View Full Version : MSP Pocket Removal (underneath the radio)
Wingman21
11-28-2007, 11:20 PM
OK, my radio is squeeking like hell since Ive tried to remove it (must be loose or something now) so I wanna remove the pocket underneath it to put some damping, but cant figure out how to pull it out! I read some guys saying: pull hard, but even for that, you dont really have much grip except for the lowered cover and I am afraid that it will break if I use it to pull the pocket out! So any tips or way that you guys did could really help!
Thanks
jeremy1210
11-29-2007, 02:01 PM
I had the same problem with getting it out and not wanting to break anything.. What I did was take a screw driver to pop it out. if youopen the door and look at the gap b/w the radio and the pocket you will notice a gap. By the corners of the gap I put the screw driver in there and twisted it to make it pop out of place. took a bit of twisting and pulling but it came out free and easy...
Hops this helps
Wingman21
11-30-2007, 12:45 AM
I had the same problem with getting it out and not wanting to break anything.. What I did was take a screw driver to pop it out. if youopen the door and look at the gap b/w the radio and the pocket you will notice a gap. By the corners of the gap I put the screw driver in there and twisted it to make it pop out of place. took a bit of twisting and pulling but it came out free and easy...
Hops this helps
Nice Ill try that for sure the next time and will let you know :)!
Thanks a lot!
JCell
11-30-2007, 01:28 AM
just give it one quick tug and i'll come off.
if you play with it too much by not giving enough pressure then it could break
Wingman21
12-06-2007, 10:36 AM
I had the same problem with getting it out and not wanting to break anything.. What I did was take a screw driver to pop it out. if youopen the door and look at the gap b/w the radio and the pocket you will notice a gap. By the corners of the gap I put the screw driver in there and twisted it to make it pop out of place. took a bit of twisting and pulling but it came out free and easy...
Hops this helps
Worked like a charm, thanks a lot :)!
ItsSlow
12-08-2007, 07:36 PM
You could just ask the thieves that took mine out..
Wingman21
12-14-2007, 01:08 AM
You could just ask the thieves that took mine out..
Haha, Im sure he didnt care as much about the wires and the surrounding as I did ;)! Sorry for you though!
Powered by vBulletin® Version 4.1.7 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.