Try this one

[ZMN BY U]

Well I happen to work for a mazda dealership and a few of my techs said you can disable the dsc on this car by holding the dsc button in for 10 secs or so and it disables the dsc no more light or traction control. So i did today hey it worked just thought i would pass it on. There are a few more items im trying to get out of them but no such luck so far.

[SharkDiver]

My RX8 was the same way.Its been discussed,Thanks tho.

[voiceKoil]

My RX8 was the same way.Its been discussed,Thanks tho.


I thought it was discussed that it still doesnt turn off all the way if you do that? That no matter what it stayes on, I tried it before but I didnt run it long enough to notice a difference.

[dread]

I posted this a couple of months back, no one seemed to care on this forum. Its interesting that the techs say it does turn off the dsc and traction control. You can also just press the dsc button right after starting the car.

[assman]

If you do this then what do you do to turn it back on?

[Rotus8]

If you do this then what do you do to turn it back on?
You have to cycle the ignition. Best done while stopped.

[assman]

cycle ignition? You mean just turn car off then on?

[dread]

all you have to do is press the button again.

[zoom-zoomhatch]

So does this really do anything different from just pushing the button?

[clos561]

ive done it both times and when its "completely" turned of with the dsc light on and the lil swirving car on it spins tires more often and easier when going to 3rd which is usualy rare when the dsc is on or jsut button pushed off

[gsrtype1]

(direct) You have to cycle the ignition. Best done while stopped.

[Rotus8]

(direct)
Sorry - turn ignition off, then turn it back on again.

[udontknowjack]

this is so yesterday....(poke)

[speed3shon]

when i did it, and started to spin, the traction control cut power as if it werent off...