Boost guage setup...

[VRMS6]

Im looking to replicate this setup (from a Speed3) on my Speed6...
http://i4.ebayimg.com/01/i/000/d0/f2/fd6a_12.JPG
It looks totaly OEM install with the greddy guage...Anyone know of a mount like this avail for the vent on a Speed6??

[Dr. D]

122939

gonna fill in the rest of them eventually

[ForceFed]

Its homemade..not bought..do a search on it..there is a basic how to around here somewhere.

[VRMS6]

Dr. D that looks good but Id like it to look a bit more intergrated like in the pic I posted...

Forcefed got a link??

[bova80]

how about like this.
http://users.adelphia.net/~bova80/interior4.jpg

[VRMS6]

Bova that looks good....Now if I could replicate that setup on my drivers side vent....

[Killer]

gonna fill in the rest of them eventually

and what about the A/C?

[VRMS6]

Id have the center vents for that. The drivers side vent is closed most of the time anyway on my car....

[bova80]

he was talking about Dr.D's statement to fill them all.

[Dr. D]

and what about the A/C?

got the two on the side besides i hate runnin a/c anyways

[Mazdaspeedguy]

Here is mine

http://img.photobucket.com/albums/v248/240FOWLR/gaugepod009.jpg

[Powerslave]

Here is mine

http://img.photobucket.com/albums/v248/240FOWLR/gaugepod009.jpg

this is the best look at the a/f guage, sweeeet

[VRMS6]

Here is mine

http://img.photobucket.com/albums/v248/240FOWLR/gaugepod009.jpg

Any info on the center guage setup?? Parts usedfor the trim ring,guage size?? Write up on install???

[baseballd2]

How does the air to fuel ratio gauge get hooked up, into the ecu? or off the maf sensor or something ?

[Mazdaspeedguy]

Gauge size is 52mm hence the ring around the outside. I had my shop install it for me they made up the custom ring around it. The AFG gets hooked to a separate wide band o2 sensor in my DP. I had to have an extra bung welded on to it for this to work.

[mrlilguy157]

gorgeous.

[VRMS6]

Bet they can sell quite a few of those rings if they had more...Id be first in line for one....

[Mazdaspeedguy]

I will post my shops contact info for those interested.

My name is Rob mention the AFR ring:

Jackson AutoSport
Phone 204-235-1123
jacsport@jacsport.com

[VRMS6]

just put a call in ...thanks...

[VRMS6]

Rob
Spoke to your installer and he says he will need your car there to get measurements off yours. He says your car will be there for other installs in the next few days and he will get measurements then... He may make more than one if there is sufficient intrest from other MZ6/MS6 owners....

[bova80]

i would take one if it can be cut for a 60mm gauge.

[Mazdaspeedguy]

Yes I was there today to have my front mount installed and new cobb SRI installed. I was short on time but I will have it back in the shop soon for other installs.

[LBV]

Can you still open & close that gauge pod for storage? Looks good btw.

[Dr. D]

gonna fix my shit up tomorrow and throw in EGT

[Mazdaspeedguy]

Can you still open & close that gauge pod for storage? Looks good btw.


No you can not! But I'm sure you could still make it work like that if you wanted too. It requires you remove the stock door for install of the pod.

[VRMS6]

Yes I was there today to have my front mount installed and new cobb SRI installed. I was short on time but I will have it back in the shop soon for other installs.

Hurry up n buy more stuff to get installed....;)

[Dr. D]

pics after the EGT install and re-fab of vents...

http://www.mazdas247.com/forum/showthread.php?p=3645829&posted=1#post3645829

[VRMS6]

Rob you go back yet??

[Mazdaspeedguy]

I hope to drop off the car with them this monday. They will have it for 10 days while I'm out of town.

[VRMS6]

awsome...looks like I will call them Monday.....

[VRMS6]

Rob the shop emailed me today. Pod/trim ring will be out to me in the next day or 2...Cant wait. Now to choose a gauge... Will post pics of the parts/install process once the parts arrive and I get to install it...

[Mazdaspeedguy]

Sounds good! I'm sure you will love it when you install it?

[VRMS6]

Picked up the prosport electrical boost gauge today....Cant wait to get the ring/pod and do the install...

[Dr. D]

just got the oil pressure gauge and wideband... will be installed tomorrow so i'll try to post pics asap.