MSP stuff! Turbo, A/C, clutch/flywheel Etc.

[MSP2003.5_Nick]

I Have TONS of shit lying around so I thought I'd try and get rid of some of it.
All prices Negotiable, NO DIBS, first one to send money gets it.
Prices do NOT include shipping.

PayPal = nick.cormier@hotmail.com

Port and Polished stock intake manifold with vtcs removed and blocked = SOLD
T3 Custom Downpipe, made 2.5" off turbo, to 3" Has 3 O2 bungs = SOLD
Stock Turbo with all oil and coolant lines 60,000miles = SOLD
Stock S pipe = SOLD
Stock J pipe = SOLD
Stock MSP turbo manifold EGR Blocked (can be taken off) = SOLD

Next I have a full A/C setup with everything included except the actual electronics. All A/C Freeon lines, A/C Cooling core, A/C Radiator, A/C Charge canistor, A/C Block bracket, A/C Pump, All stock brackets and bolts required to hook it up :D mny of these items are VERY expensive to buy new or get replaced, $450 for everything or part out accordingly.

$450
http://i250.photobucket.com/albums/gg241/msp20035_nick/ACstuff.jpg
http://i250.photobucket.com/albums/gg241/msp20035_nick/ACstuff2.jpg

A/C Fan $55
http://i250.photobucket.com/albums/gg241/msp20035_nick/ACfan.jpg

Stock replacement clutch kit with 12000km on it $110
Stock Flywheel with 35000km on it $85
Stock Cam Gears $110
http://i250.photobucket.com/albums/gg241/msp20035_nick/Clutchflycam.jpg

Pass side axle, thought I needed a new one but didn't, this one is origional on car with 96000kms. No play at all, very stiff and works fine.

$50
http://i250.photobucket.com/albums/gg241/msp20035_nick/passaxle.jpg

Stock lower Grill = SOLD
Stock Air Box = $25
Stock washer resevoir = $27
stock air box to turbo pipe = $20
Eurolite Xenons = $8
Stock front motor mount =SOLD
Stock rear motor mount = SOLD
5mm spacers = $15
http://i250.photobucket.com/albums/gg241/msp20035_nick/sale020.jpg

Aftermarket Fog Light kit MSP with all wiring needed. = $40
http://i250.photobucket.com/albums/gg241/msp20035_nick/sale022.jpg

Aftermarket alarm system with wiring diagram for 3rd gen protege = $60
Carbon Fiber E-Brake cover = SOLD
http://i250.photobucket.com/albums/gg241/msp20035_nick/sale023.jpg

Tokico Blue front Strut with upper strut mount = $70 each
Tein front and Racing beat rear spring combo, tucks tire all around = SOLD
New Tein rear springs = SOLD
3mm Spacers = $15
Stock Bypass Valve = $20
Stock intercooler = $75
http://i250.photobucket.com/albums/gg241/msp20035_nick/strutinter.jpg

3rd gen Strut Tower Brace = $55
http://i250.photobucket.com/albums/gg241/msp20035_nick/sale024.jpg

Trying to remember how your car goes back together = Priceless
http://i250.photobucket.com/albums/gg241/msp20035_nick/sale003.jpg

[kamon8404]

Are you serious only 25 for the springs?

EDIT: If so, I'll take them. I want my front to be just a little lower. I have falken springs.

[MSP2003.5_Nick]

Are you serious only 25 for the springs?

EDIT: If so, I'll take them. I want my front to be just a little lower. I have falken springs.

Yeah, I dont want them at all. I wouldnt match the fronts with other springs though becasue these are not like a 1.5 drop they are more like 3.5 and tuck tire all around.

[kamon8404]

Yeah, I dont want them at all. I wouldnt match the fronts with other springs though becasue these are not like a 1.5 drop they are more like 3.5 and tuck tire all around.

I'll send the funds when I get home from work. Paypal doesn't work while i'm at work.

[2.0t03speed]

whats the price of the dp im very interested

[MSP2003.5_Nick]

whats the price of the dp im very interested

the materials alone for that thing were well over $250 so I'd say $100 plus shipping.

[KrayzieFox]

Dibs on ebrake cover and lower grill. PM sent.

[dmjddm9999]

How many miles are on the turbo?

[justanothermp5]

im very interested in the oil and coolant lines for the turbo
if your willing to part them out from the turbo

if not could u at least tell me the size of the fittings and how long the hoses should be lol

[Not Jo3L]

your selling two different pairs of springs for $25

and then another springs for $35

i dont get it?

[kstang]

Can I get a side shot of the Intake Manifold where the outside hole was plugged? Did you tap it and insert a bolt? If so what threading did you use? Also how much shipped to 39759.

Thanks
You can PM me if you would like.

[MSP2003.5_Nick]

im very interested in the oil and coolant lines for the turbo
if your willing to part them out from the turbo

if not could u at least tell me the size of the fittings and how long the hoses should be lol

I'm not parting out right at this second but I might depending on if someone buys the turbo and does not need the lines. The coolant lines are solid alumium pipe 1/4 inch this with banjo bolts on the turbo side. Oil line is 1/4 NPT and something right random on the other side. i dont even know. I can take pictures if you want.


your selling two different pairs of springs for $25
and then another springs for $35
i dont get it?

Because you can't read or look at exactly whats in the picture.


Can I get a side shot of the Intake Manifold where the outside hole was plugged? Did you tap it and insert a bolt? If so what threading did you use? Also how much shipped to 39759.

Thanks
You can PM me if you would like.

I tapped it and threaded a bolt in sealed with loctite and then JB welded and grinded down inside the runner. She isn't going anywhere. I forget what thread I used but here is a picture.

http://i250.photobucket.com/albums/gg241/msp20035_nick/sale025.jpg
http://i250.photobucket.com/albums/gg241/msp20035_nick/sale026.jpg

[justanothermp5]

a pic would be great, im not fully understanding the coolant line,
u could pm me the pic, i dont want to clog up your thread
all i have to do is tap the oil pan for the oil return line, but what do i do for the oil feed line? or do i have it backwards? lol

[slo03.5msp]

If you come down on price on the turbo i'll take it. If I do take it I don't want/need the lines that come with it if you can get a buyer for them. Pm me please.

[MSP2003.5_Nick]

a pic would be great, im not fully understanding the coolant line,
u could pm me the pic, i dont want to clog up your thread
all i have to do is tap the oil pan for the oil return line, but what do i do for the oil feed line? or do i have it backwards? lol


If you come down on price on the turbo i'll take it. If I do take it I don't want/need the lines that come with it if you can get a buyer for them. Pm me please.

This works great because that guy wants the lines haha, I'll pm you the details.

You will have to tap the oil pan for the return, the feed will have to come from the back of your block off of the stock oil pressure sensor. The coolant line comes in 3 pieces. one from the turbo to the 90 degree bend on the front of the engine (I have the special 90 with the nub for it) and the other two mate up and go behind the block.

[justanothermp5]

sweet i have a local msp so ill just ask to see his engine bay lol
how much did u want?
i just made a big purchase listed in my sig under *not installed
so please, please make it a low price lol

[kstang]

Will you take 140 shipped for the Intake manifold?

[MSP2003.5_Nick]

bump

[808MP5]

Trying to remember how your car goes back together = Priceless
http://i250.photobucket.com/albums/gg241/msp20035_nick/sale003.jpg

Love it :) LOL

[719prottege]

Hey man i could REALLY REALLY use that wastegate and bracket! a new one from atp is like $60, but it doesnt come with the bracket. could you take $40 shipped for the both? thanks alot, my wastgate crapped out on me, and i dont have the bracket lol.
also, nice FMIC, thats what my setup looks like... CXracing on Ebay?

[SIBalla23]

Pm sent for an ac part.

[el_Don]

How many miles are on the tokicos?

[MSP2003.5_Nick]

Bump

[slo03.5msp]

if you want to come down on the turbo let me know. Still intrested

[livelyjay]

Do you have the rear struts? Pleeeeease tell me you have the rear struts.

[2.0t03speed]

pm'd pm entire turbo assembly

[mannydingo]

Do you have the rear struts? Pleeeeease tell me you have the rear struts.

Oh yeah, if he has them, I'm sure he's going to give you a real low price with that wording(braindead of desperation in your post.

[MSP2003.5_Nick]

Oh yeah, if he has them, I'm sure he's going to give you a real low price with that wording(braindead of desperation in your post.

lol no I only have the front struts, already sold the rear ones to a buddy with a stock 3rd gen with blown struts. Sorry guys. I'll probably just end up making a table out of them because nobody wants 2 struts haha.

[23dude]

did you sell turbo mani?
i pm'ed you!

[2.0t03speed]

he traded it all to me for my cams

[23dude]

ugh -_- i need a damn exhaust manifold!!!!
someone sell me one!

[justanothermp5]

wait what? he traded the turbo with oil/coolant lines too?

NOOOOOO!!!!!!!!!!

NOOOOOOOOOOOOOOOOOOOOOO!!!!!

[2.0t03speed]

yep i got all of it fuckers should be here tommorow or the beginning of next week too

[justanothermp5]

u really need the oil and coolant lines?
because i do


i hope you know you just stopped my build from happening :(
lol not really, but where am i supposed to get the lines from now?
the dealership? HAHA i just paid 70 bucks for 3 gaskets, what a ripoff

[2.0t03speed]

need the coolant lines oil feed not so much

[justanothermp5]

sweet but hey tell me if these will work
http://cgi.ebay.com/ebaymotors/oil-drain-oil-feed-oil-line-kit-t25-t28-turbo-charger_W0QQcmdZViewItemQQcategoryZ33742QQihZ020QQ itemZ300245033234QQrdZ1QQsspagenameZWDVW

then i wont have a problem with u having all the stuff lol

oh and can a mod please delete the last 3 posts if u want, i hate clogging up peoples for sale threads

[MSP2003.5_Nick]

I dont think anyone is buying anything else anyway, all the cool stuff is gone haha. Oh well, they are good conversation pieces in the livingroom :p

[Not Jo3L]

lol no I only have the front struts, already sold the rear ones to a buddy with a stock 3rd gen with blown struts. Sorry guys. I'll probably just end up making a table out of them because nobody wants 2 struts haha.

How much miles on the front struts?

[MSP2003.5_Nick]

How much miles on the front struts?

Front struts have just under 60k miles on them. Still work fine, they are shiny too :p

[MSP2003.5_Nick]

Hey, just bumping for some feedback from the people i sent parts too, ie: did you get them ok and everything.

[kstang]

I got the Intake Manifold today. Thanks for a great seller! Items shipped as you said they were. They were packed well but boy USPS beat the package to hell!

Again Thanks for the easy transaction. This guy is top Notch A+