protegeric
09-13-2007, 12:00 AM
Unichip in perfect working order. Icludes EVERYTHING needed. The unit is in great condition. Includes Unichip electronic boost controller, but I never used it. I used my GReddy PRofec EBC. So, I don`t know much about the Unichip boost controller I have. Hooking it up is just two wires though and detailed instructions can be found here: http://www.mazdas247.com/forum/showpost.php?p=3394449&postcount=2. This Unichip has never been retuned, it has the stock Unichip original tune on it. BUT, whether you`re stock or have every bolt-on imaginable the Unichip will work. I used it stock and with 3" turbo-back, CAI, etc. Made a big difference... And of course, PLUG-AND-PLAY, ANYONE can install it in less than an hour, no splicing/soldering, etc.
The unit and boost controller can be turned on and off through the flick of a switch that is attached to the Unichip wiring harness, so you can switch back to stock ECU control or lower/increase boost a the flick of a switch. There is also another switch to advance timing for race gas = buncha extra HP with the flick of a switch + race gas. All switches are attached to the Unichip harness (never cut) and labeled.
The wiring harness is not cut up, only the wires to run under the hood for the EBC have been cut to allow installation of the EBC by the previous owner. He told me the EBC was working on his car, but I have not tested it.
$450 shipped.
The unit and boost controller can be turned on and off through the flick of a switch that is attached to the Unichip wiring harness, so you can switch back to stock ECU control or lower/increase boost a the flick of a switch. There is also another switch to advance timing for race gas = buncha extra HP with the flick of a switch + race gas. All switches are attached to the Unichip harness (never cut) and labeled.
The wiring harness is not cut up, only the wires to run under the hood for the EBC have been cut to allow installation of the EBC by the previous owner. He told me the EBC was working on his car, but I have not tested it.
$450 shipped.