TWM MazdaSpeed 3 Short Shifter Pre Order! [Archive]

TWM Performance

08-03-2007, 04:41 PM

Hi Guys,

TWM is pleased to announce that we have recently completed final testing of the MazdaSpeed 3 short shifter (http://www.twmperformance.com/shortshifters/mazdashortshifters/mazdaspeed3shortshifters.htm), and are now taking pre-orders. We have started our first production run, and we will be able to ship out all pre-orders on August 30th, 2007.

The specs for the short shifter are as follows:

-30% throw reduction
-1.75” shift knob height reduction
-Compatible with stock shift knob or Upgrade to a TWM Weighted Shift Knob (http://www.twmshiftknobs.com/)
-Available with optional aluminum shifter base bushings
-Very simple installation, no modification of stock parts required
-Retains reverse lock

http://www.twmperformance.com/shortshifters/mazdashortshifters/images/speed3-shifter.gif

We have designed the MazdaSpeed 3 short shifter (http://www.twmperformance.com/shortshifters/mazdashortshifters/mazdaspeed3shortshifters.htm) with a reduced shift knob height, as well as a re-positioned pivot point for optimal shift feel and throw reduction. This is a true short shifter which reduces both shift knob height and angular throw, not just a “chopped off” version of the stock shifter. The short shifter is fully CNC machined from billet steel and is a complete replacement for the stock shifter shaft. The shifter also features a lifetime warranty as is the case with all of our products. The installation is very straight forward and does not require any modification of stock components. Simply remove the stock shifter and replace with the TWM short shifter (http://www.twmperformance.com/shortshifters/mazdashortshifters/mazdaspeed3shortshifters.htm), typical installation time is approximately 45 minutes to an hour.

The short shifter (http://www.twmperformance.com/shortshifters/mazdashortshifters/mazdaspeed3shortshifters.htm) retails for $224.95 without shifter base bushings, or $244.90 with shifter base bushings.

The optional shifter base bushings provide a more solid contact point between the shift assembly and lower mounting point to remove unwanted flex from the shift assembly. These bushings retail for $24.95 plus shipping when purchased alone, however they can be added for only $19.95 when purchased together with the short shifter.

Here is a picture of the short shifter installed with the stock shift knob, our weighted stainless steel shift knobs are also all compatible with the short shifter:

http://www.twmperformance.com/shortshifters/mazdashortshifters/images/twm-msp3-ss.jpg

And it is available for pre-order here: Mazda Speed 3 Short Shifter (http://www.twmperformance.com/shortshifters/mazdashortshifters/mazdaspeed3shortshifters.htm)

Please contact us at sales@twmperformance.com for any questions you may have, or if you prefer to place your order by phone please call us toll free at 1-877-655-0540.

Thank you,

Kevin
TWM Performance

Hatchd

08-04-2007, 04:53 AM

Is it suitable for RHD ??

lebox97

08-04-2007, 09:28 AM

they have an "Axela" shifter on their website if that helps.

Is it suitable for RHD ??

jam_asian85

08-04-2007, 12:34 PM

they have an "Axela" shifter on their website if that helps.

The Axela short shifter wouldnt work for him, cause its for a regular mazda3, which means it only for 5 speed; eventhough he has a RHD, he has a speed3.

Abaddon

08-04-2007, 12:45 PM

Why is this one so much more expensive then the one for the speed6 ???

jhowey

08-04-2007, 01:17 PM

What is RHD?

jam_asian85

08-04-2007, 01:26 PM

What is RHD?

RHD = right hand drive

Why is this one so much more expensive then the one for the speed6 ???

Thats a very good question, hmmmmmm ... (dunno)

BLACKMS3

08-04-2007, 01:26 PM

Right Hand Drive = Euro/Asia Type Stuff

lebox97

08-04-2007, 07:03 PM

thought Axela is the speed3 outside of north america? (scratch)

The Axela short shifter wouldnt work for him, cause its for a regular mazda3, which means it only for 5 speed; eventhough he has a RHD, he has a speed3.

jam_asian85

08-04-2007, 07:33 PM

thought Axela is the speed3 outside of north america? (scratch)

I didnt read the entire post but according to the first paragraph, the mazda axela is known as the regular mazda3, while the mazdaspeed axela is the mazdaspeed3.

http://www.japancorp.net/Article.asp?Art_ID=12643

clos561

08-05-2007, 12:29 AM

I didnt read the entire post but according to the first paragraph, the mazda axela is known as the regular mazda3, while the mazdaspeed axela is the mazdaspeed3.

http://www.japancorp.net/Article.asp?Art_ID=12643

isnt it the mps axela for the mazdaspeed3?

hashboogie

08-05-2007, 01:12 AM

isnt it the mps axela for the mazdaspeed3?

Nope. Mazda3 MPS in europe and Mazdaspeed Axela in Japan.

clos561

08-05-2007, 11:49 AM

o alright, shifter looks nice

TWM Performance

08-07-2007, 02:10 PM

Is it suitable for RHD ??

We have a customer in Australia lined up to test the shifter in his RHD MazdaSpeed 3 as soon as the production run is complete so I'll know more at the end of August. For the time being if you have a RHD I would hold off ordering until we can confirm fitment. I have seen the RHD shift assembly and it is identical right down to the part number, however I would prefer to give you a definite yes or no when I have confirmation from our Australian test car.

Contact me toward the end of August or beginning of September and I will be able to confirm if it fits OK.

Thanks,

Kevin
TWM

TWM Performance

08-07-2007, 02:16 PM

Why is this one so much more expensive then the one for the speed6 ???

I just PM'd you Abaddon, but this is a question we're getting quite a bit so I'll go ahead and post basically what I sent you:

The MazdaSpeed 3 short shifter (http://www.twmperformance.com/shortshifters/mazdashortshifters/mazdaspeed3shortshifters.htm) is more expensive than other short shifters we manufacture because of it's complexity, mainly due to the reverse lock since it is a 6 speed.

For example, the MazdaSpeed 6 short shifter consists simply of an adapter plate and the top portion of the shaft, and the regular Mazda 3 short shifter consists of a pivot ball, shaft and laser cut plate. The MazdaSpeed 3 short shifter consists of the entire shifter mechanism comprised of the main pivot ball and side arm, main body of the reverse lock cylinder, several machined delrin bushings, the reverse lock spring, reverse lock guide pin, laser cut and CNC bent plate, and the upper shaft which slides in and out of the main body of the reverse lock cylinder.

The complexity of the short shifter and additional moving parts are the factors which contribute to the additional cost. Most short shifters we manufacture are relatively simple machined shafts, pivot balls, and laser cut plates but the Speed 3 short shifter has a great deal more CNC machining time involved due to the reverse lock.

I hope this answers you questions, please let me know if you have any additional questions or concerns.

Thanks,
Kevin
TWM

Sorax

08-07-2007, 02:49 PM

I had already placed my order when I noticed the Speed6 price, so I appreciate the explanation. Thanks for all the hard work, I can't wait to receive another package from Quebec http://planetsmilies.net/grinning-smiley-9528.gif (http://planetsmilies.net)

dogfishhead

08-07-2007, 05:39 PM

do you suggest self installation, or is it a little tricky or risky? what shift knobs do people prefer, abrams or leopard?

Mochiman

08-08-2007, 11:50 PM

it should be pretty easy to install. the aluminum shifter bushings were really easy to install.

Abaddon

08-09-2007, 12:02 AM

it should be pretty easy to install. the aluminum shifter bushings were really easy to install.

+1

TWM Performance

08-09-2007, 10:43 AM

do you suggest self installation, or is it a little tricky or risky? what shift knobs do people prefer, abrams or leopard?

I would suggest self installation for the MazdaSpeed 3 short shifter (http://www.twmperformance.com/shortshifters/mazdashortshifters/mazdaspeed3shortshifters.htm), unless you're really not comfortable with working on your car or don't have screwdrivers and a ratchet and socket set. Also, doing the install with an assistant helps. Even if it's someone who is not too handy, there is one step where it helps to have someone who can pull up on the shifter while the other relieves the tension on the spring which controls side to side movement.

Overall the install is very straight forward, it's always a treat to work on Mazdas. This install is no more difficult than the install for our regular Mazda 3 short shifter, in fact the procedure is virtually identical. I plan to have the manual done by mid next week and I'll have a link posted from the short shifter page on our website.

As for the shift knob, it's always a matter of personal preference but here's a pic of each shift knob you mentioned installed to give you a better idea of what they look like:

http://www.twmperformance.com/banners/images/leopard-msp3.jpg

http://www.twmperformance.com/banners/images/abrams-msp3.jpg

Thanks,

Kevin
TWM

ATK

08-09-2007, 10:47 AM

The shifter boot does not look altered....is this right?

TWM Performance

08-09-2007, 11:01 AM

The shifter boot does not look altered....is this right?

That's right, this is the stock boot. We're having a prototype shorter shift boot made as we speak, hopefully the turnaround is not too long.

Kevin
TWM

Abaddon

08-09-2007, 11:31 AM

Speaking of shifter boots..

Lets say, for example, that you know someone who is really good at sewing (read: mom)... Wouldn't it be possible to alter the stock shift boot to properly fit the altered height?

dogfishhead

08-09-2007, 12:38 PM

thanks i think the abrams looks a lot better

Red MS3 n NyC

08-09-2007, 04:14 PM

I might be down for this.

TWM...I've dealt with you guys before in the Spec-V community and you guys have really nice products. Good to see you on the Mazda-side of things as well. Look forward to doing business again.

-Brian

Ferdball

08-09-2007, 07:14 PM

Wow, that is short! Is there any option for getting this without lowering the height?

dogfishhead

08-09-2007, 08:19 PM

i think the lower the better

TWM Performance

08-10-2007, 11:30 AM

TWM Performance

08-10-2007, 11:34 AM

Wow, that is short! Is there any option for getting this without lowering the height?

Unfortunately not, our current production run is for the MazdaSpeed 3 short shifter (http://www.twmperformance.com/shortshifters/mazdashortshifters/mazdaspeed3shortshifters.htm) with the 1.75" inch height reduction. I really like the lower height, it isn't as extreme as our regular Mazda 3 short shifter at a 2.5" inch height reduction, but I find at a 1.75" reduction it looks good and feels great.

Kevin
TWM

CTGrey02

08-14-2007, 10:29 AM

TWM Performance

08-16-2007, 11:29 AM

No offense, but the focus shifters have reverse lock outs as well and are about 100 dollars cheaper, and made of thicker metal to boot. I'll have to check someones out when they buy one around here, but thats not what I was expecting.

The main body of the Ford Focus short shifters are generally made out of aluminum which is much cheaper to machine. There are also a lot of Focuses on the road so the cost of development is spread across the expected number of shifters the company expects to sell, and the product has been on the market for quite some time now. The MazdaSpeed 3 on the other hand is relatively rare when compared to other cars so the potential market is much smaller, leading to development costs being spread across fewer parts.

Many of the Focus short shifters are made overseas in China and India, however all of TWM's materials are purchased in the US and machined in Canada leading to a higher cost to manufacture. We feel that keeping production in North America is important not only for the local economy, but it also ensures very tight quality control and fast turn around. Quality is our top priority, and we're proud to be one of the few remaining aftermarket companies who still manufacture in North America.

I hope this clarifies a little why the MazdaSpeed 3 short shifter (http://www.twmperformance.com/shortshifters/mazdashortshifters/mazdaspeed3shortshifters.htm) is more expensive than shifters for some other vehicles on the market.

Thanks,

Kevin
TWM

SwampAss

08-16-2007, 11:44 AM

Ships in two weeks!

TWM Performance

08-16-2007, 12:54 PM

Ships in two weeks!

Yup, we're on schedule so we should be able to make the August 30th ship date. I'll keep you posted if there are any delays, but all is good so far.

Thanks for your orders guys!

Kevin
TWM

uncletime

08-16-2007, 02:51 PM

Im ubber excited! Especially since TWM has treated me so well in this ordering process. kudos to them.

TWM Performance

08-16-2007, 03:09 PM

Im ubber excited! Especially since TWM has treated me so well in this ordering process. kudos to them.

Thanks :)

Kevin
TWM

ZooMIN3

08-17-2007, 08:55 PM

Kevin,

Will these TWM Short Shifters work with the 2008 models?

-J

CTGrey02

08-20-2007, 10:37 AM

Thanks for the clarification Kevin.

TWM Performance

08-20-2007, 11:46 AM

Kevin,

Will these TWM Short Shifters work with the 2008 models?

-J

Hi ZooMIN3,

The short shifter should work in the 2008 models no problem. Our testing has been done with the 2007's but Mazda generally keeps shifter assemblies for several years without change. For example, the Mazda 3, Mazda 6, and Protege shifters all work in every year.

Thanks,

Kevin
TWM

ZooMIN3

08-20-2007, 01:33 PM

Hi ZooMIN3,

The short shifter should work in the 2008 models no problem. Our testing has been done with the 2007's but Mazda generally keeps shifter assemblies for several years without change. For example, the Mazda 3, Mazda 6, and Protege shifters all work in every year.

Thanks,

Kevin
TWM

Sweet; thank you Kevin; I'll be sure to put my order in!

-J

TWM Performance

08-20-2007, 02:08 PM

Sweet; thank you Kevin; I'll be sure to put my order in!

-J

No problem, thanks.

Kevin

krnage

08-20-2007, 05:20 PM

can't wait for this, waiting for the prototype to hit Australia and my friend to test it on his 2.3. May even do a quick test fit on my MS3

Rotus8

08-20-2007, 05:44 PM

can't wait for this, waiting for the prototype to hit Australia and my friend to test it on his 2.3. May even do a quick test fit on my MS3
2.3 and MS3 have different shifters, they are not interchangeable.

krnage

08-20-2007, 06:04 PM

sorry, just assumed that we would understand that my friend owns the 6 speed 2.3 MZ3, so it better fit or ill test fit it up to my MS3 and let TWM know if there are any modifications to fit RHD

TWM Performance

08-23-2007, 02:13 PM

Hi Guys,

Production is on schedule and we should be shipping in 1 week from today. Just an FYI for those who have pre-ordered or if you're considering ordering, we have just added the install manual to the website. Check out this page and scroll to the bottom, there is a download link for the manual:

TWM Mazda Speed 3 Short Shifter (http://www.twmperformance.com/shortshifters/mazdashortshifters/mazdaspeed3shortshifters.htm)

Thanks,

Kevin
TWM

Kosh

08-23-2007, 02:16 PM

knowledge007

08-24-2007, 07:13 AM

SwampAss

08-24-2007, 07:20 AM

Can someone please explain to me why this product is double the amount of the MS6 stage II short shifter. What a bummer... If this product would have been the same amount considering its the same engine I would have picked this up in a heart beat. I thought this would be a decent inexpensive item that I was waiting to pick up. I could buy a CAI for this amount and atleast put some hp and tq to the wheels...

says the man with a blow off valve. (sun)

knowledge007

08-24-2007, 07:53 AM

Hehe atleast I get my nice little whistle and whoosh sound...

(rockon)

SwampAss

08-24-2007, 09:10 AM

I get 30% shift throw reduction and almost 2 inches in reduced shifter height! :-p

TWM Performance

08-24-2007, 10:10 AM

Can someone please explain to me why this product is one hundred dollars more than the MS6 stage II short shifter. What a bummer... If this product would have been the same amount considering its the same engine I would have picked this up in a heart beat.

This is a post I made earlier in this thread, it should answer your question:

I just PM'd you Abaddon, but this is a question we're getting quite a bit so I'll go ahead and post basically what I sent you:

The MazdaSpeed 3 short shifter (http://www.twmperformance.com/shortshifters/mazdashortshifters/mazdaspeed3shortshifters.htm) is more expensive than other short shifters we manufacture because of it's complexity, mainly due to the reverse lock since it is a 6 speed.

For example, the MazdaSpeed 6 short shifter consists simply of an adapter plate and the top portion of the shaft, and the regular Mazda 3 short shifter consists of a pivot ball, shaft and laser cut plate. The MazdaSpeed 3 short shifter consists of the entire shifter mechanism comprised of the main pivot ball and side arm, main body of the reverse lock cylinder, several machined delrin bushings, the reverse lock spring, reverse lock guide pin, laser cut and CNC bent plate, and the upper shaft which slides in and out of the main body of the reverse lock cylinder.

The complexity of the short shifter and additional moving parts are the factors which contribute to the additional cost. Most short shifters we manufacture are relatively simple machined shafts, pivot balls, and laser cut plates but the Speed 3 short shifter has a great deal more CNC machining time involved due to the reverse lock.

I hope this answers you questions, please let me know if you have any additional questions or concerns.

Thanks,
Kevin
TWM

jam_asian85

08-24-2007, 10:44 AM

JUST A COUPLE MORE DAYS OF WAITING !!! aaaaaaaaah hahahahaha (nailbyt)

knowledge007

08-24-2007, 01:21 PM

Kosh

08-24-2007, 02:11 PM

JUST A COUPLE MORE DAYS OF WAITING !!! aaaaaaaaah hahahahaha (nailbyt)

(cabpatch) wish I would have paid the extra $$ for faster shipping

SwampAss

08-24-2007, 04:07 PM

Aren't you in Jawja? I got my shit in 2 days from them last time.

jam_asian85

08-24-2007, 05:32 PM

(cabpatch) wish I would have paid the extra $$ for faster shipping

i know right !!! lol

Ryz

08-25-2007, 11:39 AM

... I have alot more questions regarding the justification for the 100 dollar increase over the stage II MS6 shifter. But I will leave it alone and just wait for when the time comes and hopefully it will be a little bit cheaper.

Since TWM chimed in and let you know, what else are you hoping to hear. That it comes with a free BJ?(bj)

knowledge007

08-25-2007, 12:26 PM

We can only hope for your sake.

lebox97

08-25-2007, 12:57 PM

that's a pretty rude comment on a public forum don't you think???!!!

if you don't like the price - don't buy it = very simple!

knowledge007

08-26-2007, 01:10 PM

Thats exactly what this is a "Public Forum". There is nothing wrong about expressing my own opinion in a decent manner. So bite me.

AeroSquid

08-27-2007, 12:07 AM

that's a pretty rude comment on a public forum don't you think???!!!

if you don't like the price - don't buy it = very simple!

are you new to the internets? i didn't think it was rude for a public forum at all.

lebox97

08-27-2007, 08:00 AM

...

guess I'll have to do that in person sometime ... being I too am in Miami - (moon)
but, so sorry, my comment was based upon the previous BJ comment being inappropriate, not yours.

irregardless - no one is forcing anyone to buy anything, so why spoil a sponsoring vendors sales thread by repeatedly (and publicly) asking a vendor to justify their pricing? Don't like it don't buy.

(PS: have been active on the internet for over 20 yrs)

Thats exactly what this is a "Public Forum". There is nothing wrong about expressing my own opinion in a decent manner. So bite me.

SwampAss

08-27-2007, 09:24 AM

Just as you say "don't buy it" to the TWM short shifter, perhaps "don't read it" applies to the BJ comment. I don't honestly think his comment will hinder sales on this item. REGARDLESS of what you may think. <--- Another fellow long time internet member. (birthday)

Back on topic....ships this week! I'm stoked!

knowledge007

08-27-2007, 09:46 AM

...

guess I'll have to do that in person sometime ... being I too am in Miami - (moon)
but, so sorry, my comment was based upon the previous BJ comment being inappropriate, not yours.

irregardless - no one is forcing anyone to buy anything, so why spoil a sponsoring vendors sales thread by repeatedly (and publicly) asking a vendor to justify their pricing? Don't like it don't buy.

(PS: have been active on the internet for over 20 yrs)

Excuse me, but if you have been active on the internet for over 20 yrs then I would hope that you can read posts correctly. Where did I "REPEATEDLY" ask the vendor to justify? Please do explain.

BTW, about that "in person" thing, is that some kind of a threat? Would love to see that in person. Since you are in Miami as well...

ZooMIN3

08-27-2007, 12:15 PM

Excuse me, but if you have been active on the internet for over 20 yrs then I would hope that you can read posts correctly. Where did I "REPEATEDLY" ask the vendor to justify? Please do explain.

BTW, about that "in person" thing, is that some kind of a threat? Would love to see that in person. Since you are in Miami as well...

(drinks) Let's all just take a chill pizzle and go have a few rounds!? lol

I tried to place my order this morning, damn cc was addressed to my parents house; so it fell through. Gonna order again this week when my cc clears. dammit...lol

-J

Can't wait to get it!! YEY YEY!!

Refonbass

08-30-2007, 09:56 AM

so are these things shipping today or what?

TWM Performance

08-30-2007, 03:49 PM

so are these things shipping today or what?

Yes, as promised the MazdaSpeed 3 short shifters (http://www.twmperformance.com/shortshifters/mazdashortshifters/mazdaspeed3shortshifters.htm) are shipping out today. We just finished packing them and they are waiting for UPS to pick them up. Everyone should receive a UPS tracking number by e-mail by the end of the business day.

Thanks for your orders guys!

Thanks,

Kevin
TWM

Kosh

08-30-2007, 03:50 PM

Yes, as promised the MazdaSpeed 3 short shifters (http://www.twmperformance.com/shortshifters/mazdashortshifters/mazdaspeed3shortshifters.htm) are shipping out today. We just finished packing them and they are waiting for UPS to pick them up. Everyone should receive a UPS tracking number by e-mail by the end of the business day.

Thanks for your orders guys!

Thanks,

Kevin
TWM

My hero :)

meha11

09-01-2007, 11:36 AM

We feel that keeping production in North America is important not only for the local economy, but it also ensures very tight quality control and fast turn around. Quality is our top priority, and we're proud to be one of the few remaining aftermarket companies who still manufacture in North America.

Touché!

please don’t forget to ship mine a little late so its not sat at my door while i’m away on my hols.

Mike.

funkyman

09-01-2007, 11:50 AM

Buy a shifter,send it off to China and they`ll make you an identical couple of hundred for 30usd each :-)The trouble is you`ll have to buy 4 so you can change it every 6 months after breakage

Just joking.

funkyman

09-01-2007, 11:55 AM

Howabout a group buy for 189usd each.Howmany persons do you need for 189usd ,20 people perhaps.If you can do it i`ll start a thread instead of these individual buyers so everyone in this thread pls stop all purchasing so we can get a good deal together.

jam_asian85

09-02-2007, 11:18 PM

*sigh* 5 more days :( lol

SwampAss

09-02-2007, 11:28 PM

hahah SUCK IT FLORIDA! Mine will be here wed

Ryz

09-03-2007, 11:10 AM

...but, so sorry, my comment was based upon the previous BJ comment being inappropriate, not yours.

What are you, 10 years old?

truggs

09-03-2007, 09:52 PM

I was lucky enough to get mine on Friday. After about a 30 minute install all I can say is the shfter and bushings were well worth the price. The shifter with the solid bushings installed has a more mechanical feel which is very nice.. Shifts are much shorter then stock and the overal height is perfect for me.

jam_asian85

09-04-2007, 12:34 AM

hahah SUCK IT FLORIDA! Mine will be here wed

poooooooooo on youuuuuuuuuuuuuuu!!! LOL ... not kool :(

I was lucky enough to get mine on Friday. After about a 30 minute install all I can say is the shfter and bushings were well worth the price. The shifter with the solid bushings installed has a more mechanical feel which is very nice.. Shifts are much shorter then stock and the overal height is perfect for me.

hey how was the overall install, shouldnt be that hard since it took you 30 mins ... hmmmmmmm any tips ???

jhowey

09-04-2007, 10:46 AM

Mine shows it wont be here for another week, but I cheaped out and slow boated it. :(

uncletime

09-04-2007, 01:58 PM

did you guys get an email stating it was shipped with a tracking number? because i havent.

jhowey

09-04-2007, 02:00 PM

Yeah I did.

uncletime

09-04-2007, 02:06 PM

yeah that sux that i havent... i just tried calling them and no answer

Kosh

09-04-2007, 02:20 PM

did you guys get an email stating it was shipped with a tracking number? because i havent.

I didn't, but I sent a PM to Kevin and in under 2 minutes he replied with my tracking number.

ZooMIN3

09-04-2007, 02:27 PM

UPS has mine for action...expedited! YEY YEY!!

Thanks Brenda for the decals too!!!

-J

uncletime

09-04-2007, 03:06 PM

yea i got a hold of them.... everything is straightened out

jam_asian85

09-05-2007, 03:58 PM

2 more daaaaaaaaaaaaaaays !!! :D (cabpatch)

jam_asian85

09-06-2007, 03:10 PM

2 more daaaaaaaaaaaaaaays !!! :D (cabpatch)

came here sooner that UPS estimated !!! cant wait to go home to see that TWM box :D (cabpatch)

uncletime

09-06-2007, 03:41 PM

mine was sched to be delivered yesterday (9-5-07) my bday i was estatic... until i got home to see no package and when i went online to track it, ups decided to stop in ct from jersey and then decided to take it to mass. now its supose to be here today. which i dont see happening considering when my roommate left the house at 1 it still wasnt there. ups can suckles on my assles

jam_asian85

09-06-2007, 03:44 PM

uncletime

09-06-2007, 04:21 PM

sorry to hear that uncletime, but hey Happy Belated !!! :D
well look at it as a late bday gift, better late than never huh ;)

thanks man! yeah youre right all the way

ZooMIN3

09-06-2007, 11:26 PM

Gots mine from UPS! yey yey!

http://i61.photobucket.com/albums/h69/Focusondz/DSCF3081.jpg

http://i61.photobucket.com/albums/h69/Focusondz/DSCF3082.jpg

http://i61.photobucket.com/albums/h69/Focusondz/DSCF3083.jpg

I'll install it tomorrow sometime since I don't have any White lithium based grease readily handy....

If you haven't gotten your STS yet, be sure to have these tools handy...

Per TWM Performance Install Manual
-Philips Screw Driver
-1 small and 1 large flate head screw driver
-8mm and 10 mm socket
-Ratchet with extension
-Needle nose pliers or needle nose vice grips
-T-20 Torx screwdriver bit
-White Lithium based grease (recommended)
-extra set of hands (another person for you smart asses!) lol

-J

jam_asian85

09-06-2007, 11:51 PM

hmmmmmmmmmm judging by zooMIN3's second picture, I'm missing a shift knob !!! :mad:

just kidding :D, lol

ZooMIN3

09-07-2007, 10:18 AM

(thumb)(lol)
hmmmmmmmmmm judging by zooMIN3's second picture, I'm missing a shift knob !!! :mad:

just kidding :D, lol

Kosh

09-07-2007, 12:53 PM

Aww I don't think I got any stickers :( Red wouldn't really go with cosmic blue anyway.

ZooMIN3

09-07-2007, 01:34 PM

Aww I don't think I got any stickers :( Red wouldn't really go with cosmic blue anyway.

Yeah bro, when I placed my order, I got a receipt in my email inbox. On that receipt it showed "Decal Color: None" I was like, huh? I didn't see that option when ordering.

So I sent a reply back to TWM Performance and asked for a bronze or red one. Brenda, one of the cool peeps there replied saying that they didn't have them in bronze and sent me the red ones I requested. Cool yo! (burnout)

-J

jam_asian85

09-07-2007, 10:14 PM

I'd like to give a shout out to TWM Performance, thanks for this wonderful product !!! The instructions were EXACT and STRAIGHT foward, and it was really thoughtful of you guys to supply us with the paperclips, saved me sometime, it would have been nice if there was a little tube of that grease you guys recommended (LOL just joking) now I have a tube of grease laying around the house. ^-^ anywaaaaaays THANKS again guys :D

Stock Shifter
http://i203.photobucket.com/albums/aa175/jam_asian85/IMG_3717.jpg

TWM Short Shifter
http://i203.photobucket.com/albums/aa175/jam_asian85/IMG_3723.jpg

krnage

09-09-2007, 03:33 AM

cant wait for my shortshifter now that i know it fits RHD!!!!!

TWM Performance

09-11-2007, 03:53 PM

I'd like to give a shout out to TWM Performance, thanks for this wonderful product !!! The instructions were EXACT and STRAIGHT foward, and it was really thoughtful of you guys to supply us with the paperclips, saved me sometime, it would have been nice if there was a little tube of that grease you guys recommended (LOL just joking) now I have a tube of grease laying around the house. ^-^ anywaaaaaays THANKS again guys :D

Thanks for the props and the pics, glad to see you like the short shifter (http://www.twmperformance.com/shortshifters/mazdashortshifters/mazdaspeed3shortshifters.htm) :) We decided to include the paperclips just in case people did not have any handy, they certainly make the install easier.

Kevin
TWM