PDA

View Full Version : Part Number for Brake Wire Springs


FoCaL
08-15-2007, 09:32 AM
Hoping someone has the part number for the wire springs used on our front brakes. Circled in the attached picture, I apprecaite everyones help.
njaremka
08-15-2007, 09:59 AM
there is no separate Mazda part number for those things, but you should be able to go to the auto parts store and get a "front brake hardware kit" which should include them.
FoCaL
08-15-2007, 10:47 AM
That sucks was hoping this would be easy. Though, thanks for the info, Ill give it a shot.
blue-sun
08-25-2007, 12:12 PM
ah, brake wire spring. . .that's what just came loose on mine. .ugh
peajay
08-25-2007, 01:15 PM
at least around here the only way to get the springs are to get a set of oe pads. i tried napa and carquest and many other brands to try and find springs that fit our pads to no luck.
so im just running without em.
FoCaL
08-27-2007, 10:37 AM
I haven’t had a chance to check my local auto parts store, but your post doesn’t make it look very promising for me. I am also not running with them at the moment, and have EBC Green Stuff pads and I am experiencing a ton of noise coming from my brakes, both in stopping scenarios and normal driving. Very annoying to say, pull through a drive through, and the noise bounces of the wall. I can only imagine what a car next to me on the road hears. Your sig say's full EBC brakes, so I wonder if you have the same issue or not.

Anyway, Im still looking for a way to get these, if I find a way Ill be sure to post here.
njaremka
08-27-2007, 11:04 AM
good gawd - your parts store guys must really suck - its Raybestos part number H15753

go here: http://www.partsamerica.com
and search for that part number
peajay
08-27-2007, 12:10 PM
nice!
Pmpkinhead
08-27-2007, 12:40 PM
You are correct. Here is a post from my old thread.

"The dealer said the girl in parts ordered the full kit for the front (with hardware) and the pad only kit for the rear (no hardware).(bang) I do recommend new hardware and a lot of grease on everything except the rotor and face of the pad."

Front w/ hardware: CBY3-33-23Z
Front w/o hardware: CBY3-33-28Z

Rear w/ hardware: GGYB-26-43Z
Rear w/o hardware: GGYB-26-48Z

367 (mp3yellow

I paid about $180.00 after 10% off!



http://www.mazdas247.com/forum/showthread.php?t=123626282