... lol

[mhrebin]

sounds real good. not to shabby

[xDJ DUBx]

lol. I have a bad habbit of visiting mazdas247.com while I play that game too.

[xDJ DUBx]

sounds real good. not to shabby

Thank you, can't go wrong for the price. :D

[sandspeed]

ugh...DMT style exhaust looks weird to me.

[zuku26]

so deleting the resonator will give more tone? I already got rid of the cat. I'm running the stock cat back. But it could use a lil more tone

[xDJ DUBx]

Whoa sand, you got rid of your lip?

[xDJ DUBx]

The res is like a muffler from what I know.

[Ricktalife]

so all you have is the muffler? no 3 inch piping or anything?

[xDJ DUBx]

Yeah, all I got was exactly what I mentioned

Stock headers, stock mid-pipe, stock piping, both cats.