PDA

View Full Version : Gunmetal/Steel grey 18x7.5/8

AFcadet
07-16-2008, 10:44 AM
Wheeldude,

I looked around your site and you seem to have some choices for Gunmetal/Steel grey, but non of them are listed under Mazda3.

This just a error online...or do non of them fit mazdaspeed 3s
WheelDude.com
07-16-2008, 04:44 PM
If its a 8" wide 5x114.3 with a 48mm offset or 7.5" with a 45mm or 48mm offset it will fit

I believe the only steel grey wheel available is the tarmac 3 in 18x8

Zoeb
AFcadet
07-18-2008, 04:36 PM
On your website you have this listed...in gunmetal

Rota Torque
18 x 8, 5x114.3, 48mm, 56.1mm

Would that fit?
drledford93
07-18-2008, 05:05 PM
Wrong section...sorry!
AFcadet
07-18-2008, 06:31 PM
Wrong section...sorry!


how the hell is this the wrong section...I'm asking Wheeldude a question in his forum section
drledford93
07-18-2008, 09:32 PM
Cool your jets, dude...I mistakenly had thought I clicked on another thread. I didn't realize a mistake would get your panties in a wad.
AFcadet
07-19-2008, 12:40 PM
Sorry if I offended you.

I'm just impatient with ignorant people :)
Yoo Shin
07-19-2008, 03:01 PM
Rota needs more charcoal grey :)
drledford93
07-19-2008, 03:23 PM
Whatever...moron.
Marcus
07-19-2008, 10:16 PM
Whatever...moron.

what you should've done was not try to play moderator in the first place. would have avoided this entire situation that way.
AFcadet
07-20-2008, 12:35 AM
what you should've done was not try to play moderator in the first place. would have avoided this entire situation that way.

+1
protege_kid
07-20-2008, 12:38 AM
what you should've done was not try to play moderator in the first place. would have avoided this entire situation that way.

(werd)
drledford93
07-20-2008, 07:31 AM
It was a mistake, ok? I edited out my post and placed it where it needed to be. I even apologized for doing it! Jeez...
AFcadet
07-20-2008, 04:25 PM
It was a mistake, ok? I edited out my post and placed it where it needed to be. I even apologized for doing it! Jeez...

Um...apologizes that have the phrases, "Cool your jets" and "Don't get your panties in a wad" start to loose their effect of being an apology lol
drledford93
07-20-2008, 07:52 PM
Wrong section...sorry!
WheelDude.com
07-21-2008, 08:21 PM
On your website you have this listed...in gunmetal

Rota Torque
18 x 8, 5x114.3, 48mm, 56.1mm

Would that fit?

I'd have to machine out the hub for you, it would cost an additional $100 though

Zoeb
motocrosser614
07-22-2008, 12:09 PM
per your website you have rota torque 18x8, 5x114.3, 48mm, 73mm in the royal sports bronze is there anyway i can get that in gold?

Also whats the best tire to go with so i dont have rubbing issues on a stock susension setup?
WheelDude.com
07-22-2008, 07:42 PM
per your website you have rota torque 18x8, 5x114.3, 48mm, 73mm in the royal sports bronze is there anyway i can get that in gold?

Also whats the best tire to go with so i dont have rubbing issues on a stock susension setup?

unfortunately that is not in stock at our shop or ROTA USA

To order it, we'd need at least 3 people interested

Zoeb
motocrosser614
07-23-2008, 10:40 AM
unfortunately that is not in stock at our shop or ROTA USA

To order it, we'd need at least 3 people interested

Zoeb

Ill check around but for the time being do you happen to have any pics of the hyper black Torques on a black MS3?