PDA

View Full Version : rear reflecters


mazdaspeedkid
03-24-2008, 06:30 PM
i was wondering how would u take off the rear reflecters on the bumper on the side and the back need info asap thanks
LV_MS3
03-24-2008, 07:26 PM
are you talking about all 4 reflectors on the back end of the car ...... or just certain ones
mazdaspeedkid
03-24-2008, 07:42 PM
are you talking about all 4 reflectors on the back end of the car ...... or just certain ones

ya the two on the sides and the to on the way back on the black part of the bumper i need to know asap i want to paint them black
redspeed3tk
03-24-2008, 07:48 PM
side ones pop right out ya can see the back from under the car...just push the one clip in.. but the back ones i couldnt get to come out and didnt wanna break them
mazdaspeedkid
03-24-2008, 07:52 PM
side ones pop right out ya can see the back from under the car...just push the one clip in.. but the back ones i couldnt get to come out and didnt wanna break them

thanks for the info i really need to know about the back ones thou cause i know its been done and im getting them painted tommorow morning i was thinking u can push it out with a flat head screw driver
BLAZEONE
03-24-2008, 09:36 PM
Since we are on the topic..

Do they make a black "lamin-x" type cover pre-cut for our reflectors?
mazdaspeedkid
03-24-2008, 11:45 PM
Since we are on the topic..

Do they make a black "lamin-x" type cover pre-cut for our reflectors?

hmmm thats a good one i really dont know i think so cause they got the headlights so they might have it
Mspeed3
03-24-2008, 11:49 PM
3m makes stuff so does johnson tint
Haltech
03-25-2008, 03:39 AM
You have to drop the bumper to do the rears. Screws hold them in. Besides, it makes life easier when you wiring them up.
Oldcabin
03-25-2008, 05:16 PM
Yep - have to remove the bumper....it's not hard.
Remove tail lights, then there are 4 screws and 2 plastic clips holding it on.
You can PM me for more details if you want. I know there is a how-to floating around somewhere.
mazdaspeedkid
03-25-2008, 08:42 PM
Yep - have to remove the bumper....it's not hard.
Remove tail lights, then there are 4 screws and 2 plastic clips holding it on.
You can PM me for more details if you want. I know there is a how-to floating around somewhere.

pm sent thanks