Has Any Body got pictures of CAI install

[MS38449]

Do any of you people have any pictures of the removal of the front end/front bumper. I hate to do this blind.

OR... would it be just as easy just to cut a hole in the plastic and put the filter on the way we had to with the MSP?(dunno)

[numbnuts22715]

I believe Injen has instructions somewhere. I believe somebody posted a link to them a few days ago.. Check their site.
If I find it, I'll post a link.

[MS38449]

Yea I have the install booklet and it says to remove 13-6mm bolts and 5 plastic clips and they show a picture with some holding the bumper just in front of the car, Thst's All Folk's.

Oh, thank's anyway.

[controlo]

don't take the bumper off. you don't need to. you can get to the rest of the bolts through the lower front grill.

i took mine off and it was super irritating.

not to mention, now i need to re-align it.

[AllLostThings]

Take off the driver side front wheel adn work around the corner and through the grill. That's how I and a few other members have installed ours.

[staples187]

Take off the driver side front wheel adn work around the corner and through the grill. That's how I and a few other members have installed ours.

+ 1

[dkswim]

mazdaspeed CAI install says through the wheel well.its not that bad as it looks use extensions and you have to break one clip to remove the shielding. its easy. its a 1 hour install if. if you need written instructions on how to pm me and the i can write them up when i get home from work. what model are you?

[ZZZOOM!]

A little late but here is a link for Injens instructions. Still not much help with bumper removal.
http://www.injen.com/galleries/products/41220071305SP6062_hd.pdf