daonly1around
05-08-2007, 11:59 AM
OK, so i'm taking off the front spindles of my wrecked P5 to put on my LX. (among other things) I have disconnected the sway bar, sturts tierod ends, tension bolt where the ball joint mounts and drive shaft from the spindle. Manually using forks i can get the spindles to come off about 1/2-3/4 the way off. Right now the top of the lower ball joint is sitting half way out of the hole it mounts to on the spindle, and i cannot get any more leverage with the forks. Any suggestion to get them the rest of the way off?(shrugs)