for sale mpi, p5 ecu, kartboy hangers, non mazda good's sony psp

[ebmp5]

all sales are final!! bid's are 1 day only then will go the next person just to be fair. i accept paypal, or any other way u would like to pay. paypal would be best to protect your self and me. i have sold here before and i am very honest. i will ship as soon as payment is completed. u will get a ups tracking number the day i ship your item. also i will pay for anything ship to be signature required i don't want it lost or stolen so we won't have any problems. thanks for looking and hope u help a brotha out.



MPI-!280shipped but willing to negociate, yes u can get it cheaper. if u need direction's for it or software it is here on the forums. also there are lot's of member's that have alot of knowlege about this piggy back. bigtimm help me with it so i just counted on him when. it came to tunning. if i can remenber when i had my turbo it put down 181hp this was at 5psi (meagan catback and 3inch downpipe with the MAM sleeper kit) it would have put more down but finnaly found out the the innercooler had a big hole in it. SOLD!

p5 ecu- 75 shipped. i got this form a member here it is not flashed and has less than 25,000 mile's on it.


kartboy bushing's- all of them are the 10mm one's 2 are brand new 2 are used.
15 bucks shipped. SOLD!

psp-$165 i bought it of craiglist from some lady but used it like twice it is in excelent shape and plus u get all the games with it as well oh and i do have the charger just forgot to include it on the pic if this is a problem mod's let me know. aslo comes with a 256mb card and a 32mb card. sold!!


everything includes paypal fee's !!!!!!!!!!

so pm me.

[ebmp5]

Bump!!!!!

[whitemp5seattle]

kartboy sells their hangers for $28 shipped from their website...but they sell them as a set of 2x10mm and 2x12mm...

[ebmp5]

kartboy sells their hangers for $28 shipped from their website...but they sell them as a set of 2x10mm and 2x12mm...

oh k my bad will edit

[whitemp5seattle]

yours are all 10mm? no 12mm ones?

$15 is a good price - I just bought mine this past week! oh well...someone's gonna get a great deal!

[zoomzoom510]

yours are all 10mm? no 12mm ones?

$15 is a good price - I just bought mine this past week! oh well...someone's gonna get a great deal!

whats the diff between thi the 10mm and the 12? stiffness or .fitment ?

[whitemp5seattle]

size I think...you're sure both are 10mm? did they both fit on your car?

[mazdaspeed777]

So the Kartboy bushings are actually exhaust hangers then? Not shifter bushings correct?

[ebmp5]

So the Kartboy bushings are actually exhaust hangers then? Not shifter bushings correct?

yup just the exhaust hanger's

[ebmp5]

yours are all 10mm? no 12mm ones?

$15 is a good price - I just bought mine this past week! oh well...someone's gonna get a great deal!

the 12mm one's are on my stock exhaust i kept those on

[ebmp5]

size I think...you're sure both are 10mm? did they both fit on your car?

yEAH they both are.

[ebmp5]

bump!!!

[mazdaspeed777]

Does anyone have kartboy hangers for a mazdaspeed axleback? If so which works better for this set-up 10mm or 12mm?

[zoomzoom510]

Does anyone have kartboy hangers for a mazdaspeed axleback? If so which works better for this set-up 10mm or 12mm?

i have the mazdaspeed axle back exhaust. so will this fit on the 10mm? cuz. i dont want to buy and not work. need all the infor.

[mazdaspeed777]

i have the mazdaspeed axle back exhaust. so will this fit on the 10mm? cuz. i dont want to buy and not work. need all the infor.

That is what I am trying to find out and what I just asked

[BlueWolfCry]

For the exhaust hangers, you are supposed to use ALL 4 hangers. One size is for the front hanger, one size for the back hanger. So really, he has one set of hangers

[whitemp5seattle]

however, the fronts are 10mm and the rear exhaust hangers are supposed to be 12mm...

[ebmp5]

That is what I am trying to find out and what I just asked

they are exhaust hanger's they should fit a msp, p5, mp3, protege.

(this is form kartboy)
The Kartboy Hangman Exhaust Hangers are a direct replacement for the stock pieces on all Mazda Protege and Mazda 6 vehicles built in the recent past. The benfits of this modification are reduced swaying of both stock and aftermarket exhaust systems, and a longer life vs. natural rubber. These pieces were computer designed and analyzed to allow minimum movement, while retaining the stock packaging requirements. Available as a complete set.

Made in USA.

[ebmp5]

however, the fronts are 10mm and the rear exhaust hangers are supposed to be 12mm...


yup and all i have is the 10mm but if u go to kartboy.com and look at the exhaust hanger picture. the difference is the size of the hole's.

[rednecks_r_us]

Wish I had the money for the MPI. Good luck with it.

[whitemp5seattle]

yup and all i have is the 10mm but if u go to kartboy.com and look at the exhaust hanger picture. the difference is the size of the hole's.

exactly. basically to make this a full set all one would have to do is slightly enlarge the holes on 2 of the 10mm hangers to make them 12mm holes.

[ebmp5]

Wish I had the money for the MPI. Good luck with it.
thanks bill

i saved it for u for a while. :( if. it doesn't go u still have dib's

[rednecks_r_us]

If I had the money I would be knocking on Big Tim's door begging him to help me install and tune.

[ebmp5]

If I had the money I would be knocking on Big Tim's door begging him to help me install and tune.

u know he would dude. i so know with your mod's u can get that puppy up to at least 130 with a good tune.

[ebmp5]

bump !

[ebmp5]

bump 2 more to go!!!!!

[ebmp5]

willing to sell mpi for less pm me a bid!!

[ebmp5]

Bump!!395 Shipped

[Keno1542]

does the mpi have the tm with it?

[ebmp5]

does the mpi have the tm with it?


what do u mean by the tm?

all u basically need for it is to install it and tune. now if u want more psi out of it u just have to change the resistor i belive.

[fLyPiNoY7]

turbo module...

[zoomzoom510]

how much for the mp5 ecu? shipped to 94587

[ebmp5]

how much for the mp5 ecu? shipped to 94587

75 buck's shipped.

[zoomzoom510]

exactly. basically to make this a full set all one would have to do is slightly enlarge the holes on 2 of the 10mm hangers to make them 12mm holes.


did exactly that, well now the exhaust rattles against the bumper. it swings i mean it doesnt stay in one position it is sliding around and about. i guess when i turn on corners or whatever. i think it would have been best if i kept it 10mm . ohh well.

[i12drivemyMP5]

did exactly that, well now the exhaust rattles against the bumper. it swings i mean it doesnt stay in one position it is sliding around and about. i guess when i turn on corners or whatever. i think it would have been best if i kept it 10mm . ohh well.Do what everyone else has done. Buy some really small hose clamps & put them on each hanger stalk on the exhaust side not the body side, one on each side where it cannot slide. One keeps it from going right, the other keeps it from going left. Just push them up against the hanger after you center the tip in the cutout. Even if you hadn't drilled them this would help keep things in place.

[zoomzoom510]

Do what everyone else has done. Buy some really small hose clamps & put them on each hanger stalk on the exhaust side not the body side, one on each side where it cannot slide. One keeps it from going right, the other keeps it from going left. Just push them up against the hanger after you center the tip in the cutout. Even if you hadn't drilled them this would help keep things in place.

yah i tried to do o rings. and even was gonna make an indentation for e-clips to keep it from moving.. so ill go to auto store now. thanks for the advice and idea. =)

[igdrasil]

Hey man, I know you want 75 for the ecu.

I offer 50 + flat rate usps.

Dont get me wrong, I only need it for the plug...