where to find fuel rail spacers and plastic o rings

[mazdaspeedwerx]

I just got around to installing a 626 mani and when I went to put the fuel rail back on the spacers are too small. does anyone know where to get them at? also I somehow destroyed the plastic o rings on the bottom of the injector so I need those also

[shane02pro5]

Dealer! Mazdapartzone.com The injector insulators that seat in the bores in the mani are like $9.xx each and the spacers for the rail are like $10 each.

[mazdaspeedwerx]

damn thats sucks. I think I am going to rig something up for the spacers at least

[shane02pro5]

I agree..major rip-off. They do call the spacers insulators too though so I'm not sure if they keep heat from the fuel rail somewhat??

[mazdaspeedwerx]

dunno, I think I am just going to cut some copper tubing to length and use that as a insulator/ spacer. maybe paint the peices to match the rest of the engine bay

[shane02pro5]

Alot of guys stack metal washers on top to give more clearance for bigger longer injectors. Sould be fine!

[dominoy2k1]

i used washers.

[mazdaspeedwerx]

brilliant, I didnt think about washers

[ForceFed]

Or you can get a piece of ROund Aluminum Bar stock from Home depot and Drill the center..Make your owm spacers..Cut to length.

[StealthWyvern]

Or you can get a piece of ROund Aluminum Bar stock from Home depot and Drill the center..Make your owm spacers..Cut to length.

sounds like a good idea