Creative Performance/CPBoost drag 323

[Creative Perf.]

I am trying to see if i am the only one with this amount of WHP in a FS engine!
This was done with 36 psi of boost out of a GT40R turbo.
I haven't been able to do some 1/4 mile numbers because of 2 broken trannys and one of them with everithng billet but the case split open!
http://i30.photobucket.com/albums/c345/CreativePerformance/Dynosheets.jpg
http://i30.photobucket.com/albums/c345/CreativePerformance/CIMG0314-2.jpg

[mspHtown]

jesus christ (boom06)





what is your next step with the transmission? do yall offer gears as well?

[junya1985]

that is so amazing i wish my msp could do stuff like that

[Antoine]

Woah! Nice way to introduce yourself...with a monster f'in setup! (2thumbs)

Suboosting to this thread and enjoy the Forums! :D

PS...I really dig the turbo intake setup...very cool with the air-brushing effects!

[shane02pro5]

I'd say you're the leader of the pack! Check out www.par-engineering.com (http://www.par-engineering.com)
from Austrailia if you haven't yet.

[Creative Perf.]

I'd say you're the leader of the pack! Check out www.par-engineering.com (http://www.par-engineering.com)
from Austrailia if you haven't yet.

I am their dealer in P.R. and they are also sponsoring my car!

[ND4MSP]

GAME OVER

subbing..

[Creative Perf.]

jesus christ (boom06)





what is your next step with the transmission? do yall offer gears as well?

Yes i sell and use PAR gears and the tranny is fully built by me with their gears, the gears wont fail so the car found the next weak part and crack the case of the tranny badly!

[khaosman]

That's a big snail you got on there!

[MikeLikesMazda]

that thing is sex

[greasemonkey524]

That's just hot! Wanna trade cars?

[Knox Joe]

Good lord.

[Mazdaspeed2oo35]

Wow... I swear man, these Puerto Rican Guys are loosing their freaking minds.. what a monster, wow.. any more pictures of these beast, any specs,, C'mon guys share with us what parts are you guys using engine and transmission wise !!!!

[mdl247]

crazy numbers just wondering tho with no ic no fans and what seems to look like a dinky radiator how the hell do you keep that car cool enough to even run down the 1/4mile?

[MSP4G63]

crazy numbers just wondering tho with no ic no fans and what seems to look like a dinky radiator how the hell do you keep that car cool enough to even run down the 1/4mile?

Looks like a 92-95 civic radiator which are really efficient used it in my friends old BP-T protege we put together. Congrats with that build, esta cabron!

[yellowmsp035]

wow.. so there is hope!

props dude.. pushing the limits for sure..

[orng1]

Wow, that is a nice set up.

[LinuxRacr]

He's in P.R. I should have know. You guys are serious about performance down there....Hell, I know one guy from P.R. here that's pretty serious as well... Awesome setup!!

[Speed3.5]

WHAT HAVEN'T YOU GUYS DONE TO THE CAR YET ??

I mean a lot have countered some limits/boundary to engines internal parts that will fail with 1/3'd of power your making, can you share some insights if you don't mind ??

Fucking sweet job dude, make some 1/4 miles .

Very interested in Tranny modification to keep it together.

[i like speed]

You are my hero!!! What kinda torque are you putting down? And how long have you been running 36 psi without your block exploding!? May be a dumb question but why no intercooler?

[jamesk]

i almost fell off my chair when i read that dyno chart. only crap!

[03silverproto]

No Words ___________________________________

[tweetyspeed]

(gossip)we are not worthy..we are not worthy!!!! were can i find those tranny parts you are running? please share your insight! internals and all please!!!PLEASE!!!

[evilmonkeyMSP]

Jebus....

more pics?

[CrazyCaker]

wow....

Can you share what parts you're using in your build?

[erick pina]

everytime I see a car like that I miss Puerto Rico, I want to go back.

[erick pina]

Puertorican dont like to share.

[Mazdaspeed2oo35]

What's the point of Joining these Mazda Community Forum if you are not willing to share and tell what you have ? I mean is not like we are going to compete with them in a Business Wise. the fun part of these community is to share to other what do you have, have you done, and how fast, big and unique you are ,or just share what you have done, don't matter if is a simple mod, stickers, custom stuff,, what it matters here at least to me is to share, and learn..

[mike_moss]

Why an FS instead of a BP?

That's a BG afterall...

[azian6er]

no intercooler ftw. Alky injection??

[SeR_Cyclops]

man if its a track car you really dont need a intercooler cause it dont run really long enough for the benefits of a intercooler to be seen.

[shane02pro5]

I'm sure it has meth inj!

You'd have to cool the intake temps down somehow or you'd be melting things!

[LittleSkinsk]

still its friggen sweet

[speed1585]

yes that looks simply amazing...I think if most of our MSP's were not daily drivers, it was our job and we were sponsored we would be a lot less careful, do things right the first time and we could have beasts too.... but we gotta drive ours daily... maybe he drives that daily in town idk....

[Creative Perf.]

Wow... I swear man, these Puerto Rican Guys are loosing their freaking minds.. what a monster, wow.. any more pictures of these beast, any specs,, C'mon guys share with us what parts are you guys using engine and transmission wise !!!!

Hi,

The engine is a FS 2.0l from a protege 2003, the tranny parts are from PAR eng. and ensambled and modified by me, the head has 5K invested in parts without the labor and the full race port job i did. The tires are MT 26x10x15 in bogart wheels. A haltech E6X tunned by me also in my inhouse Dyno.
75 mm trotle in a custom intake manifold done by me, its better if i do a list but not now. Lets leave some for tommorow!

[Creative Perf.]

WHAT HAVEN'T YOU GUYS DONE TO THE CAR YET ??

I mean a lot have countered some limits/boundary to engines internal parts that will fail with 1/3'd of power your making, can you share some insights if you don't mind ??

Fucking sweet job dude, make some 1/4 miles .

Very interested in Tranny modification to keep it together.

Just pauter rods and CP pistons and cometic gasket and head studs.

About 3 years ago before a started my business and had a lot of free time, i ran 9.78 @ 147 mph with wheely bars and a 2,200 pounds of weight and 24.5x9x13 MH slicks. there are some videos in youtube, let me get it, wait!

Ohh here it is:http://www.youtube.com/watch?v=SR7IrY6UcGk

[Creative Perf.]

I'm sure it has meth inj!

You'd have to cool the intake temps down somehow or you'd be melting things!
No! there is no meth inj since it is just 9 sec running, maybe less(yippy)

[Creative Perf.]

(gossip)we are not worthy..we are not worthy!!!! were can i find those tranny parts you are running? please share your insight! internals and all please!!!PLEASE!!!

Very easy, PAR gears, they will hold whatever you throw at them andi am their dealer in P.R.

[shane02pro5]

Wow I didn't know you could do that...most drag cars that I've seen had either a huge intercooler or meth.


Were you using the bearing brace that PAR makes that seats inside the tranny case when yours blew?


No! there is no meth inj since it is just 9 sec running, maybe less(yippy)

[mazdaspeedwerx]

cant wait for that list. I am sure this will bring some buisness to you

[2.0t03speed]

sub

[25FConv]

^ me too

[shane02pro5]

Hi,

The engine is a FS 2.0l from a protege 2003, the tranny parts are from PAR eng. and ensambled and modified by me, the head has 5K invested in parts without the labor and the full race port job i did. The tires are MT 26x10x15 in bogart wheels. A haltech E6X tunned by me also in my inhouse Dyno.
75 mm trotle in a custom intake manifold done by me, its better if i do a list but not now. Lets leave some for tommorow!

[Speed3.5]

Nice work man, but w/ that power wouldn't you be around 8 sec ??

Take a look at this issue we recently have tackled and can you tell us how did you do to overcome it or did you use different approach ??
http://www.mazdas247.com/forum/showthread.php?t=123700949


And deff. looking forward to the "mod" list you have, even though most important/valuable parts were the custom jobs done by you.

[MSPLIFE]

well i can only hope that one day i can make at least half of the power you got!!! EXELLENT WORK!!!!!!!!!!!!!

[JoseProte83]

Hey Carl! Glad to see you here. He is working right now on my cousins FD. I will post pictures of the work when done. I doubt he will let me take pictures of the wagon also lol but I will try to.. Hehehehehe.....

[Spooler]

Engineering beauty....nice job!

[Creative Perf.]

Wow I didn't know you could do that...most drag cars that I've seen had either a huge intercooler or meth.


Were you using the bearing brace that PAR makes that seats inside the tranny case when yours blew?

Not at that moment ,but now it will have it.

[Creative Perf.]

cant wait for that list. I am sure this will bring some buisness to you

Here are some more parts:
1-Equal lenght SS header custom by Creative
2-custom 3.5 down pipe SS by Creative
3-44mm tial waste gate
4-# inch alum presure pipe custom Crea.
5-BOV tial 50mm
6-custom valves ss
7-custom retainers titanium
8-custom springs
9-Full racing port job by Creative
10-custom intake manifold by Creative
11-Custom fuel rails for 8 injectors Creative
12-pauter rods
13-CP pistons
14- cometic gasket
15-head studs ARP
16-haltech E6X
17-Custom 2 stage boost controler Creative
18-MSD dis 4 HO
19-Custom axles Creative
20-MT tires 26x10x15
21-Bogart wheels 15" front
22-3.5x15 rear wheels Bogart
23-Custom wheely bar Creative
24-Honda Civic radiator

there are a lot more parts but that is good for today!

Ahh and stock crank shaft and stock oil sistem and revving 9k all the time.
Here, look how it sounds and this is the pass were the tranny broke:
http://www.youtube.com/watch?v=avTp9KsxOUU

[2.0t03speed]

sweet

[Creative Perf.]

Hey Carl! Glad to see you here. He is working right now on my cousins FD. I will post pictures of the work when done. I doubt he will let me take pictures of the wagon also lol but I will try to.. Hehehehehe.....

Hi , i can post the photos of the FD when i finish it, but the wagon...(gun)

[JoseProte83]

Hi , i can post the photos of the FD when i finish it, but the wagon...(gun)



JAJAJAJAJA lol. No te preocupes. JAJAJAJAJA

[JDM Sam]

Haltech + big turbo = power

What octane gas were you using on that dyno?

[MAZDA_SPEED]

Pictures Please!!!!(first)

[MSP2k3]

subn

[HighwayUFO]

http://i50.photobucket.com/albums/f327/HighwayUFO/ICame2.jpg

Holy mother of GOD! You are my hero.

[Creative Perf.]

Haltech + big turbo = power

What octane gas were you using on that dyno?

VP 116 oct gas!

[Creative Perf.]

Pictures Please!!!!(first)

I have more pictures in my web site.http://www.cpboost.com/
in the forum.

[bruster4_5]

that's it i give up...selling the car getting a moped

[shane02pro5]

You guys have some great looking stuff on your site.

When it comes time for a new turbo, turbo mani and intake mani I'll be coming to you!


I have more pictures in my web site.http://www.cpboost.com/
in the forum.

[sandspeed]

100mph rolls anyone?

haha that thing is a work of art

[Creative Perf.]

You guys have some great looking stuff on your site.

When it comes time for a new turbo, turbo mani and intake mani I'll be coming to you!

Thanks man , i am at your service!

[mazdaspeedwerx]

do you make those intake manifolds?

[shane02pro5]

Yes, see post 35.

[JoseProte83]

He can fabricate anything you want.....

[Antoine]

Thanks man , i am at your service!

Hello once again...Please keep in mind that if you wish to conduct business on Mazda Forums, you'll need to obtain Authorized Vendor status before doing so...Here's a link to apply:

VENDOR Application Forms - Updated June 1st '08! (http://www.mazdas247.com/forum/showthread.php?t=54156)

Thank you and Enjoy the Forums! :D

[DiscreetSpeed]

Um yea this deserves a .....

[Metallic36]

Holy freakin crap.
(bowdown)

[yellowmsp035]

bump for more info??? haha revisted this legend

[foild1]

ummmm. wow. ummm.. wow. I wish the only road I needed to travel was the 1/4mile strip @ the track, and I would aim to have a ride like this!

[Boosted_Speed]

dam that car is sick as #%*¥ nice set up that's how us puerto ricans do it lol

[indar]

I am trying to see if i am the only one with this amount of WHP in a FS engine!
This was done with 36 psi of boost out of a GT40R turbo.
I haven't been able to do some 1/4 mile numbers because of 2 broken trannys and one of them with everithng billet but the case split open!
http://i30.photobucket.com/albums/c345/CreativePerformance/Dynosheets.jpg
http://i30.photobucket.com/albums/c345/CreativePerformance/CIMG0314-2.jpg

hai my name indar from indonesia country. I have mazda 3 4-door 2007 non turbo. I want to upgrade my engine with turbo, but i dont have parts store for mazda 3, i m looking for piston & ring ( low comp), connecting rod, main & con bearing,head studs, iron liner, head gasket, cam shaft, valve & valve spring. Please confim to my email ( olimart_motosport@yahoo.com )

[ueat1023]

Bloody Sick -Mate

[Boosted_Speed]

stock block?

[Spiced MSP]

This thread is from 2008...

[Spiced MSP]

stock block?

if you are referring to the picture above, then no. everything on that car is custom built..built motor, custom built head, custom intake and exhaust manifolds and completely built transmission. Nothing on that car is stock This old thread was brought back by a new member with 1 post asking about parts for their Mazda 3. Although this thread does reassure me that power can be made with the FS block and G series tranny...with money of course..lol

[Boosted_Speed]

lol i know the internals arent stock i was referring to the sleeves lol