trz motor mount poly or derlin?

[intak3_bLkMs3]

ok so ive definetly decided to go with the trz mount as my next upgrade and was pretty set on the poly. but i recently read a thread and alot seemed to have the derlin and were ok with it. im ok with some vibes with the ac on ect... but i dont want it to be extremely bad do u think poly will be my best bet or will derlin still be ok

[intak3_bLkMs3]

bump help please

[udontknowjack]

depend on how much u can handle vibration...derlin will cost alot of vibrantion...

[arkenzo]

Is there a substantial difference between the two material as far as engine rocking and wheel hop?

[AutoXRacer]

I chose the poly and my engine/tranny barely move...
See my thread: http://www.mazdas247.com/forum/showthread.php?t=123689465

[CWPspeed3]

I went with the poly as well, there are increased vibrations, mostly noticeable at idle or with the ac on. It's plenty stiff enough for use as a daily driver and occasional track events. I dont have experience with the derlin but I dont think it would be necessary if your not planning to use it mostly at the track or high hp numbers.

[intak3_bLkMs3]

sweet thanks u guys