CorkSport Mazdaspeed Mx5/Miata FMIC upgrade

[CorkSport]

Hello All,

We have our Mazdaspeed MX5/Miata intercooler upgrade kit available now. The retail price on the kit is $799. I have attached a few pictures of the kit.

http://www.corksport.com/content/00/01/06/61/73/userimages/Engine shot.jpg
http://www.corksport.com/content/00/01/06/61/73/userimages/front shot.jpg

[CorkSport]

I forgot to mention that we have all our intercooler kits on sale this month. The price for all kits are 10% off and free ground shipping.

Derrick

[MAZDASPEED MX5]

Whats included in the kit? I hope it's more than just the intercooler.

[CorkSport]

The kit replaces all of the piping with a 2.25 mandrel bent aluminum set. The kits is supplied with a larger intercooler, new turbo inlet pipe, and all the needed hardware. On a completely stock car you will see a gain if 12-14 hp at the wheels.

[MAZDASPEED MX5]

The air filter looks forced into the wheel well arch. Is the filter included? Inlet pipe on the manifold side? Will it work with the factory diverter?

[CorkSport]

Hello,

Our Tech was a little rough on the poor filter. The kit does come with the filter and you can use the factory divertor valve with the setup.

The kit does not replace the rubber elbow at the throttle body but it does replace the piping to it.

Derrick

PS the kit is on sale this month for $719 shipped.

[lilchild87]

The air filter looks forced into the wheel well arch. Is the filter included? Inlet pipe on the manifold side? Will it work with the factory diverter?

You can add a 45 degree pipe after the MAF so the filter will not hit the wheel arch :rolleyes:

[CorkSport]

The filter is angled so it looks a bit weird in there.