PDA

View Full Version : For those who have the Corksport Downpipe and Mid-pipe...


aaronc7
03-08-2008, 09:00 PM
How in the world do you connect the Downpipe to the Mid pipe??? The bolts don't appear to be long enough. The stock mid pipe (cat) the flange is a lot "thinner" so this would probably work but doesn't seem to be long enough when you have their downpipe/mid pipe together. Am I missing something or do I just need to go out and buy bolts that are a little longer?

You'd think Corksport would provide hardware to make their two components fit together when you buy them together....
oskinosmee
03-08-2008, 09:05 PM
Use the old bolts.
aaronc7
03-08-2008, 09:13 PM
is that what you did? or just an idea...i think i tried all possible combinations of bolts and stuff
oskinosmee
03-08-2008, 09:21 PM
we used them for my car.
aaronc7
03-08-2008, 09:22 PM
kk, ill go look again...i just started it up with open down pipe holy crap, lol. I think my neighbors hate me already
aaronc7
03-08-2008, 09:47 PM
the longer stock bolts will work for the mid pipe to stock catback, but still too short for downpipe to mid pipe. ghey ghey ghey
Tagkat
03-08-2008, 11:41 PM
Go buy some from home depot. Use the M10 1.25 thread I think 70mm and get the matching flange bolt and regular hex bolt. My DP came with longer bolts. It also looks like you have hella gap there.
aaronc7
03-08-2008, 11:45 PM
Yeah I'm gonna stop by tomorrow. I'm pretty sure they are pretty close/snug.. well maybe not in the pics I think the mid pipe fell down half way thru taking pics. But even when I had them snug as possible it was just a hair short.

pic for fun!
Jesse MS3GT
03-09-2008, 05:19 AM
Does the CS DP cause a CEL? Or is it the midpipe that does?
RXMmazdaspeed
03-09-2008, 08:53 AM
had the same exact problem, only i have the corksport downpipe/PG test pipe combo. i went to my local mechanic and he had piles of bolts and springs sitting around, so i just found the appropriate size and installed them there.
aaronc7
03-09-2008, 09:32 AM
cool^^!

I think the bolts they provide is designed for the stock mid pipe.

Jesse: The downpipe has all the O2 sensors....so far no CEL!
ericrapp
03-09-2008, 06:23 PM
Hey aaron about how long did it take ? to remove oem and then to install? I mean if you had the correct hardware? any tricks Thanks and report back on how shes running
aaronc7
03-09-2008, 06:26 PM
check out my new thread! in exhaust section
ericrapp
03-09-2008, 06:43 PM
done and done sir