PDA

View Full Version : Dealer Visits???


jaydubz
10-15-2007, 12:44 PM
Hey there Guys I have been reading through these forums for a while and based off the information I have been reading I wanted to know how many times everyones speed 3 has been back to the dealership and at how many miles.

Feel free to state what Mazda did for you at the time aswell, I think this information would be interesting and helpful.

Let me start 656 Miles and 3 times at dealer for Clutch pedal squeak and 2nd gear grind. Currently at dealership for evaluation.
Sierra117
10-15-2007, 12:49 PM
I went in at 150miles, tire pressure sensor was on.
andrew.savage
10-15-2007, 12:58 PM
1000 miles i had my battery replaced. I left the car on overnight but i didn't tell them that. But i posted because the woman there said she has seen a couple people come in with bad batteries.



Edit: Also i'm an idiot because i didn't see you had a speed.
jaydubz
10-15-2007, 01:01 PM
Tis not a problem, all advise and data is appreciated!
mistermatt
10-15-2007, 01:30 PM
i dont remember what mileage i was at, but its only been at the dealer for the mount recall
Falconx84
10-15-2007, 02:52 PM
248 miles, groove in front brake rotor....

all other trips are reg recalls
jaydubz
10-15-2007, 03:06 PM
248 miles, groove in front brake rotor....

all other trips are reg recalls


How did you know you had a groove in your brake rotor, were they any sounds or behaviors befor you brought it in to the dealer?
Falconx84
10-15-2007, 03:10 PM
I looked at it......

washing the car, looked through the rim, saw the groove. It's normal for marks to be on the brake rotor, but run your fingernail accross it and see if it catches. if it doesn't catch, you're ok-- ended up having debris on the pad, something from factory i guess
jaydubz
10-15-2007, 03:27 PM
I looked at it......

washing the car, looked through the rim, saw the groove. It's normal for marks to be on the brake rotor, but run your fingernail accross it and see if it catches. if it doesn't catch, you're ok-- ended up having debris on the pad, something from factory i guess

Ok, so no audible noises you were just lucky to spot it. I was looking for a possible reason for the winding noise I experienced this weekend.
///M Compact
10-15-2007, 09:51 PM
Only one visit to the dealer so far- at 4800 for the 5000 mile service. They performed the shutter valve actuator/pcm reflash emissions recall while I was there. No problems to report so far...
ALIEN3T
10-15-2007, 10:42 PM
1st visit 5000 miles oil change
2nd visit around 7400 miles mount recall
3rd visit 10,000 miles oil change
4th visit new ECm recalls
i have 11,000 mile snow.
only winding nois i had was aroudn the time the turbo was spolling. But nothign high pitched or anything.
mazdaspeed32007
10-16-2007, 08:06 AM
mount recall at 3000 and the other recalls at 10000. my cel came on randomly before i wentin for the recalls but as sson as i did they shut it off performed the recalls and it went away. also i get some noise from my throw outb earing now and again. been a problem since day 1 but they say its ok......we'll see in another 10k