FS:J&S,JDM Cam,Uni

[BoOsTiN]

J&S Knock sensor: Brand new. This is the Protege specific model so no worries about being compatable.
$445 (thumb)(wow)






Steering wheel gauge pod:
This is the original pod made for the protege by i forget the company name.
Somehow it was damaged while it had it stored. Not sure what this is worth to anyone.
Best offer + shipping

[BoOsTiN]

More pics...

[neox.286]

seem and rode in the car with that unichip...it pulls great and is way better than the stock unichip tune, but is still tailored to the mods he said above

still a good unit (thumb)

bump!
*dibs on cam*

[SwirlFX]

That unichip should sell quick. I just bought one yesterday of this forum. 400 is less than what I paid.

[LASERBLUE135]

great deal on the unichip, if I could have done it again, I'd have bought a tuned unichip (like the one for sale here). I paid what this one is offered at.

[neox.286]

oh and the switches on his unichip are the upgraded ones that don't have issues too ;-)

[mikeski]

i have hardpipes, customSMIC, Injen CAI, HKS BOV, and 3" vibrant exhaust. Im reading that the unichip causes problems when your msp is not stock. what problems did u have with it? why are you selling?

[satyr36]

i have hardpipes, customSMIC, Injen CAI, HKS BOV, and 3" vibrant exhaust. Im reading that the unichip causes problems when your msp is not stock. what problems did u have with it? why are you selling?

it wont cause problems with thos mods. you just have to get it tuned (most likely)

it has problems with moving the MAF sensor i know that much

[Buyer]

it wont cause problems with thos mods. you just have to get it tuned (most likely)

it has problems with moving the MAF sensor i know that much

Fraid not....I ran my unichip with the MAF relocated with a JDM sam tune, then had it re-tuned on a dyno with the MAF relocated. It made absolutely no difference that the MAF was relocated.

[BoOsTiN]

i have hardpipes, customSMIC, Injen CAI, HKS BOV, and 3" vibrant exhaust. Im reading that the unichip causes problems when your msp is not stock. what problems did u have with it? why are you selling?

I had no problems with the Uni. Im running the FTC right now so I no longer need the unichip.


Thanks for the kind words folks!

[kamon8404]

Damn, I wish I had the funds right now to get the j&s. I have been wanting one for a long time. I'm just recovering from last months spending spree.

[jammypwnzor]

bought that unichip hehe

[BoOsTiN]

No one needs a J&S?

[kamon8404]

No one needs a J&S?

I do! I just dont have the funds right now! I'm thinking of selling some stuff off to get the funding for it though.

[BoOsTiN]

Cool man. Your the only interested so far. Let me know.
Thanks,

[jammypwnzor]

Boostin you have a couple PMs from me.

[BoOsTiN]

(bump)

[BoOsTiN]

Price drop on J&S

[Protege5 Driver]

what is so special about the knock sensor?

[MsP155]

I had no problems with the Uni. Im running the FTC right now so I no longer need the unichip.


Thanks for the kind words folks!

bought from me!!! btw how you like the FTC?

[BoOsTiN]

what is so special about the knock sensor?
(copied/pasted from another post)

Knock retard can be set to max out at 10 or 20 degrees. If the unit detects knock it will pull timing. At the 10 degree setting it will pull timing in 1 degree increments. At the 20 degree setting, it will pull in 2 degree increments.

You can choose to retard all cylinders equally, or individually. Thus if you have knock on cylinder #4 and only on #4, you can retard the timing on that cylinder, while leaving the other 3 at full power (timing). Very cool.

You can set retard based upon boost. You get a dial that allows you to set a value ANYWHERE between 0 and 10 psi. This is when the unit will begin to pull timing. How much timing you ask?

Well, with another dial, you can set how much timing it pulls per psi of boost. In this case, a similar dial allows you to select between 0 and 2 degrees of retard. So, if you want 1/2 degree per psi, turn it a quarter of the way. Want more, turn it more. What 7/10th degree per psi, turn it 35%. You get the idea.

[BoOsTiN]

bought from me!!! btw how you like the FTC?

Whats up man!
Im loving it. working great. Still need to get some dyno tuning done but so far so good.
How you enjoying the Wii?

[neox.286]

(copied/pasted from another post)

Knock retard can be set to max out at 10 or 20 degrees. If the unit detects knock it will pull timing. At the 10 degree setting it will pull timing in 1 degree increments. At the 20 degree setting, it will pull in 2 degree increments.

You can choose to retard all cylinders equally, or individually. Thus if you have knock on cylinder #4 and only on #4, you can retard the timing on that cylinder, while leaving the other 3 at full power (timing). Very cool.

You can set retard based upon boost. You get a dial that allows you to set a value ANYWHERE between 0 and 10 psi. This is when the unit will begin to pull timing. How much timing you ask?

Well, with another dial, you can set how much timing it pulls per psi of boost. In this case, a similar dial allows you to select between 0 and 2 degrees of retard. So, if you want 1/2 degree per psi, turn it a quarter of the way. Want more, turn it more. What 7/10th degree per psi, turn it 35%. You get the idea.

man, I'd take the J&S in a heartbeat if I had the cash haha
maybe next month if its still up for sale (which I doubt lol)

[zoomzoom510]

man, I'd take the J&S in a heartbeat if I had the cash haha
maybe next month if its still up for sale (which I doubt lol)


i thought you already have that setup? didnt you buuy some kinda knock sensor light thingy majiG?

[neox.286]

I have a turboXS knock sensor light that lets me know when theres an engine knock through the use of the oem knock sensor, but it does not adjust timing accordingly or have NEARLY the amount of features of this lol

I got that light from either pg or crossover (can't remember now) after they had informed me that they did not have a engine gasket set in stock, so I just picked something else out and they sent it my way

[zoomzoom510]

I have a turboXS knock sensor light that lets me know when theres an engine knock through the use of the oem knock sensor, but it does not adjust timing accordingly or have NEARLY the amount of features of this lol

I got that light from either pg or crossover (can't remember now) after they had informed me that they did not have a engine gasket set in stock, so I just picked something else out and they sent it my way

oic

[BoOsTiN]

man, I'd take the J&S in a heartbeat if I had the cash haha
maybe next month if its still up for sale (which I doubt lol)

At this rate its possible!

[MsP155]

Whats up man!
Im loving it. working great. Still need to get some dyno tuning done but so far so good.
How you enjoying the Wii?

hahaha in the begining i was loving it...but now i just totally miss my EMS...we didnt call no tradebacks right? so im calling it now!! tradebacks!!!!...lol jk glad you enjoy it

[neox.286]

andy, you sold him the ftc?

lol

[BoOsTiN]

hahaha in the begining i was loving it...but now i just totally miss my EMS...we didnt call no tradebacks right? so im calling it now!! tradebacks!!!!...lol jk glad you enjoy it

Haha no way man! You'll have to pry it from my kung fu grip!

[BoOsTiN]

andy, you sold him the ftc?

lol

Err...say what??

[NCZ13]

where in cali are you?

will you be going to sevenstock on the 27th?

Im interested in the gauge pod. do you have any more pictures showing the damage?

[neox.286]

Err...say what??

lol, andy = msp155

[BoOsTiN]

Im in Stockton. Sorry, probably will not be going to sevenstock. Pm your email and i'll send some more.


where in cali are you?

will you be going to sevenstock on the 27th?

Im interested in the gauge pod. do you have any more pictures showing the damage?

[BoOsTiN]

Weekend blowout sale!!

[haze20]

I really want that J&S. But I need my new job first.

[MsP155]

ya i did...i kinda miss it...o ill pry it alright ill just judo chop your kung fu grip!!!!

[BoOsTiN]

ya i did...i kinda miss it...o ill pry it alright ill just judo chop your kung fu grip!!!!

LOL!


Bump it up.... Still available!

[BoOsTiN]

Bump again for a 24hr sale price!

[BoOsTiN]

back up

[BoOsTiN]

btt

[BoOsTiN]

Still here...

[Speed3.5]

didn't i offered you something about J&S ??

check pm if not and pm me back if you can.