View Full Version : fmic which one?
edward14725
10-26-2007, 04:08 PM
i got pick from a corksports fmic and a hiboost which one should i get ? which would be the best one ?
shane02pro5
10-26-2007, 04:36 PM
They are both close to the same core size and very good quality.
junya1985
10-26-2007, 04:47 PM
24x6x3.5-corksport
22x6.5x2.5-hi boost
i would go with the corksport its a little bigger but its all your choice
kamon8404
10-26-2007, 05:08 PM
Check this out: Its going to be cheaper than both of those setups.
http://www.mazdas247.com/forum/showthread.php?t=123678740
edward14725
10-26-2007, 06:08 PM
corksports dont u have to take on your a/c fan for dat ?
edward14725
10-26-2007, 06:11 PM
24x6x3.5-corksport
22x6.5x2.5-hi boost
i would go with the corksport its a little bigger but its all your choice
dont the corksport take away your a/c fan ? dat mean no a/c
junya1985
10-26-2007, 06:25 PM
you can buy the smaller fan
junya1985
10-26-2007, 06:25 PM
i think the corksport is the same price as the hiboost once you get the smaller fan
edward14725
10-26-2007, 06:32 PM
i think the corksport is the same price as the hiboost once you get the smaller fan
so how about the mental addiction kit where can i get dat one ?
kamon8404
10-26-2007, 07:15 PM
Mental addiction is no longer a vendor ... so you won't be able to buy from them. You might want to go with a smaller kit than the MAM core because you won't be running serious boost. You will actually get better performance out of a smaller core.
If any kit takes away your stock fan you can get slimline fans that mount on the front of the radiator.
edward14725
10-26-2007, 08:03 PM
Mental addiction is no longer a vendor ... so you won't be able to buy from them. You might want to go with a smaller kit than the MAM core because you won't be running serious boost. You will actually get better performance out of a smaller core.
If any kit takes away your stock fan you can get slimline fans that mount on the front of the radiator.
is there any other good fmic out there besides does?
kamon8404
10-27-2007, 12:05 AM
is there any other good fmic out there besides does?
^ are you drunk? ^
edward14725
10-31-2007, 08:29 AM
cold pipes do they come wit the intercoolers kit and if not where can i get them at?
turbolife
10-31-2007, 08:51 AM
Check this out: Its going to be cheaper than both of those setups.
http://www.mazdas247.com/forum/showthread.php?t=123678740
Good suggestion (headbang)
edward14725
10-31-2007, 08:53 AM
Good suggestion (headbang)
well i see in dat one but is not made yet man so i was wondering if the intercooler bring the cold pipe cuz i dont think the pipes go all the way to the bak do they?
turbolife
10-31-2007, 10:36 AM
well i see in dat one but is not made yet man so i was wondering if the intercooler bring the cold pipe cuz i dont think the pipes go all the way to the bak do they?
It will be a complete kit. Hardpipes, couplers, clamps, IC, bumper support, etc, etc...
S.A.MSP
10-31-2007, 10:39 AM
are you speaking english? the suggested option will have all the piping neccesary, it's the best option and it's almost done, just hang in there
edward14725
10-31-2007, 11:15 AM
It will be a complete kit. Hardpipes, couplers, clamps, IC, bumper support, etc, etc...
so just an estimate how long will u take to finish it ?
livelyjay
10-31-2007, 01:23 PM
If you go with one that needs a new AC fan, here is a great option. Way cheaper than other ones out there and the fans last. I have one on my car right now, had one on my Lancer when it was turbo too.
SPAL 10'' Pusher Fan Straight (http://spaladvancedtechnologies.carshopinc.com/product_info.php/products_id/51064/30100374)
crashkelly
10-31-2007, 06:30 PM
yay it's another intercooler thread! it's almost been three, maybe four, seconds since the last one!
SEARCH NOOB...
S.A.MSP
10-31-2007, 06:46 PM
damn i'm glad i'm not a noob!!
edward14725
10-31-2007, 08:24 PM
so there no need for me to get a cold pipe if i get a whole intercooler kit?
kamon8404
10-31-2007, 10:50 PM
^How about you chill a little on the noob hating ^ You gotta start somewhere ...
mspHtown
11-01-2007, 12:47 AM
so there no need for me to get a cold pipe if i get a whole intercooler kit?
no. if you buy a kit, it will include everything you need.
S.A.MSP
11-01-2007, 01:22 AM
^How about you chill a little on the noob hating ^ You gotta start somewhere ...
i was a noob too, i was totally just kidding but people don't utilize the search function on this forum much
livelyjay
11-01-2007, 07:44 AM
FMIC KIT WILL INCLUDE:
Pipe from turbo to intercooler
Intercooler core
Intercooler mounting hardware
Pipe from intercooler to throttle body
All silicone couplers, clamps, and additional hardware
Installation instructions
edward14725
11-01-2007, 08:21 AM
FMIC KIT WILL INCLUDE:
Pipe from turbo to intercooler
Intercooler core
Intercooler mounting hardware
Pipe from intercooler to throttle body
All silicone couplers, clamps, and additional hardware
Installation instructions
thanks thats all i needed to know man i was lookin at the ion and corksport i see they are the same core side how many pounds should i start wit when i get either one do u know how much either one can handle?
kamon8404
11-01-2007, 08:24 AM
^ both of those kits will hold more psi than your stock block can take ...
edward14725
11-01-2007, 08:29 AM
^ both of those kits will hold more psi than your stock block can take ...
so to be safe wat should i set it up when i get it and iff i want push more that means i got change my engine block and where can i get them?
turbolife
11-01-2007, 08:31 AM
so to be safe wat should i set it up when i get it and iff i want push more that means i got change my engine block and where can i get them?
What other mods do you have?
edward14725
11-01-2007, 08:33 AM
What other mods do you have?
i got an intake right now thinkin of gettin fmic than a turbo bak idk wat to do after dat i'm kind new to this whole import thing
The rods in the MSP engine are not strong, and most people don't advise running more than 10 PSI on a stock block. Even so, you probably don't want to run 10 psi without ALL supporting mods. That means intake, exhuast, intercooler, and engine management. Personally i would wait till you've taken care of all of those supporting mods before considering upping the boost.
This has been covered alot, you should spend some time doing some reading.
Also, i'm by no means trying to be rude, but it will make it easier for everyone if you try to work on your grammar and spelling. Short hand spellings and run on sentences can be a little difficult to understand.
edward14725
11-01-2007, 08:41 AM
ok i seen people 10 psi of boost wit barely anything done to their car just a smic
livelyjay
11-01-2007, 09:13 AM
First of all, please learn how to speak English a little better and please us punctuation, like periods and commas. Second of all, before you start modding your car and destroy your engine, read the forums A LOT. The MSP is very sensitive to modding and if you screw something up you will throw a rod through the side of your block. Everything has been covered before, so please use the search button and read through the threads.
Don't up your boost AT ALL until you know what you are doing. If you want power right now, change out your exhaust. You'll find more gains from that than from most other mods that don't involve upping your boost. The stock intercooler sucks, but when you are just starting out it does it's job just fine.
edward14725
11-01-2007, 09:18 AM
First of all, please learn how to speak English a little better and please us punctuation, like periods and commas. Second of all, before you start modding your car and destroy your engine, read the forums A LOT. The MSP is very sensitive to modding and if you screw something up you will throw a rod through the side of your block. Everything has been covered before, so please use the search button and read through the threads.
Don't up your boost AT ALL until you know what you are doing. If you want power right now, change out your exhaust. You'll find more gains from that than from most other mods that don't involve upping your boost. The stock intercooler sucks, but when you are just starting out it does it's job just fine.
first of all you are here talking about learn how to talk english well not everybody is from this country smart one i find what you said a little racist.... second thats why i'm asking question to better understand the car i am doing the smart thing here... i'm new to this thats why i am asking..
Andrewsmc
11-01-2007, 09:20 AM
nvm where are you from edward, But if your coming on here to learn about your car i suggest your listen besides do all the talking and contridicting everything people are saying. and BTW dont pull the *racist* card, im sure you havent stated your race and everyone is pretty cool on the forums, so dont be a fuck head.
crashkelly
11-01-2007, 09:24 AM
first of all you are here talking about learn how to talk english well not everybody is from this country smart one i find what you said a little racist.... second thats why i'm asking question to better understand the car i am doing the smart thing here... i'm new to this thats why i am asking..
Asking you to use better English on an ENGLISH speaking forum is not racist. Just because you're not from this country doesnt mean we should accomodate you. If you have a problem having your English criticized on an English speaking forum then maybe you should try to find a forum in whatever country you are in so you do not have to use our langauge.
Secondly I wouldnt get mad or call the dude a racist because he gave you the best advice anyone could give you.
edward14725
11-01-2007, 09:29 AM
Asking you to use better English on an ENGLISH speaking forum is not racist. Just because you're not from this country doesnt mean we should accomodate you, if you have a problem having your English criticized on an English speaking forum then maybe you should try to find a forum in whatever country you are in so you do not have to use our langauge.
Secondly I wouldnt get mad or call the dude a racist because he gave you the best advice anyone could give you.
i am speaking english u dont have a problem understanding what i'm writing but as i can see everybody here are a bit of anal but is ok pal carajo cabrones ustedes los blanco no saben nada chupan me el bisho
crashkelly
11-01-2007, 09:33 AM
i am speaking english u dont have a problem understanding what i'm writing but as i can see everybody here are a bit of anal but is ok pal carajo cabrones ustedes los blanco no saben nada chupan me el bisho
I guess my spanish is better than your English. I hope some of the mods understand to that this asshole just told me to suck his dick.
Get off the forums scumbag. We dont need trash like you here.
crashkelly
11-01-2007, 09:35 AM
i am speaking english u dont have a problem understanding what i'm writing but as i can see everybody here are a bit of anal but is ok pal carajo cabrones ustedes los blanco no saben nada chupan me el bisho
and by the way even though i supposedly know nothing, at least I know more about my car than you do...you dont even know what parts come on a FMIC...start reading before you post cum dumpster.
livelyjay
11-01-2007, 09:35 AM
Insulting people in another language isn't going to get you anywhere, especially when you are asking the same people for help.
As I said before, stop posting and start using the search button. Read, read, read, and read some more. Then when you have questions you can post in the other threads, don't create a new one unless the topic has not been covered. You should probably take a look at the forum rules and FAQs as well (FAQ stands for Frequently Asked Questions).
edward14725
11-01-2007, 09:36 AM
ok i was hoping your did and all say in english proud suck my dick pieace
crashkelly
11-01-2007, 09:39 AM
ok i was hoping your did and all say in english proud suck my dick pieace
Post edited by katsmp3 because it complained a racial slur
Andrewsmc
11-01-2007, 09:41 AM
dont (poke) the idiot please... let the thread die, no need getting in trouble.
turbolife
11-01-2007, 10:31 AM
So, as far as mods...what everyone else said.
As far as insults, regarless of language...being rude doesn't get you anywhere. No one was trying to insult you, it just makes it easier to read and help you when your posts are cohesive, in paragraph form, and in easy to read English.
S.A.MSP
11-01-2007, 02:49 PM
Edward, you came way out of left field with what you said, we are trying to help you, i know first hand what too much boost does, my motor is blown right now and i had supporting mods, the motor is very fragile, this can all get very nasty as we all try to defend our honor, respect and you will be respected, deal?
LOL -- regular MSP guys, y'all should've brought this to my attention!
Thread locked, infractions given.
vBulletin® v3.8.3, Copyright ©2000-2010, Jelsoft Enterprises Ltd.