Look at what UPS dropped off. Courtesy Of PG

[oskinosmee]

Does anyone know how much it will cost to put this on?

[junya1985]

my guess 200-300 depends on the shop and their labor rate

[dandan2]

free if u do it urself!!!

[mrlilguy157]

free if u do it urself!!!

x2

I don't know why you wouldnt.

[RXMmazdaspeed]

did mine myself... took a good portion of time but it's worth not paying 2-300 bucks.

[oskinosmee]

x2

I don't know why you wouldnt.

Is it easy? i know taking off the o2 sensor is a pain. I dont have an air gun or nothing just a basic hand tool set with a few extra pieces.

[mrlilguy157]

PBblaster and PATIENCE for the 02 sensors. rent the 02 socket from autozone if you don't have one, and return it when you're done.

No air tools needed. Patience is the main theing you'll need though... :D

[aaronc7]

follow corksport's instructions and the O2 is easy to get off. I used pb blaster instead tho

[oskinosmee]

Okay maybe i will try.
Thanks Guys

[Bravnik]

I see you have it on your bed. I know it's really cool and has lots of holes and you're very excited to get it.....but man do you really need to sleep with it?

[aaronc7]

I had a threesome with the downpipe and mid pipe

[aaronc7]

Okay maybe i will try.
Thanks Guys

I haven't heard of anyone else having this problem....but I'm stuck with my install right now. One of the 10mm bolts on the back of the stock DP (heatshield) would not come loose and the head just rounded off...soo I have to cut it off or drill it off or something. Maybe I just suck but that's been my biggest difficulty lol.

[Bravnik]

I had a threesome with the downpipe and mid pipe

(idhitit)

[oskinosmee]

LOL you guys are funny

[GoFast]

thanks a lot for posting the picture, now i need a new keyboard!(bj)

[winniep]

I haven't heard of anyone else having this problem....but I'm stuck with my install right now. One of the 10mm bolts on the back of the stock DP (heatshield) would not come loose and the head just rounded off...soo I have to cut it off or drill it off or something. Maybe I just suck but that's been my biggest difficulty lol.

Mine nearly did the same. I just pb blaster it, waited about 10 mins, then actually turned my socket to tighten, but some pressure on it, then tried again to loosten it. Seemed to work and it made a loud pop when it finally busted loose. That sucker was ON there. The hardest bolts for me were not the sensors, but the DP to turbo housing bolts. Propaply more than anything because of the limited space.

[Mid_Life_Crisis]

I haven't heard of anyone else having this problem....but I'm stuck with my install right now. One of the 10mm bolts on the back of the stock DP (heatshield) would not come loose and the head just rounded off...soo I have to cut it off or drill it off or something. Maybe I just suck but that's been my biggest difficulty lol.

Carefully grind two flats back on it then soak the hell out of it with your favorite penetrating oil. I would much rather do what it takes to get that bolt out in one piece than try to drill out the remnants if you cut off the head.

[Jesse MS3GT]

Has anyone tried heating just the down pipe with a propane torch around the while not catching anything on fire?

[ericrapp]

Check How to's ASAP, that looks alot like mine!

[junya1985]

i'll lend a helping hand if you want i live in pasadena

[EngulfinFlames]

I have the trio in my basket right now in PG, Just have to call up some shops and see how much install is.

[oskinosmee]

Dps are on back order until end of march

I live in woodlawn JUNYA.

[junya1985]

Dps are on back order until end of march

I live in woodlawn JUNYA.

well once you get it all i dont mind traveling and i can try to help you never put one on before but dont mind helping

[ericrapp]

well once you get it all i dont mind traveling and i can try to help you never put one on before but dont mind helping

You maryland guys are alright helping out and stuff!

[Mspeed3]

make sure u remember how to put heatshields back on i struggled

[laracroft]

I never want to take off my manifold again. The bolts are in REALLY bad locations, hard to get to. MAM had a good design... for the most part, but the bolt locations could have been a wee bit better.

I'd try to do it yourself if you can. Rent the tools like they said, if needed. Just make sure you don't end up in a situation where you're stuck at home because you couldn't get the car back in one piece.

[oskinosmee]

Well Thanks JUNYA I got it put on today for 100 bucks and 3hours of my time. I looked like a bitch to do. All i can say is WOW its a whole different car with it on. No smoke, holds boost better and i have to say it has to be the best mod. JUNYA if you wanna ride come to I70 saturday night i will be there if you want a ride. But thanks trying to help me.

[aaronc7]

Well Thanks JUNYA I got it put on today for 100 bucks and 3hours of my time. I looked like a bitch to do. All i can say is WOW its a whole different car with it on. No smoke, holds boost better and i have to say it has to be the best mod. JUNYA if you wanna ride come to I70 saturday night i will be there if you want a ride. But thanks trying to help me.

nice cant wait to get mine done

[ericrapp]

Nice! Yea i can't wait either. Feel free to post up about the performance gains you notice, WOW is what I hoped to hear

[junya1985]

they still racing up there that at the "park and ride" right?


Well Thanks JUNYA I got it put on today for 100 bucks and 3hours of my time. I looked like a bitch to do. All i can say is WOW its a whole different car with it on. No smoke, holds boost better and i have to say it has to be the best mod. JUNYA if you wanna ride come to I70 saturday night i will be there if you want a ride. But thanks trying to help me.

[Captain KRM P5]

Well Thanks JUNYA I got it put on today for 100 bucks and 3hours of my time. I looked like a bitch to do. All i can say is WOW its a whole different car with it on. No smoke, holds boost better and i have to say it has to be the best mod. JUNYA if you wanna ride come to I70 saturday night i will be there if you want a ride. But thanks trying to help me.

good stuff, glad you like it

[xbox4414]

Not sure what your emissions laws are like but in Cali not a single shop will install a downpipe. I was sold by one show...."it's like doing drugs in a school zone in CA". I say do it your self, cheaper and your can proudly say the car is 100% built by you.

[oskinosmee]

they still racing up there that at the "park and ride" right?

Yup

[boost3]

hey i brought mine to minekie and it took them liek 2 hrs.he charged me cash 250 was gona be leik 350.i love corkspot exhaust system.just becarfull of smoking turbo with the carless system like i have.but im purchasing the new garret gt31 turbo.no more smoke