GI: Mazdaspeed Smic, J-pipe mid pipe combo

[bstdtimsp]

Alright Guys! Very Very Very exciting NEWS! I have come into possession of a good amount of MazdaSpeed Side mounts and J-Pipe mid pipe catless downpipes from there stock for the old Speed World Challenge cars. These side mounts are like nothing on the Market right now the end tanks are made from billet aluminum and the intercooler cores are top notch. The J-pipe mid pipe combo is also top notch welds are amazing it looks like it is 2" not to sure I will double check when I post pictures. Also, I can sell the J Pipes with a high flow cat as an option that you can take to your local muffler shop to get welded up. I will have about thirty units of each coming in from Mazda NA and when they are gone there is no more. Pricing will be cheap way cheaper than any other side mount on the market and the J Pipe will be cheap as well.

Final Pricing on the SMIC is $445 shipped I only have access to 7 so they will go fast!

Final Pricing on the Down pipe is $250 shipped and I have access to 32

Lets get a list going and please put what part you want

I have one set of Tanabe Protege 5 Springs that I can sell for $144.00 plus shipping

For pictures see post 19 & 20

[bstdtimsp]

Mods if needed I will apply for vendor status

I want to start a list to see how many people would be interested


bstdtismp
2. RuskeyJDM
3.JBoost
4. theezv
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.

[fillyspeed]

hmmm sounds very nice(rockon)...whats the prices lookin like?(dark)?

[2.0t03speed]

would need pics and prices

[bstdtimsp]

hmmm sounds very nice(rockon)...whats the prices lookin like?(dark)?

I will post price when i post pictures later today

[mikeski]

waiting for pics and prices!! :)

[bstdtimsp]

pics coming up soon

[evilmonkeyMSP]

Yes, please get pics up. I know you're just GI interest now so thats fine. You'll want to contact Antoine about becoming an AMM or AV

[bonospeed]

def interested in ic pending price/pics

[theEZV]

def interested in ic pending price/pics

+1

[mx-p5]

Also intrested pending pics and price

[bstdtimsp]

Pictures will be posed around 2pm pst. The down pipe is 2" but no cats and includes a flex joint

[fr0st]

bump for the SMIC

[Outlawstar98]

Subs for pics.

[jcdennis]

Interested in the SMIC... of course pending pics and price. :)

[Jboost]

Another SMIC option that will be cheaper definetly interested. If it was good enough for the challenge cars it is good enough for me lol. Hurry up with price and pics i'm freaking out cause of this work is going to suck for the next 3.5 hours.
Any idea on how large the core is and wether or not the inlet and oulet are in stock location and stock size?

[SIBalla23]

Subbin

[bstdtimsp]

Another SMIC option that will be cheaper definetly interested. If it was good enough for the challenge cars it is good enough for me lol. Hurry up with price and pics i'm freaking out cause of this work is going to suck for the next 3.5 hours.
Any idea on how large the core is and wether or not the inlet and oulet are in stock location and stock size?

inlet and outlet is in stock location and core size is about the same as custom msp but core looks very nice! pics will be up soon

[bstdtimsp]

Here are some pictures of the smic and price would be around $445 maybe even lower (shocked)

Notice the tool marks inside the end tanks made from a block of billet aluminum on picture 3

[bstdtimsp]

Now its time for the mid pipe (wow)

[bstdtimsp]

bump bump pics are up

[fellfrosch7]

Interested in the midpipe, depending on the price...

[bstdtimsp]

Interested in the midpipe, depending on the price...

Mid pipe shouldn't be too much its good quality I believe its stainless and the welds are perfect i will have pricing up later tonight for sure (nana)

[i like speed]

subscrizzle for more info. This is a replacement for the stock smic? So any pipes that fit the stock will fit this?

[kamon8404]

Nice looking smic

[theEZV]

im definately interested in the smic

[bstdtimsp]

subscrizzle for more info. This is a replacement for the stock smic? So any pipes that fit the stock will fit this?

yup that is correct stock pipes will fit

[bstdtimsp]

mid pipe is perfect for stock exhaust super sleeper exhaust but still get some ponies from it

[bstdtimsp]

I have two intercoolers in my possession right now and I'm waiting to hear back from my contact on how many more i can get and then i will decide final final pricing

[In4am0sPuN]

You had said the mid pipe is 2 in? hopefully its 2.5 or 3 in =D

Cause I am currently in the market for a complete downpipe + hi flow + exhaust

I was currently going to go with a custom downpipe, hi flow, and then EITHER the greddy sp2 OR evoII exhaust

but depending on how much this goes for (+ the hi cat as u said in post 1), I might just have a winner for the mid pipe

[bstdtimsp]

You had said the mid pipe is 2 in? hopefully its 2.5 or 3 in =D

Cause I am currently in the market for a complete downpipe + hi flow + exhaust

I was currently going to go with a custom downpipe, hi flow, and then EITHER the greddy sp2 OR evoII exhaust

but depending on how much this goes for (+ the hi cat as u said in post 1), I might just have a winner for the mid pipe

alright just checked the size and its 2 1/2" this would be a perfect match for the greddy exhaust because the greddy flange is designed to mate to the stock mid pipe

[69RMSP]

subbing...

[bstdtimsp]

bump lots of questions being asked final pricing will be up tomorrow

[ruskeyjdm]

Count me in for the SMIC.

[Jboost]

yeah i'm pretty sure that one of those SMIC will be mine put me on a list for sure. Looks badass and the price is right fuck here comes the mod bug.

[bstdtimsp]

list has been started in post #2

[TheMAN]

ok, this is news to me if the world challenge proteges had turbos on them and that the cars were MSPs... last time I checked they were protege DX's which were gutted and upgraded with a built NA engine

[Aricjm15]

ok, this is news to me if the world challenge proteges had turbos on them and that the cars were MSPs... last time I checked they were protege DX's which were gutted and upgraded with a built NA engine
you would be correct sir, I know a person who worked with one of the race teams building engines. lots of headwork, heat/friction coated pistons, lightened rods and a few other tricks but never any boost

[Spooler]

SMIC if the price is right

[fr0st]

bump for price on SMIC

[bstdtimsp]

ok, this is news to me if the world challenge proteges had turbos on them and that the cars were MSPs... last time I checked they were protege DX's which were gutted and upgraded with a built NA engine

I just got a response from my buddy at Mazdaspeed Usa and these intercoolers were going to be a factory upgrade but they got pulled Also the j pipe mid pipe combo was used for racing!

[bstdtimsp]

you would be correct sir, I know a person who worked with one of the race teams building engines. lots of headwork, heat/friction coated pistons, lightened rods and a few other tricks but never any boost

Sorry about that mix up I got confused with the intercoolers and the j pipes. Intercoolers were made by Mazdaspeed Usa and so were the mid pipes but the mid pipes were actually used pricing is up check it out!

[evilmonkeyMSP]

you're going to need AMM status before this can continue.

[bstdtimsp]

bump bump

[bstdtimsp]

you're going to need AMM status before this can continue.

Ok I havn't ordered any more parts only two intercoolers and one down pipe from my buddy I would like to get some sort of list going so I don't order too many is that ok? Also I won't sell anything till I have AMM Status.

[theEZV]

add me to the list for an smic (pending price of course)

[bstdtimsp]

add me to the list for an smic (pending price of course)

price is listed at $445 shipped i will add you to the list

[bstdtimsp]

bump lets get that list going so i can pick up my AMM Status and pick up those parts

[fr0st]

price is listed at $445 shipped i will add you to the list

that ain't much less thn the competitors.. not by much anyways..

[Jboost]

That is quite a bit more than quoted price. It's pretty much the same as a customMSP SMIC, which has dyno proven gains.

[evilmonkeyMSP]

(werd)
That is quite a bit more than quoted price. It's pretty much the same as a customMSP SMIC, which has dyno proven gains.

[bstdtimsp]

That is quite a bit more than quoted price. It's pretty much the same as a customMSP SMIC, which has dyno proven gains.

I know I'm sorry I thought i was going to have 30 units then there were only 7 I have a dyno that i can test it on if needed but i would need a stock msp in my area

[bstdtimsp]

Just a heads up too the mazdaspeed usa price is $960 list so its over half off from that price

[fr0st]

Just a heads up too the mazdaspeed usa price is $960 list so its over half off from that price


by mazdaspeed usa price... you mean the price of the OEM unit on our cars ??

i hope not.. that's kind of uncomparable..

[bstdtimsp]

by mazdaspeed usa price... you mean the price of the OEM unit on our cars ??

i hope not.. that's kind of uncomparable..

no its not for the stock unit its for These intercoolers that Mazda had made in hope to sell as a factory option.

[fr0st]

no its not for the stock unit its for These intercoolers that Mazda had made in hope to sell as a factory option.

wha???

mazda has got these as an option ??

really?

[evilmonkeyMSP]

I think he mentioned that they were going to sell them as a dealer option but it never happened....news to all of us...

but at that price ($960) most would have laughed in their face...
wha???

mazda has got these as an option ??

really?

[bstdtimsp]

I think he mentioned that they were going to sell them as a dealer option but it never happened....news to all of us...

but at that price ($960) most would have laughed in their face...

evil is right they were going to sell them as an option but pulled the plug the intercoolers are very good quality and the end tanks are extremely nice as well i will post better pictures later

[evilmonkeyMSP]

for the time being, until you establish AMM status, please post pics w/ proper forum pics per the F/S rules.

[bstdtimsp]

for the time being, until you establish AMM status, please post pics w/ proper forum pics per the F/S rules.

K i will post more pics later today

[fellfrosch7]

The same SLS midpipe is $250 new from Protegegarage.com and so is the CustomMSP SMIC ($445)... I was expecting something like $150 shipped for the midpipe, so i'll back off the list unless the pricing goes down.

[bstdtimsp]

The same SLS midpipe is $250 new from Protegegarage.com and so is the CustomMSP SMIC ($445)... I was expecting something like $150 shipped for the midpipe, so i'll back off the list unless the pricing goes down.

I'm working on getting the price down a little When I get vendor status i plan on doing some combo's possibly intercooler with a samco hose or intake and mid pipe with an exhaust or intercooler and clutch let me know what you guys would like to see up I will give great pricing

[bstdtimsp]

bump

[CustomMSP]

I believe those pieces used to be sold by Protosport. I know the downpipe is, because I used to have one. It's a very nice piece, lasted me for over 3 years until I upgraded to a new setup. It's actually 2.25" in diameter, fully stainless steel with a perfect fit.

[Boosted03MSP]

I am doubtful that was made by Mazdaspeed USA, or was an older design. The original bidding to do the MSP turbo kit was between Begi and Calloway and neither of them made that SMIC. My brother has worked for mazda for years and neither of us have ever heard this. Are you %100 positive it was mazda? I even called Mazdaspeed 800 number and they had no idea of a past intercooler upgrade that was supposed to be sold at a dealership parts dept.

I would purchase one if i knew more info on where they came from. The custommsp smic is the same price and is a quality piece. Hard to spend the same amount and not know anything about this

[bstdtimsp]

I believe those pieces used to be sold by Protosport. I know the downpipe is, because I used to have one. It's a very nice piece, lasted me for over 3 years until I upgraded to a new setup. It's actually 2.25" in diameter, fully stainless steel with a perfect fit.

Its pretty close to being the same down pipe that protosport made its a very quality piece and it is full stainless steel

[bstdtimsp]

I am doubtful that was made by Mazdaspeed USA, or was an older design. The original bidding to do the MSP turbo kit was between Begi and Calloway and neither of them made that SMIC. My brother has worked for mazda for years and neither of us have ever heard this. Are you %100 positive it was mazda? I even called Mazdaspeed 800 number and they had no idea of a past intercooler upgrade that was supposed to be sold at a dealership parts dept.

I would purchase one if i knew more info on where they came from. The custommsp smic is the same price and is a quality piece. Hard to spend the same amount and not know anything about this


Just got confirmation that it was going to be a factory option but the deal feel through they have been sitting since late 2002 they were not made by mazda but contracted out to another company which I'm not to sure of. The people you talked to probably have no idea because I'm sure people in that position come and go often. Any more info that i can find out i will for sure keep you updated I'm thinking about selling this as a combo with a samco hot pipe. I will keep you guys updated.

[bstdtimsp]

bump bump (cabpatch)

[Boosted03MSP]

I already have the samco hot pipe. Find out who actually manufactured the smic and pm me and i will buy one.

[Spooler]

I was expecting less, so I'll remove myself for the SMIC race....but good luck selling them, they look like a nice product

[bstdtimsp]

I already have the samco hot pipe. Find out who actually manufactured the smic and pm me and i will buy one.

I will keep you updated

[bstdtimsp]

I was expecting less, so I'll remove myself for the SMIC race....but good luck selling them, they look like a nice product

We will be doing specials as well hopefully with the samco hot pipe.

[FLAMSP]

Interested, bump for info.

[bstdtimsp]

Interested, bump for info.

I just sent an pm to antoine for vendor status hopefully I can start selling these next week

[TreFlip999]

I just sent an pm to antoine for vendor status

Hmmm...

[bstdtimsp]

Hmmm...

Hmmmm what? haha

[bstdtimsp]

bump bump

[m_V_p651]

like how the smic looks but looking want a fmic :)

[bstdtimsp]

like how the smic looks but looking want a fmic :)

What mods do you have a fmic isn't really practical for our cars under 10 psi you loose a lot of throttle response and its throttle response that makes our cars so fun to drive!

[bstdtimsp]

bump

[bstdtimsp]

bump

[bstdtimsp]

bump

[bstdtimsp]

bump bump

[ratz1984]

still got the tokico springs? PM'ed!

[skilletrx]

any msp'ers buy the SMIC yet? any luck w/ install?

[Jasonboy]

Wow that smic looks very nice. Would love to see some installed pictures

[RX]

Interested.

[RX]

still no vendor status...

[alca0811]

bump for updates

[theEZV]

i think its safe to say that this is dead

[alca0811]

damn it. those midpipes looked sweet.

[bstdtimsp]

I still have these parts in my garage and I can post dyno chart with the msp and mid pipe I just didn't think there way any interest.

[alca0811]

maybe not for a group buy, but there may be enough interst for you to sell them on an individual basis. How much u askin for again??

[bstdtimsp]

maybe not for a group buy, but there may be enough interst for you to sell them on an individual basis. How much u askin for again??

It doesn't have to be a group buy and I will finish my vendor status for you guys

[Viralphrame]

Those SMICs look amazing. I don't guess you could come down on the price a little? Say $400 or something?

[bstdtimsp]

Those SMICs look amazing. I don't guess you could come down on the price a little? Say $400 or something?

The best I can do at this time is the orginal price

[Viralphrame]

The best I can do at this time is the orginal price

In that case, post some dimensions and pics w/ forum signage. I'm interested. I know some people have fitment issues with the CustomMSP sidemount, so I'd like to know if there's any small difference in size with these.