PDA

View Full Version : Aem SRI


DubbyDoo
03-13-2008, 01:56 PM
http://i24.photobucket.com/albums/c37/DubbyDoo/Picture004.jpg
http://i24.photobucket.com/albums/c37/DubbyDoo/forsale/Picture025-1.jpg
http://i24.photobucket.com/albums/c37/DubbyDoo/forsale/Picture021.jpg
http://i24.photobucket.com/albums/c37/DubbyDoo/forsale/Picture013-1.jpg
http://i24.photobucket.com/albums/c37/DubbyDoo/forsale/Picture023-1.jpg

for protege 2.0 NA
50$ shipped



same as this intake
http://i2.photobucket.com/albums/y13/cbrjeeper/DSC00395.jpg

picture thanks to Pro5x2
SpicyorangeMSP
03-13-2008, 02:02 PM
I am interested do have more pics? Does it come with a filter?
DubbyDoo
03-13-2008, 02:05 PM
the filter it has on it now needs to be replaced and dont have any other pictures
DubbyDoo
03-13-2008, 02:06 PM
not for the msp btw
autoxes
03-13-2008, 02:09 PM
Fits the 1.8l Proteges too.
SpicyorangeMSP
03-13-2008, 02:09 PM
Yeah I'm looking for my P5. Is it just the 2 metal pieces and one coupler? And is the part that connects between the intake manifold and the air flow meter have a part to mount the solenoid and clear the Master brake cylinder?
DubbyDoo
03-13-2008, 02:12 PM
theres two in the picture i have the third in a box
DubbyDoo
03-13-2008, 02:14 PM
ill have to look on the pipe im not sure havent used it in about 4 months
SpicyorangeMSP
03-13-2008, 09:42 PM
Let me know what you find out cause both those pieces look like they go before the air flow meter and there is no piece that goes between the intake manifold and the air flow meter. Thanks.
lil_red_wagon
03-13-2008, 10:35 PM
it is all there minus just one coupler. i have this intake and i like it more than my old injen CAI
DubbyDoo
03-13-2008, 10:48 PM
come to think of it i think a friend got that piece cause he needed it
SpicyorangeMSP
03-13-2008, 10:50 PM
The small piece has a hole for the sensor before the air flow meter. The part that I say is missing has a bracket for the solenoid and a nipple for the crank ventilation. I am I wrong.
lil_red_wagon
03-13-2008, 11:38 PM
the two intakes (the one in the picture and the one for sale) are not exactly alike. mine is like the one in the picture and a person that i know in dallas has one just like the one up for sale. i guess that they were just redesigned some time in there. the small elbow pipe has a place for the IAT and that is supposed to be mounted on the intake manifold. the MAF then mounts to the small elbow and the larger elbow mounts to that. the whole intake is only two pieces. i would show you a picture of mine, but it is identical to the one that is shown in the installed picture. mine has the bracket for the solenoid but i have seen some that don't.
SpicyorangeMSP
03-13-2008, 11:52 PM
Thanks for the info. What about the nipple for the crank case vent? Does this rub against the master cylinder? Cause I currently have an Ebay that has a hole it from rubbing the master cylinder that the previous owner installed.
lil_red_wagon
03-14-2008, 11:51 PM
no, mine mounts really solid in my engine bay. i was actually surprised since my injen used to float a lot, but this one doesn't. my crank case vent is on the smaller elbow piece, but i don't really see one on this intake. a lot of them don't have them now since everyone is just putting little filters all over their motors now. i would be inclined to buy this if i didn't already have one. i paid 70 shipped for mine, used, for my pro5.