FS: OEM MS3 springs+ s2k 32mm FSB

[specvspeedfreak]

http://c3.ac-images.myspacecdn.com/images02/48/l_a22b641d964a413fa973b92fdf09c992.jpg
anyone is looking for a OEM MS3 springs? These are higher spring rates (188F and 171R) and would lower the MZ3. They linear springs which are preferred for better feel and keeping the rates the same throughout spring compression. I live in Norfolk,VA and prefer pickup but im willing to ship. Just let me your zipcode. $60 for the set of springs... The sway bar is 33mm cusco front sway bar for s2000. sell for $100 (for those who have an s2000)

[ghostbusters]

will these springs work in the stock 2007 mazda 3 sedan?, im interested, zip code is 33172, how long were they installed on the car? and i read somewhere that these will actually raise the front of the sedan,,,anybody know how true this is?

[specvspeedfreak]

these springs should work but you will need to confirm that... from what i understand, all Mazda 3 suspension are interchangeable... 25 is shipping to 33172
( i will need to double check that though)

[mazda32008]

i had the mazdaspeed3 OEM springs on my car. The ride i got from them was excellent. I loved them. As for raising. I think the front of my car stayed the same and if it did raise maybe by like 2-3mm. The back looked half inch lower than usual though and with a full tank you can see that. I sold my springs for 120....$60 for those springs is a steal.

[junya1985]

What year s2k or will it work for all models?

[specvspeedfreak]

What year s2k or will it work for all models?

yes the will work all years ap1 or ap2 models... they did a great job. The snap overstop I used to get went away.. you wont find them for cheaper than 250-300 for this was which is the thickest bar you can get.

[specvspeedfreak]

if you are going to use paypal .. you have to pay the 3% fee. Paypal is preferred though as its the fastest way to get the product to be shipped to you. non the less both are a great deal!

[SubieKiller3]

if i had a mz3 i would rather just pay like 40 dollars more and get some good aftermarket springs that will actually lower the car and make a difference. those stock springs wont do any better for a mz3.

[specvspeedfreak]

if i had a mz3 i would rather just pay like 40 dollars more and get some good aftermarket springs that will actually lower the car and make a difference. those stock springs wont do any better for a mz3.

which springs can you buy for $100...nopi was selling them for that cheap but they stopped... they are stiffer but wont blow the oem shocks so soon like aftermarket springs...please don't discourage people from buying- thats not cool. if you have a link to a place that sells springs for that cheap make your own thread to inform people. thanks

[ghostbusters]

thanks, will let you know about the springs before the week is up and if their still available

[CulRidr]

if i had a mz3 i would rather just pay like 40 dollars more and get some good aftermarket springs that will actually lower the car and make a difference. those stock springs wont do any better for a mz3.

Some people don't care to actually lower their car and are happy to keep the stock look AND get a nice cheap performance mod...this is especially true of areas that get a lot of snow, assuming they drive their car in the winter.

[ghostbusters]

^^^ what he said, i dont want a drop, the protege is dropped and that makes it difficult to drive. I dont need that on both cars, just looking for the performance aspect of this mod, anybody know the stock spring rates of the mazda 3?

[mazda32008]

STOCK MAZDASPEED 3 SPRINGS
DROP: 0.5" around
SPRING RATE: Front: 188.298 lb/in , Rear: 171.180 lb/in

couldn't find the stock mz3 spring rates......

[boosthead]

Bump for a great seller. I had speed3 springs on my 06 3 and my car was lowered .5" front and rear.

[specvspeedfreak]

Bump for a great seller. I had speed3 springs on my 06 3 and my car was lowered .5" front and rear.

how are the rims/tire? you liking them?....

[specvspeedfreak]

bump