cougar10agREDUX
07-08-2008, 04:00 PM
been up all night fiddling around, yay.
so i had this creak from the left front whenever more weight was put on that side. so i got under the car and found out one of the bolts for the swaybar bracket came loose. also i decided to take my filter off and wash it for shits and giggles, wasn't really that dirty.
then i figured while i had the wheels off i would get around to replacing the shitty front endlinks BC supplied with my coilovers with the AWR adjustables i had laying around. the AWR's were about an inch or 2 longer at their shortest so i figured it would help give a little more oversteer.
after that, i got bored and went ahead and installed the MSP strut bar. modifying the non strut bar cruise actuator bracket was not fun, but i got it to work.
well now the creak is gone and the car is snappier in the turns, and a little more solid. me likey.
also i found two bolts in my dad's crap that fit the hiboost cast BOV pipe perfect. so i cut them to size and installed the BOV adapter plate.
so i had this creak from the left front whenever more weight was put on that side. so i got under the car and found out one of the bolts for the swaybar bracket came loose. also i decided to take my filter off and wash it for shits and giggles, wasn't really that dirty.
then i figured while i had the wheels off i would get around to replacing the shitty front endlinks BC supplied with my coilovers with the AWR adjustables i had laying around. the AWR's were about an inch or 2 longer at their shortest so i figured it would help give a little more oversteer.
after that, i got bored and went ahead and installed the MSP strut bar. modifying the non strut bar cruise actuator bracket was not fun, but i got it to work.
well now the creak is gone and the car is snappier in the turns, and a little more solid. me likey.
also i found two bolts in my dad's crap that fit the hiboost cast BOV pipe perfect. so i cut them to size and installed the BOV adapter plate.