GI: 626 single runner intake manifolds & V.C.'s

[bpt323]

I currently have 4-- 626 single runner intake manifolds

I can grab 626 valve covers (normal!! no cam drive holes sorry)

Let me know if you have interest in either of the above.
Im going to the yard tommorow.

Ryan

[crashkelly]

I currently have 4-- 626 single runner intake manifolds

I can grab 626 valve covers (normal!! no cam drive holes sorry)

Let me know if you have interest in either of the above.
Im going to the yard tommorow.

Ryan

what years are the manifolds? and do they have the EGR tubes?

[Rally Ninja]

Subin
Is the valve cover necessary to run the manifold or something?

[crashkelly]

Subin

soon the MSP vultures will begin to circle just because of the numbers 626 haha

[DubbyDoo]

those aren't the protege garage ones and i think they require the fuel rails to work on the protege 2.0s if im not mistaken

[Rally Ninja]

doh so its probably not the 2000 626

[crashkelly]

doh so its probably not the 2000 626

they are definately pre-2000, but you could still use them...just need a fuel rail and some tweaking.

[bpt323]

actually i think one of them was from a 2000+ it had the camsensor VC but some jackass smashed it with a hammer pre me getting there.

so what fuel rails do you need for these

I was under the impression the EGR tube from the 626 didn't work for the MSP system.

Ken needs to give his wisdom here. cause im lost on what id need to get extra for these to work properly.

[BradC]

If one is a 00+ mani, let me know what you are asking...

[Alejo_NIN]

on the pre 2000 manifold, check my signature :)

[Crazee D]

http://www.mazdas247.com/forum/showthread.php?t=123654257

Not plug and play

[Alejo_NIN]

unfortunately true, not P&P

but it works..

[daonly1around]

so the plug an play ones are 2000+ correct?

[bpt323]

so no desire for these???

[Alejo_NIN]

what are u asking for them?

[crashkelly]

what are u asking for them?

finally the million dollar question!

[Alejo_NIN]

lol.....more than 50 is a rip off let me tell you

[bpt323]

so you feel $50+ shipping is a good price then?

[bpt323]

bump, someone besides the metal scrap yard has to want these.

[bpt323]

$60 shipped??=$40 manifold/$20shipping????

make me an offer folks i really want these gone.

[low_psi]

I'll gladly take a 2000+ manifold off your hands for $60 if you can find one.

[bpt323]

im sure you would^

Last Chance! $30+ shipping /Best offer

[low_psi]

I'll give you a $100, so let me know if you find one.Not having much luck locally.

[bpt323]

this is not an auction for manifolds i don't have.

Im dissapointed enough that i was ill informed & grabbed these to begin with.
these will be melted down for scrap. im sick of dicking around attempting to sell somehting no one wants.

[ItsSlow]

If you had the fuel rails, Im sure they would have been sold..

[bpt323]

i doubt it, you 3rd gen guys are of a different breed/world seems most lack inititive & creativity, but seemingly preferr everything on a silver platter.

[bpt323]

have a mod close this thread, the manifolds are going to the scrap yard i might get part of my money back @ least that way.

[low_psi]

i doubt it, you 3rd gen guys are of a different breed/world seems most lack inititive & creativity, but seemingly preferr everything on a silver platter.

why pay $50 for a part that needs modification when you can buy a "drop-in" part for just alittle more?

[metallargy]

i doubt it, you 3rd gen guys are of a different breed/world seems most lack inititive & creativity, but seemingly preferr everything on a silver platter.


If they went to the junkyard to find the fuel rail ... they'll find it attached to the IM.
So there's no point of buying your manifolds if they can simply pull that, too, while they're snagging the rail.

There's no aftermarket variant of those generation fuel rails, so it's either OEM or custom machining.

I don't know why you're knocking 3rd Genners ... you're the genius that tried to make a profit by pilfering junkyards cars and not getting everything that's needed.
Anybody that goes to that same junkyard now looking for that part will find out that somebody already stole half of it, rendering their time & effort useless.

Instead of crying, go get the other pieces.
You already said you were going back to the yard, anyway.
If you want to make a profit, get off your ass and finish what you started.
Trashing those pieces because of your greediness would be a waste.

[Alejo_NIN]

exactly...

that's why even tho i "thought" i didn't need the fuel rail, i still got it....turns out is a MUST

[bpt323]

the junkyard i went to is 5 hours away & out of state jackass. I went back the next day after i posted that & its been how long since.

I was misinformed over the phone in the JY otherwise i wouldn't have even bothered to grab them in the first place. you can't blame a guy for trying to make even for his losses.
besides its much much easier to pull a top mounted fuel rail with a few bolts then to remove a whole manifold. i fail to see why it would be so damn difficult to go get the fuel rail for this anyhow if someone was determined enough & wanted the manifold they would take nessicary measures.
& why hasn't a mod closed this thread yet?

[Antoine]

Im dissapointed enough that i was ill informed & grabbed these to begin with.
these will be melted down for scrap. im sick of dicking around attempting to sell somehting no one wants.

Point made...Thread closed.