Mazda6 Passenger side mount

[MrTea]

had a quick questions about "options" for the passenger side engine mount? i've got an '03 6i and figured you guys might have some options coming from your race experience.

my stock oil filled mount finally gave way and i'm currenlty planning on piecing together some frankenstein concoction to put in it's place. but if you guys have prehaps just a solid options or insert that would obviously be an easier way for me. my car is slowly moving to just a track setup, so don't really care about vibration too much.

anyhow, any info would be great. i could swing by the shop also if there were an option available.

[nicole@Tri-Point]

We use the stock mount and stiffen it up with urethane so its movement is limited. We also do it with the driver’s side one also. For the lower one we machine a Delrin bushing to replace the large rubber end.

[MrTea]

any chance you guy's sell them modded like that? or you'd someone be able to shoot me an email if i can do this myself (have the window weld stuff that worked well on the tranny mount) to a "broken" mount?

i don't mind doing the work, but don't wanna pull it apart and then realize it's not possible.

[nicole@Tri-Point]

We can do them here. Materials and labor to do all the mounts your looking at $400.00. That does not include the stock mounts, which we would need to have. Its more costly to do all of them, then just one due to the cost of the materials.

[MrTea]

wait, i only need the passenger mount. the rear had been replaced, i swapped in a ford mtx and we did a custom mount for the tranny side....all i need is the passenger.

i did a quick job on mine, pulling out all the oil, and then filling with window weld (poor mans urethane) and will see how that holds...though i don't forsee long. i can grab the stock mount pretty cheap, so having that one done by you guys might still be an option if not crazy expensive. wondering what is involved and if there are any pics? i have a few shots of the engine from last year at laguna, so i'll see what i can dig up also.

thanks again for the update