Side marker light

[JasonBourne]

Hi, someone can put a how to removal the side marker lights of the fender
i need some pics of it
Thx.
(bang)

[MsP155]

well the way i did it was get a flat head screw driver and with the flat head push from the front of the car back and up and it should just release. the base of the side marker is just a sqeeze release thingy

[Mounty]

I just took mine out today, and the way to do it is to slide the unit towards the back of your car and it should release. I did not use a screw driver, but if that helps, use it.

There is instruction in the owner's manual as well (for my Pro5 that is, not sure about MSP).

[iknospd3]

nice thank god for searches i was just going to post bout this

[Mark94]

Don't use a screwdriver!!!! Why risk slipping and slicing into your paint. Just do as mentioned, push the light towards the back of the car, once it has moved towards the back, lift the end that is closest to the front of the car forward and it should lift out.

Mark

[Rush]

Don't use a screwdriver!!!! Why risk slipping and slicing into your paint. Just do as mentioned, push the light towards the back of the car, once it has moved towards the back, lift the end that is closest to the front of the car forward and it should lift out.

Mark
Honestly .. Why would you even consider using a screwdriver? The thought alone makes me cringe.

[sean22306]

+1 they are really easy to take out by hand. I was surprised how easy it was when I took mine out.