Ballast Location for MS3?

[SMITTNME]

Just wondering where you guys with aftermarket HIDs installed your ballasts...mainly the passenger side.

[Moonpie.Express]

You guys get them in last night?

Will call you as soon as I have a solid time from my better half.

Nice talkin' with you last night.

[SMITTNME]

Nope, we decided to wait until today to do it, do you have aftermarket HIDs?

Sounds good, and nice talking with you too!

[bmman93]

i ziptied it to the fender edge. its kinda right under the fender hood gap behind the head lights. i had to seal the connector wit silicone to keep the from turing off b/c of gettin wet and havnt had a problem since! works like a champ

retrofited a set from a g35 in to my ms3

[Falconx84]

Passenger side: I initially used double-sided tape on the inside of the fender liner but it fell off after a month or so, now I have it tucked up on the strut brace, just sitting there until i find a better place

Driver side: double sided tape to the top of the fuse box

[SMITTNME]

Thanks for the posts! We found a good spot down by the frame on the passenger side and the other one is tucked away beside the battery :)

[Imprtracr1]

I placed it where the factory ballasts are... underneath on the bottom of the headlight housing. and the fog ballasts are on the left and right frame on either side of the engine.