Incoming wheels for Feb. - Many different styles incoming!!

[WheelDude.com]

If you are interested in reserving any of the following wheels please send us a PM or post here

18x8 Formula Mesh - +48mm offset - $750 shipped

18x8 P1 Hyper Black - +48mm offset - $775 shipped

18x8 Torque Hyper Black - +48mm offset - $775 shipped

18x8 Torque Full Royal Sports Bronze - +48mm offset - $775 shipped

18x7.5 Tarmac 3 Full Royal Sports Bronze - +45mm offset - $750 shipped

17x7.5 Torque - Full Royal Sports Bronze - +45mm offset - $650 shipped

17x7.5 SVN - Flat Black with Red Lip - +45mm offset - $650 shipped

17x7.5 Circuit 10 - Full Royal Sports Bronze - +45mm offset - $650 shipped

Aggressive setups - Fender Rolling and Negative camber suggested:

18x8.5 G Force - Hyper Silver - +48mm offset $800 shipped

18x8.5 G Force - Charcoal Grey - +48mm offset $800 shipped



Prices including shipping to the lower 48 states.

Please add $200 if you live in Hawaii, Alaska, or Canada.

If you need pictures of any of those wheels just respond and we'll reply with a picture of them.

CA residents, please add 8.75% sales tax.

If you are picking up, prices above are valid for pick up with no additional tax being added to the total

If you'd like a quote with tires, please email us at sales@wheeldude.com with the wheel you are interested in and the type of tire you want and the size tire you'd like and we'll respond back with a quote

If you'd like to pay via paypal just mention the wheel you want and that you are from the mazda forums then paypal the total to sales@wheeldude.com

If you'd like to pay via Credit card please email us your name, address, phone #, and email address then call us at 510.651.2956 with your CC info

If you have questions before ordering please call us at 510.651.2956

We will include wheeltek lug nuts in either black or chrome with your order at no additional charge and a set of hubcentric rings if they are needed.

To get the free items please mention it when ordering, items will ONLY be included if MENTIONED WHEN ORDERING.

[TXMazdaSpeeder]

can i see the 17 x7.5 full royal torques?

[WheelDude.com]

can i see the 17 x7.5 full royal torques?

http://www.wheeldude.com/gallery2/d/4072-10/torque18x8_frsb_01.jpg

[bstdtimsp]

those are hawt(wow)

[K. Soze]

May I see pictures of the Formula Mesh in gunmetal (or hyper black) and silver?

Thank you.

[TXMazdaSpeeder]

its to my understanding that some rotas have to have the hub machined in order to fit proteges... if this is the case do these prices include the machining of the hub?

[BlueWolfCry]

What is hub matching?

[WheelDude.com]

May I see pictures of the Formula Mesh in gunmetal (or hyper black) and silver?

Thank you.

They are actually only available in the charcoal grey for mazda

here is a picture on a car:
http://www.wheeldude.com/gallery2/d/55894-1/stiiwebib9.jpg


its to my understanding that some rotas have to have the hub machined in order to fit proteges... if this is the case do these prices include the machining of the hub?

Everything we list here will work on your car.

Everything we order from this point forward will have a hubbore compatible with Mazda 3's, if you purchase through us, the wheels are guaranteed to fit over the hub :)


What is hub matching?

Some of the wheels we produced in the past had a smaller hubbore (56.1), which was not compatible with mazdas, all wheels ordered through wheeldude now have a 67.1 or higher hubbore, which is compatible with all mazdas

-Zoeb

[K. Soze]

Damn those look good. What size are those? Do you have any other pics of them?

[WheelDude.com]

Damn those look good. What size are those? Do you have any other pics of them?

18x8, we'll take some more pix when they come in

-Zoeb

[justanothermp5]

omg those are incredibley sexy buy those now k soze

oh and could i see the flat black with the red lip svn's?

[WheelDude.com]

omg those are incredibley sexy buy those now k soze

oh and could i see the flat black with the red lip svn's?

http://www.wheeldude.com/gallery2/d/39654-5/rota_svn_18x9_5x120_e35_72_6_fbrl_02.jpg

[Pirana]

OMG I just wet my pants! Mmm, how about a sponsorship, (naughty)

[iceman11787]

wow SVNs are hot but will 18x8.5 fit these cars?

[WheelDude.com]

wow SVNs are hot but will 18x8.5 fit these cars?

He was asking about 17x7.5.

17x7.5 SVN - Flat Black with Red Lip - +45mm offset - $650 shipped

[iceman11787]

o you dont have 18" SVNs?

prefferably gold?

[justanothermp5]

wow those svn's are pretty nice, pretty good price too
and u wanna give me a sponsorship, and not pirana cuz he already had so many lol

[WheelDude.com]

o you dont have 18" SVNs?

prefferably gold?

Not in 18x8 or 18x7.5

just 18x8.5 and bigger

I have seen people run an 18x8.5 on a mazda 3...it needs aggressive camber and rolled fenders, but it looks really nice when its done :)

[iceman11787]

ya id love to get a set but i have an hour drive to work and lots of camber will kill me in tires

[WheelDude.com]

You might be able to get away with just rolled fenders

[iceman11787]

Not in 18x8 or 18x7.5

just 18x8.5 and bigger

I have seen people run an 18x8.5 on a mazda 3...it needs aggressive camber and rolled fenders, but it looks really nice when its done :)

got any pics? i will also be going for the slammed look so i know im gunna be rubbing, just how much i dont know ha! this also wont be happening in the near future so i will be looking here and on your site for updates.

and thanx for the prompt responses, much appreciated.

[Dinos Speed6]

18x8 Rota Torques in gunmetal? I have been wanting to get those or a long long time now.

[WheelDude.com]

got any pics? i will also be going for the slammed look so i know im gunna be rubbing, just how much i dont know ha! this also wont be happening in the near future so i will be looking here and on your site for updates.

and thanx for the prompt responses, much appreciated.

Nope, but i'll ask the customer who did it if he has any and i'll be sure to post if he has them


18x8 Rota Torques in gunmetal? I have been wanting to get those or a long long time now.

unfortunately not

just hyper black and bronze at this time

-ZOeb

[K. Soze]

Do you think you guys would be able to get the Tarmac 3 in charcoal grey?? Do they only offer that color in +35 offset? If so, that's pretty odd.

[WheelDude.com]

Do you think you guys would be able to get the Tarmac 3 in charcoal grey?? Do they only offer that color in +35 offset? If so, that's pretty odd.

Hey

It was only ordered in evo fitment (+35mm offset)

Unfortunately it is not available in mazda fitment in charcoal grey.

I can get steel grey for you though for $850 shipped (i'd have to machine the centers for you on them)

-Zoeb

[bboy-dumb]

do you happen to have any of the 17 x7.5 full royal torques in white?

[WheelDude.com]

do you happen to have any of the 17 x7.5 full royal torques in white?

theres no such thing as a full royal white

we do have white 17x7.5 Torques in stock though

$650 shipped

let me know

-Zoeb

[justanothermp5]

hey man i was wondering if i could get a price quote on the rota d2's shipped to 28356
17x7 or 7.5 w/e u have with like 42 offset thanks
and could u post what colors u offer those in
last question, if i was to buy these how would i do that?

[zpeedfreak]

Not in 18x8 or 18x7.5

just 18x8.5 and bigger

I have seen people run an 18x8.5 on a mazda 3...it needs aggressive camber and rolled fenders, but it looks really nice when its done :)

you should make a 18 x8 order :(

[WheelDude.com]

hey man i was wondering if i could get a price quote on the rota d2's shipped to 28356
17x7 or 7.5 w/e u have with like 42 offset thanks
and could u post what colors u offer those in
last question, if i was to buy these how would i do that?

I only have a +48 or a +35...the 48 might have caliper clearance issues though


you should make a 18 x8 order :(

That would be a new mold unfortunately.

I sent an email to the manufacture asking them if they plan to do it though, i'll keep you guys updated

-Zoeb

[Marcus]

OMG! Those SVN black w/ red lip look amazing! I can hear my credit card in my wallet begging to be used

[WheelDude.com]

OMG! Those SVN black w/ red lip look amazing! I can hear my credit card in my wallet begging to be used

so can we (glare)

[Koenig]

ya know I was checking out your site when I came across some Linea Corse Strasse (I believe that's what it was).... might heart kinda sank after I read they're only in 18x8.5 and 19x8.5 with no 8 inch width.... plus a +35mm offset makes me think I'd have serious rubbing issues on my speed6 :(

[WheelDude.com]

ya know I was checking out your site when I came across some Linea Corse Strasse (I believe that's what it was).... might heart kinda sank after I read they're only in 18x8.5 and 19x8.5 with no 8 inch width.... plus a +35mm offset makes me think I'd have serious rubbing issues on my speed6 :(

yea, unfortunately smaller sizes aren't available for these

smallest size in your bolt pattern would be 19x8.5 +30mm offset and we cannot special order anything else unfortunately on these

-Zoeb

[Koenig]

yea, unfortunately smaller sizes aren't available for these

smallest size in your bolt pattern would be 19x8.5 +30mm offset and we cannot special order anything else unfortunately on these

-Zoeb

+30? geez I thought the smallest size for 5x114.3 would have been the 18x8.5 with the +35mm offset :(

[WheelDude.com]

+30? geez I thought the smallest size for 5x114.3 would have been the 18x8.5 with the +35mm offset :(

that's a 5x120

-Zoeb

[Koenig]

that's a 5x120

-Zoeb

CRAP... alright thanks man I guess I'm gonna have to look around at the other stuff you have, I just REALLY liked those rims :'((braindead

[Marcus]

I'm pretty sure I can make the 18x8.5 48et SVN work on my 6 whats the price on those?

[WheelDude.com]

I'm pretty sure I can make the 18x8.5 48et SVN work on my 6 whats the price on those?

$800 shipped

-Zoeb

[thabigo]

http://www.wheeldude.com/gallery2/d/39654-5/rota_svn_18x9_5x120_e35_72_6_fbrl_02.jpg

Do you have these with Chrome Lip!?!

[WheelDude.com]

Do you have these with Chrome Lip!?!

unfortunately not

[Koenig]

What about in a white lip? anything other than the red.


Or do they happen to come in gold/bronze?

[WheelDude.com]

What about in a white lip? anything other than the red.


Or do they happen to come in gold/bronze?

They are available in bronze in 17"

-Zoeb

[Koenig]

They are available in bronze in 17"

-Zoeb

So there's no way for me to get 18"? :( Crap I really want some nice bronze to go with the Black Cherry(2thumbs)

[v0ice]

There's a way. Powder coat 'em.

[Koenig]

There's a way. Powder coat 'em.

He said they were only 17, I assume the black ones are 17 as well, no?

[numbnuts22715]

any chance that you could get 17X8 Rota torques? If not, what all rotas can you get in 17 X 8 in an offset that wouldnt rub on a Mazdaspeed3.

and coudl you please pm me? I may forget about this thread.

[drledford93]

Can you give weights for the Rota SDX and the SVN in 17x7.5"? Thanks!

[EDM6-zoom zoom]

17x7.5 Circuit 10 - Full Royal Sports Bronze - +45mm offset
Can i see a pic of these on a car? Thank you.
Also what other color do you have?

[WheelDude.com]

any chance that you could get 17X8 Rota torques? If not, what all rotas can you get in 17 X 8 in an offset that wouldnt rub on a Mazdaspeed3.

and coudl you please pm me? I may forget about this thread.

http://www.mazdas247.com/forum/showthread.php?t=123696175


Can you give weights for the Rota SDX and the SVN in 17x7.5"? Thanks!

16.5 on the SDX, 18 on the SVN


17x7.5 Circuit 10 - Full Royal Sports Bronze - +45mm offset
Can i see a pic of these on a car? Thank you.
Also what other color do you have?

Unfortunately we do not have any pictures of these on a car

that is the only color available

-Zoeb

[drledford93]

16.5 on the SDX, 18 on the SVN

Do you have these in stock in either bronze or flat black? I'll be looking to buy in the next month or two...(drinks)

Daniel

[WheelDude.com]

Do you have these in stock in either bronze or flat black? I'll be looking to buy in the next month or two...(drinks)

Daniel

we have bronze right now

however, stock changed significantly within a month or 2.

shoot us a PM when you are ready and we'll let you know what we have for you at that point

-Zoeb

[Koenig]

Maybe I'm looking around the website wrong but uh........ Do you have anything in bronze that fits the mazdaspeed6 in 18" sizes? :(

When I go to look at the mazda6 and 18" wheels...... they're mostly gun metal-ish

[WheelDude.com]

Maybe I'm looking around the website wrong but uh........ Do you have anything in bronze that fits the mazdaspeed6 in 18" sizes? :(

When I go to look at the mazda6 and 18" wheels...... they're mostly gun metal-ish

oops, I hit edit

I have Torques in 18x8 in the full royal sports bronze +48mm offset

Let me know, I only have 2 sets left!! :)

[Koenig]

oops, I hit edit

I have Torques in 18x8 in the full royal sports bronze +48mm offset

Let me know, I only have 2 sets left!! :)

Damn I was out of town, is there a picture of them on the website somewhere that I could see how they look in the "full royal sports" bronze?

[essejkcamraw]

sdx's 17x7.5 flat black redlip i will be getting a set from you very very soooooon!(yes) are these in stock?

[WheelDude.com]

sdx's 17x7.5 flat black redlip i will be getting a set from you very very soooooon!(yes) are these in stock?

yup, in stock! :)

[essejkcamraw]

yup, in stock! :)



any deals on the 17x7.5 sdxs with the falken ziex ze912s? im thinking some new shoes and wheels would be niceee

[WheelDude.com]

any deals on the 17x7.5 sdxs with the falken ziex ze912s? im thinking some new shoes and wheels would be niceee

PM sent

[Yoo Shin]

They are actually only available in the charcoal grey for mazda

here is a picture on a car:
http://www.wheeldude.com/gallery2/d/55894-1/stiiwebib9.jpg


-Zoeb

Are the Formula Mesh still available and if so still only charcoal grey? I read over on NASIOC that they're being discontinued :(

[WheelDude.com]

Are the Formula Mesh still available and if so still only charcoal grey? I read over on NASIOC that they're being discontinued :(

who said they were being discontinued?

we have them available in the steel grey

-Zoeb

[sl0wthe0ry]

would the formula mesh in 18" fit my mazda3 hatch? given i have a 2.0" drop in the front and 1.8" drop in the rear.

[WheelDude.com]

would the formula mesh in 18" fit my mazda3 hatch? given i have a 2.0" drop in the front and 1.8" drop in the rear.

yes, that will fit great :)

I suggest a 225/40/18 tire for optimal fitment

-Zoeb

[Yoo Shin]

who said they were being discontinued?

we have them available in the steel grey

-Zoeb

I guess just another nasty NASIOC rumor. Anyways, I understand you have some Rota SVN in 18x8.5 with mazda bore and actually mentioned over on NASIOC that you have them in one or two colors. I'm getting my fenders rolled in the next week or so in anticipation for a wider wheel/tire, and was wondering if the Sport Bronze or Gun Metalic were still available.

[WheelDude.com]

I guess just another nasty NASIOC rumor. Anyways, I understand you have some Rota SVN in 18x8.5 with mazda bore and actually mentioned over on NASIOC that you have them in one or two colors. I'm getting my fenders rolled in the next week or so in anticipation for a wider wheel/tire, and was wondering if the Sport Bronze or Gun Metalic were still available.

I have Bronze coming in on July 4th, but not much coming in so let me know asap

-Zoeb