HID Help!

[Sspring89]

just got the DDM kit from xenon expert and i hooked it up but it wont work, i have some pics attached. Can anyone see if this is correct or not?

http://i80.photobucket.com/albums/j195/Magusownz/Picture002-3.jpg

http://i80.photobucket.com/albums/j195/Magusownz/Picture001-5.jpg

[Jeph]

If you wire them straight to the battery do they work?

[Sspring89]

then they'd be on all the time, it says your just supposed to connect them to the stock connector for the halogen h4's.

[Jeph]

no no no if you wire them straight to the battery, does the HID light work. i'm not retarded i know you aren't going to wire them straight to the battery. I'm trying to find out if its a wiring problem or a ballast/ignitor problem

[Sspring89]

Yeah they do light up when connected straight to the battery. ^

[Sspring89]

oh and sry, i didn't think you were dumb or anything, you have like 5k posts... i figured your knowledgeable.

[Sspring89]

bump

[blazinrola80]

try playing with the wires chek 4 a blown fues.. mine only work on high beam..

[Sspring89]

i tried every configureation and checked all fuses... i think im gonna try splicing the wires behind the connector and seeing if that works out... i PM'ed Xenon expert to see what he has to say. any and all other help would be greatly appreciated though

[StreetStyleJPTI]

I have an HID kit in my MSP. However, when I had one in my SPEC-V, I had to take the negative and positive wires that go into the headlight plug and reverse them.

[Sspring89]

mourning bump

[mp5_tunerx]

hmm...brb ill go check my car...its teh same setup

EDIT : nvm...mine arent the same...try switching it around?

[spd_dvl]

Swap the wires around. Reverse the power flow.

[tacio25]

I had the same problem when I installed mine. I noticed that you used the 2 outer plugs when connecting the wires from the bulb to the ballast connector. But on my kit I had to use the top middle plug which just happened to be the ground. And then just move the other wire from the left or right one. One side will only work with the brights on, the with the regular headlight settings. I hope this helped you out!

[Sspring89]

i actually got it to work, you need to have the ground on the top middle plug (black wire) and then the posotive on the right side of the plug (blue wire) they started right the **** up... lol looks sick too, i'll try to get some pics if anyones interested.

[tacio25]

good! Pics!!!