PDA

View Full Version : Stebel Nautilus Air Horn Install



Tronix102
07-09-2007, 07:45 PM
Hey guys,

I just got my stebel air horn and I'm having a problem hooking it up. I didnt mount it yet or anything because I gotta find a spot but I am trying to follow the directions and the mazda 3 horn only has 1 wire going to it and the directions are showing of course 2 wires coming from an old horn. Has anyone done this install on their 3 that can help me out?

Thank you very much!!

Pics from the Install:

http://www.xenonflux.com/images/DSC00264.JPG
http://www.xenonflux.com/images/DSC00266.JPG
http://www.xenonflux.com/images/DSC00267.JPG
http://www.xenonflux.com/images/DSC00268.JPG
http://www.xenonflux.com/images/DSC00269.JPG

musiclikscreams
07-09-2007, 07:53 PM
oh i looove this horn. the 2nd wire is a ground wire. just find a screw that goes into metal and put the wire through the hole and screw the screw back in.

Tronix102
07-09-2007, 07:54 PM
There is no second wire ...

Rotus8
07-09-2007, 08:00 PM
You have to make a wire with a connector for the horn on one end and another connector on the other end that goes to a screw on the frame of the car.

There's been lots of discussion about the installation. Do a search on nautilus.

Tronix102
07-09-2007, 09:53 PM
I have and found nothing usefull..anyways I figured it all out on my own and I took pics...I'll upload them asap.

Rotus8
07-10-2007, 12:42 AM
I have and found nothing usefull..anyways I figured it all out on my own and I took pics...I'll upload them asap.
Look here:
http://www.mazdas247.com/forum/showthread.php?t=123672497&highlight=nautilus

Tronix102
07-10-2007, 07:50 AM
looked at that one ... didnt really help.

Rotus8
07-10-2007, 05:22 PM
I connected my power wire up as shown in the pic. You need a "midi" fuse and a couple of M5 nuts. Connecting to the battery works fine, but this is cleaner and safer.

Tronix102
07-10-2007, 05:43 PM
thanks all ... works perfect now... i will try to install the power on the block like you have with the midi fuse

Siscim23
07-19-2007, 11:54 AM
Wow I'm convinced with that sound clip! Just need to get about $35 together...

KCspeed3
07-20-2007, 12:00 PM
I have my Nautilus mounted and drew up a diagram to run by you all. Is this ok for wiring?

Rotus8
07-20-2007, 12:22 PM
Looks good. Make sure to observe the polarity on the horn too.

IrishMidak
07-20-2007, 02:37 PM
Wow I'm convinced with that sound clip! Just need to get about $35 together...

Tha sound clip does no justice to it. When I first hit it I was in our body shop and let's just say the echo was mind numbing.

Siscim23
07-21-2007, 06:32 PM
Tha sound clip does no justice to it. When I first hit it I was in our body shop and let's just say the echo was mind numbing.

Haha even better!