Kenwood Security Code Help

[livelyjay]

Here's the deal. My stock MSP headunit rotating assembly broke. I bought a few Kenwood radios off of the forum. I fixed the ribbon cable on one of them and put the rotating assembly off another back onto my stock unit. When I plug it in it rotates and tells me to enter the security code. I have no idea what the previous owner of my MSP set the code to. Can anyone help me out?

[MS3_KIDD]

i have always found the security code to the past few headunits iv had usually were on either the back or the sides of the unit

[livelyjay]

That's not the case here. I found a sequence on the internet involving the remote control, but both my remotes are dead. I'm going to try getting a new battery for the remote and trying that technique first.

[livelyjay]

* bump *

The remote control thing I found on the net didn't work. The screen still folds flat and asks for the security code. Any help would be greatly appreciated.

[evilmonkeyMSP]

i wasnt even aware you could set a security code lol

[livelyjay]

It's somewhere in the user manual how to set it. What they don't tell you though and for obvious reasons, is how to disable it when it has been set.