Prosport Elec. Boost gauge installation help?

[jy1051]

Hey guys. Currently my car is in the shop right now for some unknown turbo problems so i decided to take out my prosport elec boost gauge and read up on the installation. I've never installed a electrical boost gauge so its a little different for me. Does anyone have a detailed install guide that i can use because i find the prosport guide a little weird. my main concern is the wiring.

What goes to what? what is ACC? i'm looking to run white during the day and amber at night but if its too much trouble ill just run amber the whole time. so please. someone break it down. thanks and i appreciate it.

pray for my car as well. 14xx miles and in the shop.

[hectik1]

white "light" wire goes to an accessory wire. This makes it so when you turn the key, it will light up white.

orange "light" wire goes to the positive wire from one of the dashboard lights. This will make it so when you turn on the lights, it will light up amber.

The other positive wire goes to another accessory wire and the negative wire goes to a ground (metal contact).

[jy1051]

okay so they're 4 different wires. Orange/white/black/red?


can u use examples on which to go to which? dimmer switch yadda yaddda? sorry...;(

[fragchild]

Using Add a circuits
I used "cigar" for power (red wire),
"IG SIG" for White Illumination (white wire)
"Tail L" for Amber Illumination when the I turn the lights on. (green or orange wire? I can't remember)

I ran the ground to the bolt under the driver side kick panel

[LENNY127]

i would like to hear more about the turbo problem...........

[jy1051]

read up on "HELP I DUNNO WHATS WRONG" in the same forum... sucks and i just added more bad news to it.