pictures of nos kit

[bigdawg181]

135066

135067

135068

135069

just so everyone knows i have it on my car... and it is working and yes i also know that no one care (Demi)
please let this be the end of this please......

[DeanSweet]

I had zex in my '92 civic cx! :)

[Bonafide_Spd3]

That's pretty nuts... It's awesome

[SharkDiver]

How do you have it setup?It goes off when you go wot?I had the ZEX kit for my RX8 but I never got around to installing it.

[ForceFed]

NAWS....LOL.

What kind of shot are you running with that setup?

[UHATEIT]

You should update the title of the thread, thats now NOS thats a Zex kit, so the term would be "pictures of my nitrous kit"

[ForceFed]

You should update the title of the thread, thats now NOS thats a Zex kit, so the term would be "pictures of my nitrous kit"
Technically..It is still a "NOS" kit.
Nitrous Oxide is commonly Reffered to as NOS for an Abbreviation....No where does it specify that is a "NOS" Branded kit.

And I am just flingin poo at ya...NaWS RoCKs!

[UHATEIT]

Technically..It is still a "NOS" kit.
Nitrous Oxide is commonly Reffered to as NOS for an Abbreviation....No where does it specify that is a "NOS" Branded kit.

And I am just flingin poo at ya...NaWS RoCKs!

His title says "nos kit" But NOS is Nitrous Oxide Systems the company, this is a ZEX kit, yeah its all the same stuff pretty much, but when people refer to all types of nitrous as "nos" it makes me think of those fast and the furious days. I had a Nitrous Xpress kit back in my car in 2003, shit did wonders on my 4-banger

[phillyb]

nos is like xerox?

a fucking brand name?

[SharkDiver]

nos is like xerox?

a fucking brand name?

Or like Bobcat,They are really called skid steers.

But we all know what he is talking about so who really cares what the title says...

[bigdawg181]

i have a 65hp jets for the street and 100hp jets for the track

[sl0wthe0ry]

is it setup for WOT?

[bigdawg181]

yep.i also have a rpm window switch for when i miss a gear

[allmotor95pgt]

very nice setup. nicer than my set up. but then again i only put it in temporarily so it didnt have to be nice. how u like that 100 shot? have u tried it yet?

[Babyface13]

Verry nice. You got any videos? That would be cool to see.

[Darksun280]

have fun I made 361 380 with a little help from the bottle.

[allmotor95pgt]

have fun I made 361 380 with a little help from the bottle.


sounds about right.
what shot were u on?what were u making off the botle? im guessing a 60-70 shot.

[shucky]

I've edited my post for the time being until I clarify something. Excuse my ignorance, but where exactly is the nozzle plumbed into here? Are you plumbed into the hot side of the intercooler? I cant make out the pic you have posted of the nozzle. If you do, thats fine. In this application it is used moreso for cooling. It will not yield the same gains plumbed like this as a typical nitrous installation. Furthermore, do you have a microswitch under the pedal or do the Zex kits wire in and sense WOT from system sensors? If its wired in to system sensors I would bet the flow is turning on and off continuously because #1, the throttle plate dances around, #2, the throttle plate doesn't open fully.

[Babyface13]

All good questions. I still wanna see a video lol

[UHATEIT]

Or like Bobcat,They are really called skid steers.

But we all know what he is talking about so who really cares what the title says...

sharkdiver's knows everything, very helpful guy!

[DeanSweet]

funny... 40 years old and I always referred to them as 'bobcats'... that is until I talked to a co-worker and her husband does concrete and she stated they own a couple 'skid steers'.. I finally asked what that was thinking it was some special piece of equipment for concrete? Duh... its the same dag gone thing. Is this a regional thing?

[Darksun280]

sounds about right.
what shot were u on?what were u making off the botle? im guessing a 60-70 shot.

lol nah I just sprayed it on my inter cooler 303 343 with out it.

[sl0wthe0ry]

yep.i also have a rpm window switch for when i miss a gear

hows your launch setup? do you not spray at launch?

[wolverine_man]

Ja Rule says, "He's got enough NOS in there to blow him SELF up, PERIOD!"

(rofl2)

[SPEED3TYPE2]

sub cool!

[UHATEIT]

funny... 40 years old and I always referred to them as 'bobcats'... that is until I talked to a co-worker and her husband does concrete and she stated they own a couple 'skid steers'.. I finally asked what that was thinking it was some special piece of equipment for concrete? Duh... its the same dag gone thing. Is this a regional thing?

regional? Maybe so, I've never heard of a bobcat or skid steer before, whats that?

[trufanatic]

HEY! i dont see two lines on the left side feeding the fogger. IS THAT A FUCKING DRY KIT!!!?

[MAZDA_SPEED]

(headshake

[dkswim]

hot side or cold side of turbo???

[tru-boost]

Yeah that is a dry kit ! How the hell do you run a dry kit on this car. There is no way for the ecu to add the fuel you need since our car does not have a vacuum operated fuel pressure regulator. So basically this thing will lean you out like cazy, unless i am missing something?
By the way i am in the middle of installing my zex kit. I went with the wet kit though. I am waiting on a few other parts to come in, and get my ecu back from getting the fuel cut flash before i get to try it out. Fill me in here, i want more deails. Also i hope you know that no decent track will let you run with your bottle like that.

EDIT.......
with a closer look at the last pic i can see he has the two ports that are supposes to ne use for fuel enrichment just looped together. That means there absolutely no fuel being added with this nitrous. For those who dont know, nitrous doesnt add power, the fuel that goes akong with it does. Without fuel all you have there is a timebomb! there isno chance in hell that car would survive a 100 shot that way. To be honest i wouldnt use more than a 25 shot like that. The only benefit you are getting is the xooling effect of the nitrous, and even that is being ruined by the nozzle placement. Notnonly is it on the HOT side of the IC, its before the turbo !! Wrong all wrong !! This set up will be the demise of this car.

[tru-boost]

I've edited my post for the time being until I clarify something. Excuse my ignorance, but where exactly is the nozzle plumbed into here? Are you plumbed into the hot side of the intercooler? I cant make out the pic you have posted of the nozzle. If you do, thats fine. In this application it is used moreso for cooling. It will not yield the same gains plumbed like this as a typical nitrous installation. Furthermore, do you have a microswitch under the pedal or do the Zex kits wire in and sense WOT from system sensors? If its wired in to system sensors I would bet the flow is turning on and off continuously because #1, the throttle plate dances around, #2, the throttle plate doesn't open fully.
I can answer some of that. Zex uses a tps sensor signal to determine WOT. You are correct that the throttle dances (if you dont have a flash) but that is why you dont wire it into the actual TPS signal wire. Instad you tap into the throttle pedal position sensor. That always gives a true WOT reading and wont cause your nitrous to go crazy.
I still dont understand how to use a dry kit on this car though. You still need to use 2 jets for the zex dry kits. One to control nitrous flow, and the other is used to raise you fuel pressure via a vacuum pressure regulator. This car doeant have that!! How the hell do you jet this thing?

[Mid_Life_Crisis]

Considering how rich these cars are in stock trim, a small, properly calibrated dry shot could work very nicely. Lean the mix just enough, bump up the cylinder pressure because of the extra mass (the other way NO2 kits make power) and the cooling effect reduces knock.
Of course you won't catch me trying it but if one of you wants to report back on the results...

[speed3driver]

Won't the engine blow if the throttle plate shuts at WOT while spraying? Seems to be something this car does a lot for most people.

[tru-boost]

Won't the engine blow if the throttle plate shuts at WOT while spraying? Seems to be something this car does a lot for most people.

You got it. If you fuel/boost cut and the throttle slams shut while spraying you are done. Thats why i sent my ecu to cpe ! No more cut for me, i got throttle control too !

[Mid_Life_Crisis]

Won't the engine blow if the throttle plate shuts at WOT while spraying? Seems to be something this car does a lot for most people.

This would be why you won't catch me trying it.

[speed3driver]

CP-E seems to have this car figured out. If i can't get my car to run the way i want by summer i'll spring the cash for a good cp-e tune.

[tru-boost]

Looks like this "NOS" driver is a no show to his thread.

[MS3MB]

you should really take some vids of it in action

[PCspeed3]

Sketch Mannn

[bigdawg181]

you guys are all full of shit .... you think just because, not one of you can make something like this work than it can not work... wrong wrong wrong.........
all you need to do is know how to tune a turbo
just like all cars you do not buy part and put them on and hope for the best you need to know what you are doing

keep tring maybe you guys will be here oneday
and thinks to the one or two that said good job

[red95_240sx]

Technically..It is still a "NOS" kit.
Nitrous Oxide is commonly Reffered to as NOS for an Abbreviation....No where does it specify that is a "NOS" Branded kit.

And I am just flingin poo at ya...NaWS RoCKs!

NO???NO

nitrous oxide system, maybe but...

edit: u didnt mention system so...

NOS is slang that came from FnF :-/

sorry i just take chemistry, and yes i really hate it.

[bf360]

you guys are all full of shit .... you think just because, not one of you can make something like this work than it can not work... wrong wrong wrong.........
all you need to do is know how to tune a turbo
just like all cars you do not buy part and put them on and hope for the best you need to know what you are doing

keep tring maybe you guys will be here oneday
and thinks to the one or two that said good job

so your still running strong? how many miles? any track or dyno?

[tru-boost]

you guys are all full of shit .... you think just because, not one of you can make something like this work than it can not work... wrong wrong wrong.........
all you need to do is know how to tune a turbo
just like all cars you do not buy part and put them on and hope for the best you need to know what you are doing

keep tring maybe you guys will be here oneday
and thinks to the one or two that said good job

I have owned several nitrous cars, as well as turbo cars, i know all about it bud. I also worked with an engineer at zex to jelp me set up my kit. I also cat tell that your kit is half ass installed. For one its a dry kit with no vacuum source... WRONG ! For two the nozzle is before the turbo.... WRONG ! And for three what you claim to be running is too much for a dry shot. Keep it up and i'll see you in the zoom zoom boom club. You claim to know how to tine for notrous, but have no tuning device..... Hmmmm. Show some proof of this ghetto rigged hack job install actually working and then i'll believe it.

Maybe someday you will be here.... Thats a funny quote since damn near everyone in this thread has more mods than you !

[bigdawg181]

well to start with it's hard to tell what you are saing (your spelling is as bad as your knowleage of ms3's) next i do not have to show you jack.and onemore thing there are alot of guys that have seen my car running at fayetteville drag way. lastey i did not start posting to have pepole like you tell me that i do not know what i'am doing or that it's getto.
and for the last thing if you ever find your self in fayetteville n.c. you can findout for yourself dude

[bigdawg181]

i have about 20,000 miles and going all on the (n2o) some pepole think that there is no help to be had when you hit your turbo with a dry shot of n20.

[tru-boost]

Oops, sorry if i have a typo here and there. I do most of my posing from my ipod touch. Sometimes my fat fingers hit the wrong key. I still want to see proof of this working. A 65 shot would put you at or above 300whp. Thats right where i am with my bolt ons. I have gone 12.8 at the drag strip... Have you ? I didnt think so. So either you are full of shit or a really bad driver..... Possibly both. One of your so called friends should take a video of your awesome nitrous car at the track next time. I have videos and timeslips of all my best runs. Then people know i am not full of it.
Regardless of what i think, i know all about the zex dry systems. And i know that yours is far from being properly installed. And i call a HUGE BS on running a 100 shot. A dry shot that big would kill this car. The MS6 forums are full of stories of guys blowing up with 50HP dry shots.
Believe me i am all for the turbo nitrous combo. Thats why i am doing it. I just like rhings to be done right and for results to be shown. Maybe its just me. I always post dyno graphs showing power gains from mods, as well as track times. Thats what helps the community. Not just some guy that has no usefull information. Just claims.

[bigdawg181]

you said it yourself when you said "it my be just me" your right nobody else is questioning me or my setup dude.whats up with you saing get one of y so-called friends to viedo me so you can see.. dude you are not that inportant to me or anyone else it looks like......
just one question for you have you ever looked at the web site syty.com if so you would see where i got it from (my setup that is)
and just one more time so you can fully understand you do not matter that much to me, what you think about setup
i hope everyone can see how far in left field this dude is, all i was doing was tring to say what is working for
what ever MR.... MS3 .....DAMN IT DUDE.................

[J-Villa]

you said it yourself when you said "it my be just me" your right nobody else is questioning me or my setup dude.whats up with you saing get one of y so-called friends to viedo me so you can see.. dude you are not that inportant to me or anyone else it looks like......
just one question for you have you ever looked at the web site syty.com if so you would see where i got it from (my setup that is)
and just one more time so you can fully understand you do not matter that much to me, what you think about setup
i hope everyone can see how far in left field this dude is, all i was doing was tring to say what is working for
what ever MR.... MS3 .....DAMN IT DUDE.................



I think i've figured out the whole "You can tell when they are Bull shitting on the internet thing".

When guys tell the truth, they usually have multiple pictures and lots of data to back up their truth. They don't argue with people, just present facts.

When people are trying to hide a lie, they dispose some of the facts, but keep everything else secret. when someone wants more, instead of giving them more, then become defensive and argue.


So...... (yupnope)

[klinkb]

you said it yourself when you said "it my be just me" your right nobody else is questioning me or my setup dude.whats up with you saing get one of y so-called friends to viedo me so you can see.. dude you are not that inportant to me or anyone else it looks like......
just one question for you have you ever looked at the web site syty.com if so you would see where i got it from (my setup that is)
and just one more time so you can fully understand you do not matter that much to me, what you think about setup
i hope everyone can see how far in left field this dude is, all i was doing was tring to say what is working for
what ever MR.... MS3 .....DAMN IT DUDE.................